Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Memphis Audio SRXP62C SRX Pro 6.5 Inch Component Speaker System. Please read this manual thoroughly before attempting installation or operation to ensure proper function and longevity of your product.
The SRXP62C system is designed to deliver high-quality audio performance in a vehicle environment, featuring separate mid-bass drivers, tweeters, and passive crossovers for optimized sound reproduction.
Informació de seguretat
ADVERTIMENT: Advertència de la proposició 65
Aquest producte pot contenir substàncies químiques que l'estat de Califòrnia sap que causen càncer, defectes congènits o altres danys reproductius. Per a més informació, visiteu www.P65Warnings.ca.gov.
- Desconnecteu sempre la bateria del vehicle abans de començar qualsevol instal·lació elèctrica.
- Assegureu-vos que tot el cablejat estigui correctament aïllat i fixat per evitar curtcircuits i danys.
- No feu servir el sistema d'àudio a volums excessivament alts durant períodes prolongats, ja que això pot causar danys auditius.
- Consulteu un instal·lador professional si teniu dubtes sobre alguna part del procés d'instal·lació.
Contingut del paquet
Verifiqueu que tots els components siguin presents al vostre paquet:
- 2 x SRXP62 Mid-Bass Drivers (6.5 inch woofers)
- 2 x SRPT Tweeters
- 2 x Passive Crossovers
- Mounting Hardware (screws, clips, etc. - may vary)
Figure 1: The complete Memphis Audio SRXP62C SRX Pro 6.5" Component Speaker System, including two mid-bass drivers, two tweeters, and two passive crossovers.
Configuració i instal·lació
Una instal·lació correcta és crucial per a un rendiment òptim. Seguiu aquestes pautes amb atenció.
1. Mid-Bass Driver Installation
- Select a suitable mounting location in your vehicle, typically door panels or kick panels, ensuring adequate depth and clearance.
- Cut the mounting hole to the specified diameter (6.5 inches).
- Connect the speaker wires from the passive crossover's 'WOOFER' output to the terminals on the mid-bass driver. Ensure correct polarity (+ to + and - to -).
- Secure the mid-bass driver using the provided mounting screws.
Figura 2: Frontal view of the Memphis Audio SRXP62C 6.5 inch mid-bass driver.
Figura 3: Front inclinat view of the Memphis Audio SRXP62C 6.5 inch mid-bass driver, showcasing el con i els seus voltants.
2. Instal·lació del tweeter
- Choose a mounting location for the tweeters that allows for optimal sound staging, typically higher up in the vehicle's interior (e.g., A-pillars, dash).
- Depending on the tweeter's design, you may need to flush mount or surface mount. Follow the specific instructions provided with the tweeter mounting hardware.
- Connect the tweeter wires from the passive crossover's 'TWEETER' output to the terminals on the tweeter. Observe correct polarity.
Figura 4: Frontal view of the Memphis Audio SRPT Tweeter, showing the protective grille.
Figura 5: Angle view of the Memphis Audio SRPT Tweeter, highlighting its design.
3. Passive Crossover Connection
- Mount the passive crossovers in a secure, dry location, away from excessive heat or moisture.
- Connect the audio signal from your amplifier's speaker output to the 'INPUT' terminals on the passive crossover.
- Connect the 'WOOFER' output terminals of the crossover to the mid-bass driver.
- Connect the 'TWEETER' output terminals of the crossover to the tweeter.
- Ensure all connections are tight and secure to prevent signal loss or intermittent operation.
Figura 6: superior view of the Memphis Audio passive crossover, showing clearly labeled input, woofer, and tweeter terminals.
Figura 7: lateral view of the Memphis Audio passive crossover, illustrating the connection points.
Figure 8: Memphis Audio passive crossover with approximate dimensions (3.3"H x 11.7"W x 15"D) for installation planning.
Instruccions de funcionament
Once installed, follow these steps for initial operation:
- Encesa inicial: After verifying all connections, turn on your vehicle's audio system. Start with the volume at its lowest setting.
- Ajust de volum: Gradually increase the volume to a comfortable listening level. Listen for any distortion or unusual noises.
- Configuració d'àudio: Adjust your head unit's or amplifier's equalizer and balance/fader settings to achieve your preferred sound. Avoid excessive bass or treble boost, which can lead to distortion.
- Període d'entrada: Allow a break-in period of several hours of normal listening for the speakers to reach their optimal performance.
Manteniment
To ensure the longevity and performance of your speaker system, follow these simple maintenance tips:
- Neteja: Use a soft, dry cloth to gently wipe down the speaker grilles and surrounds. Avoid using harsh chemicals or abrasive cleaners.
- Inspecció: Periodically check all wiring connections to ensure they remain secure. Inspect speaker cones and surrounds for any signs of damage or wear.
- Factors ambientals: Protect the speakers from direct exposure to extreme temperatures, moisture, and direct sunlight, which can degrade materials over time.
Resolució de problemes
Si teniu problemes amb el vostre sistema d'altaveus, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so dels altaveus | Connexions de cablejat soltes o incorrectes Amplifier not powered on or in protect mode Head unit settings (e.g., fader/balance) | Comproveu tots els altaveus i amplifier connections for proper polarity and tightness. Verificar amplifier power and status indicators. Adjust head unit settings. |
| So distorsionat o poc clar | Volume too high, causing clipping Incorrecte amplifier gain settings Con d'altaveu o envoltant danyat | Baixa el volum. Ajusta ampajustos de guany del lificador adequadament. Inspect speakers for physical damage. |
| Un altaveu no funciona | Faulty wiring to that speaker Damaged speaker or crossover component | Check wiring for the affected speaker. Swap speakers or crossover components (if possible) to isolate the issue. |
Especificacions
Key technical specifications for the Memphis Audio SRXP62C SRX Pro 6.5 Inch Component Speaker System:
- Nom del model: SRXP62C
- Tipus d'altaveu: Component
- Mida de l'altaveu: 6.5 polzades (diàmetre del woofer)
- Potència de sortida màxima dels altaveus: 250 watts
- Impedància: 6.5 ohms
- Tecnologia de connectivitat: Coaxial (referring to the system type, not wiring)
- Mode de sortida d'àudio: estèreo
- Configuració del canal de so envoltant: 2.0
- Tipus de controlador d'àudio: Conductor dinàmic
- Usos recomanats per al producte: Cloth Treated (referring to surround material)
- Dimensions del producte: 3.15"D x 11.77"W x 15.12"H (Package Dimensions)
- Pes de l'article: 1.38 lliures
- UPC: 702588209249
- Fabricant: Àudio de Memphis
- Data de primera disponibilitat: 2 d'abril de 2019
Informació de la garantia
The Memphis Audio SRXP62C SRX Pro 6.5 Inch Component Speaker System comes with a Garantia limitada. Specific terms and conditions of the warranty, including duration and coverage details, are typically provided with your purchase documentation or can be obtained directly from Memphis Audio or your authorized dealer. Please retain your proof of purchase for warranty claims.
Suport
For technical assistance, warranty claims, or further information regarding your Memphis Audio SRXP62C SRX Pro 6.5 Inch Component Speaker System, please contact Memphis Audio directly or visit their official website. You may also reach out to your authorized dealer for support.
Fabricant: Àudio de Memphis
Weblloc: Botiga d'àudio de Memphis a Amazon (per a informació general del producte)
