1. Producte acabatview
El JBL Stage810 is an 8-inch car audio subwoofer designed to deliver high-output and low-distortion bass. It features a lightweight yet stiff polypropylene woofer cone with a hi-roll rubber surround, ensuring high efficiency and durability. This subwoofer is engineered to integrate effectively with various car audio amplifiers, providing a signature JBL sound experience.
Imatge 1.1: Frontal view de la JBL Stage810 subwoofer, showcasing the cone and JBL branding.
Característiques principals:
- High-output and low-distortion bass performance.
- Power handling capability of up to 800 watts peak power or 200W RMS.
- Frequency response range of 38 - 200Hz.
- Mounting depth: 6-15/16 inches (175mm).
- Lightweight yet stiff polypropylene woofer cone.
- Hi-roll rubber surround for durability.
2. Què hi ha a la caixa
Si us plau, verifiqueu que hi hagi tots els components en desembalar-lo:
- 1 x JBL Stage810 Subwoofer
- 1 x junta d'escuma
- Manual del propietari (aquest document)
- 2 x Two-color Brand Stickers
3. Configuració i instal·lació
Una instal·lació correcta és crucial per a un rendiment i una seguretat òptims. Es recomana que la instal·lació la realitzi un professional qualificat.
3.1 Consideracions de muntatge
Before mounting, ensure the chosen location in your vehicle provides adequate space and structural integrity to support the subwoofer. Consider the mounting depth of 6-15/16 inches (175mm) to avoid interference with vehicle components.
Imatge 3.1: Lateral view de la JBL Stage810 subwoofer, illustrating its mounting depth.
3.2 Wiring and AmpConnexió més viva
- Connexió d'alimentació: Connecteu el amplifier's power input directly to the vehicle's battery using an appropriate gauge power wire and fuse.
- Connexió a terra: Connecteu de forma segura el fitxer ampel terminal de terra del transformador a una superfície metàl·lica neta i sense pintar del xassís del vehicle.
- Encès remot: Connecteu el ampel terminal d'encesa remota de l'amplificador a la sortida remota de la unitat principal.
- Entrada de senyal: Connect the RCA outputs from your head unit to the RCA inputs on your ampmés viu.
- Connexió del subwoofer: Connecteu el subwoofer al amplifier's speaker output terminals. Ensure correct polarity (+ to + and - to -) to prevent phase issues. The JBL Stage810 has an impedance of 4 Ohms.
Consulteu el vostre amplifier's instruction manual for specific wiring diagrams and recommendations.
Imatge 3.2: posterior view de la JBL Stage810 subwoofer, displaying model information and basic specifications.
4. Funcionament del subwoofer
Once installed, the subwoofer operates in conjunction with your car audio system and amplifier. Adjustments for bass output and crossover frequencies are typically made on the amplificador o unitat principal.
4.1 Initial Sound Adjustment
- Comença amb el amplifier's gain control at its minimum setting.
- Play a familiar piece of music with strong bass content.
- Augmenta lentament el amplifier's gain until the desired bass level is achieved without distortion.
- Adjust the low-pass filter (LPF) on your amplifier or head unit to blend the subwoofer's output seamlessly with your main speakers. A common starting point is around 80-100 Hz.
- Adjust phase settings if available, to ensure the subwoofer's output is in phase with the main speakers.
5. Manteniment
El JBL Stage810 subwoofer requires minimal maintenance to ensure long-term performance.
- Neteja: Use a soft, dry cloth to wipe the subwoofer cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Inspecció: Periodically check the wiring connections for tightness and ensure there are no signs of corrosion or damage. Inspect the subwoofer surround for any tears or cracks.
- Medi ambient: Ensure the subwoofer is not exposed to excessive moisture or extreme temperatures, which can degrade performance and lifespan.
6. Solució De Problemes
Si teniu problemes amb el vostre JBL Stage810 subwoofer, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so del subwoofer |
|
|
| So distorsionat |
|
|
| Weak or Muffled Bass |
|
|
If problems persist after following these steps, consult a professional car audio technician.
7. Especificacions
| Característica | Especificació |
|---|---|
| Nom del model | STAGE 810 |
| Tipus d'altaveu | Subwoofer |
| Diàmetre del subwoofer | 8 polzades |
| Manipulació de potència màxima | 800 watts |
| Gestió de potència RMS | 200 watts |
| Resposta de freqüència | 38 - 200 Hz |
| Impedància | 4 ohms |
| Profunditat de muntatge | 6-15/16" (175 mm) |
| Dimensions del producte (P x A x A) | 10.63" x 10.63" x 5.51" |
| Pes de l'article | 2 lliures |
| Tecnologia de connectivitat | Amb cable |
| Color | Negre |
8. Garantia i Suport
JBL products are designed for reliability and performance. This product comes with a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official JBL weblloc.
For technical support, service, or further inquiries, please visit the official JBL support page:
