1. Introducció
The Memphis Audio SE1040 10-inch Street Edge Single 4-Ohm Subwoofer is designed to deliver impressive bass performance for your vehicle's audio system. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your subwoofer.
Característiques principals:
- Polypropylene SE branded cone for durability and sound quality.
- Rubber surround for enhanced excursion and longevity.
- 1.5-inch copper voice coil for efficient power handling.
- 27oz magnet for robust motor structure.
- DVVC Direct Vent Voice Coil Cooling for thermal management.
2. Informació de seguretat
Please read all safety instructions before installing or operating your subwoofer. Failure to do so may result in injury or damage to the product or vehicle.
- Desconnecteu sempre el terminal negatiu de la bateria del vehicle abans de començar qualsevol treball elèctric.
- Assegureu-vos que tot el cablejat estigui correctament aïllat i fixat per evitar curtcircuits i danys.
- Avoid mounting the subwoofer in locations where it may obstruct driver visibility or interfere with vehicle safety systems.
- No exposeu el subwoofer a una humitat excessiva ni a temperatures extremes.
- Use appropriate hearing protection when testing or operating the audio system at high volumes.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Memphis Audio SE1040 10" Subwoofer (Model: SE1040-UVG)
4. Configuració i instal·lació
Proper installation is crucial for the performance and longevity of your subwoofer. If you are unsure about any part of the installation process, consult a professional car audio installer.
4.1 Consideracions de muntatge
The SE1040 subwoofer is designed for installation in a suitable enclosure (not included). The enclosure type (sealed, ported, bandpass) will significantly impact the subwoofer's performance characteristics. Refer to recommended enclosure specifications from Memphis Audio for optimal results.
- Ensure the mounting surface is rigid and free from vibrations.
- Allow adequate clearance around the subwoofer for proper air circulation and excursion.
- Secure the subwoofer firmly to the enclosure using appropriate screws and gaskets to prevent air leaks.
Figura 1: Angle view of the Memphis Audio SE1040 10-inch subwoofer, showcasing el con i els seus voltants.
Figura 2: De dalt a baix view of the Memphis Audio SE1040 10-inch subwoofer, highlighting the 'SE Street Edge' branding on the cone.
4.2 Connexions de cablejat
The SE1040 is a single 4-Ohm subwoofer. Connect the subwoofer to a compatible amplifier that can safely operate at a 4-Ohm load. Ensure correct polarity (+ to + and - to -) to avoid phase issues and ensure optimal sound reproduction.
- Use high-quality speaker wire of appropriate gauge for the power level and distance.
- Strip wire ends carefully and ensure no stray strands can cause short circuits.
- Securely connect wires to the subwoofer's push terminals.
Figura 3: lateral view of the Memphis Audio SE1040 10-inch subwoofer, showing the rear magnet structure and speaker wire terminals.
5. Funcionament
Once installed, the subwoofer operates as part of your vehicle's overall audio system. Proper amplifier settings and head unit adjustments are essential for optimal performance.
5.1 AmpCoincidència de lifier
Assegureu-vos el vostre amplifier's RMS power output matches the subwoofer's RMS power handling (200 watts). Overpowering or underpowering can lead to damage or poor performance.
5.2 Initial Sound Adjustment
- Comença amb el amplifier's gain control at its minimum setting.
- Play a familiar piece of music with strong bass content.
- Augmenta lentament el amplifier's gain until the subwoofer blends seamlessly with the rest of your audio system without distortion.
- Adjust the low-pass filter (LPF) on your amplifier or head unit to prevent the subwoofer from playing frequencies it is not designed for, typically between 80Hz and 120Hz.
6. Manteniment
The Memphis Audio SE1040 subwoofer requires minimal maintenance to ensure long-term performance.
- Periodically inspect the subwoofer cone and surround for any signs of damage or wear.
- Keep the subwoofer free from dust and debris. Use a soft, dry cloth for cleaning.
- Assegureu-vos que totes les connexions de cablejat romanguin segures.
7. Solució De Problemes
Si teniu problemes amb el subwoofer, consulteu els problemes i solucions més comuns següents:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so del subwoofer | Sense poder amplificador; cablejat solt; amplifier in protect mode; incorrect head unit settings. | Comproveu amplifier power and ground connections. Verify remote turn-on wire. Inspect all speaker wires. Check amplifier fuses. Adjust head unit settings (subwoofer output, volume). |
| Baixos distorsionats o poc clars | Amplifier gain set too high; incorrect LPF setting; damaged subwoofer; poor enclosure. | Reduir amplifier gain. Adjust LPF. Inspect subwoofer cone and surround for damage. Ensure enclosure is sealed and properly constructed. |
| El subwoofer s'atura de manera intermitent | Loose wiring; amplifier overheating; impedance mismatch. | Check all wiring connections. Ensure amplifier has adequate ventilation. Verify amplifier is stable at the subwoofer's 4-Ohm impedance. |
8. Especificacions
Detailed technical specifications for the Memphis Audio SE1040 10" Street Edge Single 4-Ohm Subwoofer:
| Especificació | Valor |
|---|---|
| Nom del model | SE1040 |
| Tipus d'altaveu | Subwoofer |
| Usos recomanats per al producte | Vehicle |
| Diàmetre del subwoofer | 10 polzades |
| Recompte d'unitats | 1.0 recompte |
| Components inclosos | SE1040-UVG |
| Dimensions del producte | 6.3 "P x 11.61" W x 5.3" H |
| Pes de l'article | 7.7 lliures |
| Impedància | 4 ohms |
| Nombre d'articles | 1 |
| Mida de l'altaveu | 10 polzades |
| Font d'alimentació | Cable elèctric (per a amplifier connection) |
| Diàmetre del woofer | 10 polzades |
| Tipus de servei del vehicle | SUVs, Select Cars, Truck |
| Mida del controlador d'àudio | 10 polzades |
| UPC | 702588210085 |
| Fabricant | Àudio de Memphis |
| Potència de sortida màxima dels altaveus | 200 watts RMS / 400 watts pic |
| Tecnologia de connectivitat | Auxiliary, RCA (via ampmés viu) |
| Tipus de muntatge | Muntatge d'escorredor |
9. Informació de la garantia
Memphis Audio products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims. For detailed warranty information, please contact Memphis Audio customer support or refer to the warranty card included with your product, if applicable.
10. Atenció al client
For further assistance, technical support, or inquiries regarding your Memphis Audio SE1040 subwoofer, please contact Memphis Audio directly.
- Fabricant: Àudio de Memphis
- Botiga online: Visit the Memphis Audio Store on Amazon
