1. Introducció
This manual provides essential information for the safe and efficient operation of your Luceco LW50BG2-EU 50W LED Flat Work Light. Please read these instructions carefully before use and retain them for future reference. This work light is designed for professional and DIY use in various environments, including workshops and construction sites, offering powerful and energy-efficient illumination.
Figure 1: Luceco LW50BG2-EU 50W LED Flat Work Light. This image shows the work light from the front, with its main central light panel and two adjustable side panels illuminated, highlighting its compact and flat design.
2. Instruccions de seguretat
Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- Seguretat elèctrica: Assegureu-vos que la font d'alimentació voltage matches the product's requirements (240 Volts). Do not operate the light with a damaged cord or plug. Avoid touching the plug or light with wet hands.
- Col·locació: Position the work light on a stable, level surface. Ensure adequate ventilation around the unit to prevent overheating. Do not cover the light during operation.
- Ús exterior: The light has an IP54 rating, making it suitable for outdoor use and protected against dust and splashing water. However, avoid submerging it in water or exposing it to heavy rain for extended periods.
- Protecció ocular: Do not stare directly into the LED light source when it is illuminated, as this can cause eye strain or damage.
- Manteniment: Disconnect the power supply before cleaning or performing any maintenance. Refer to the maintenance section for detailed instructions.
- Nens i animals de companyia: Mantingueu el llum de treball fora de l'abast dels nens i les mascotes.
- Calor: While LED lights generate less heat than traditional halogen lights, the housing may still become warm during prolonged use. Allow it to cool before handling.
3. Contingut del paquet
Verifiqueu que tots els articles siguin presents i en bon estat en desempaquetar-los.
- 1 x Luceco LW50BG2-EU 50W LED Flat Work Light
- Integrated 2m H05RN-F3G Rubber Cable
- Manual d'instruccions (aquest document)
4. Característiques del producte
The Luceco LW50BG2-EU work light offers advanced features for versatile and efficient lighting:
- Alta eficiència energètica: Up to 90% energy saving compared to traditional halogen models.
- Il·luminació potent: Delivers 5000 lumens of bright, cool white light (6500K).
- Construcció duradora: Made from die-cast aluminum with a brushed aluminum finish, ensuring longevity.
- Protecció IP54: Rated for protection against dust ingress and splashing water, suitable for various work environments.
- Disseny ajustable: Features a single inclinable foot and adjustable side panels for flexible light positioning.
- Pre-wired Cable: Comes with a 2-meter H05RN-F3G rubber cable for immediate use.
- Funcionament sense manteniment: Designed for reliability with minimal upkeep required.
- Muntatge de trípode: Compatible with standard tripods for elevated lighting (tripod not included).
Figure 2: Product Dimensions and Adjustability. This diagram illustrates the overall dimensions of the work light (437mm width, 215mm height) and highlights the 180-degree rotation capability of the side LED panels.
5. Configuració
- Desembalar: Carefully remove the work light from its packaging. Inspect for any signs of damage.
- Posicionament:
- Autònom: Place the work light on a flat, stable surface using its integrated inclinable foot. Adjust the angle of the main light and the side panels as needed to direct illumination.
- Muntatge del trípode: If using a tripod (not included), securely attach the work light to the tripod's mounting point. Ensure the tripod is stable before operation.
- Connexió d'alimentació: Uncoil the 2-meter power cable. Plug the power cord into a suitable 240V electrical outlet. Ensure the outlet is properly grounded.
Figure 3: Work Light in Use. This image demonstrates the work light positioned on a ladder, providing illumination for a work area, showcasing its versatility in placement.
6. Instruccions de funcionament
- Encès: Once connected to a power source, the work light will illuminate instantly. There is no separate power switch; connection to the mains activates the light.
- Ajust de la direcció de la llum:
- Panell principal: The main central light panel can be tilted using the integrated foot mechanism to adjust its vertical angle.
- Panells laterals: The two side LED panels can be rotated up to 180 degrees horizontally to broaden the light spread or focus it in specific directions.
- Apagar: To turn off the work light, simply unplug it from the electrical outlet.
7. Manteniment
The Luceco LW50BG2-EU LED Flat Work Light is designed for maintenance-free operation. However, regular cleaning and proper storage will ensure its longevity.
- Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau i sec.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
- Emmagatzematge: When not in use, store the work light in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cable is neatly coiled to prevent damage.
- Inspecció: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and have it repaired by a qualified technician.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense font d'alimentació. Cable/endoll d'alimentació danyat. | Assegureu-vos que el cable d'alimentació estigui ben connectat a una presa de corrent de 240 V que funcioni. Comproveu l’interruptor automàtic. If the cord or plug is damaged, do not use the light; seek professional repair. |
| La llum parpelleja o s'atenua. | Font d'alimentació inestable. Problema amb el component intern. | Try plugging the light into a different outlet. If the problem persists, discontinue use and contact support. |
| Light gets excessively hot. | Poca ventilació. Falla interna. | Ensure the light is not covered and has adequate airflow. If overheating continues, unplug immediately and contact support. |
9. Especificacions tècniques
| Característica | Detall |
|---|---|
| Marca | Luceco |
| Número de model | LW50BG2-EU |
| Consum d'energia | 50 watts |
| Flux lluminós | 5000 lúmens |
| Temperatura de color | 6500 Kelvin (blanc fred) |
| Índex de reproducció del color (CRI) | 80 |
| Entrada Voltage | 240 Volts |
| Classificació de protecció | IP54 |
| Material | Fundició d'alumini |
| Tipus d'acabat | Alumini raspallat |
| Longitud del cable | 2 meters (H05RN-F3G rubber cable) |
| Dimensions (L x A x A) | 43.7 x 4.65 x 26 cm |
| Pes de l'article | 1.72 quilos |
| Components inclosos | 1 work light |
| Usos específics | DIY, private, professional |
Figure 4: Energy Label and Product Information Sheet. The image on the left displays the EU energy efficiency label for the Luceco LW50BG2-EU, indicating an 'F' rating and 50 kWh/1000h consumption. The image on the right shows a detailed product information sheet with various technical parameters.
Per obtenir informació més detallada sobre el producte, consulteu la base de dades EPREL: https://eprel.ec.europa.eu/qr/677572
10. Garantia i Suport
Luceco products are manufactured to high standards and are designed for durability. For warranty information, please refer to the terms and conditions provided at the point of purchase or on the official Luceco weblloc.
If you encounter any issues or require technical assistance, please contact Luceco customer support:
- Correu electrònic: support@luceco.com
- Weblloc: www.luceco.com
Please have your model number (LW50BG2-EU) and purchase details ready when contacting support.
