Utilitech Pro LED Wraparound Light
Model: MXL2058-LED24K8040
Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Utilitech Pro LED Wraparound Light. Please read this manual thoroughly before installation and retain it for future reference.
The Utilitech Pro LED Wraparound Light is a 24.17-inch LED fixture designed to provide bright, even illumination. It features a domed white acrylic diffuser and operates at 1600 lumens, 24 watts, with a 4000K color temperature at 120 volts.
Informació de seguretat
Always follow basic safety precautions when installing or using this product to reduce the risk of fire, electric shock, or injury to persons.
- Desconnecteu l'alimentació a l'interruptor automàtic abans de la instal·lació o el manteniment.
- Ensure all electrical connections comply with local codes, ordinances, and the National Electric Code (NEC).
- No instal·leu a prop de cap font de calor com ara radiadors, registres de calor, estufes o altres aparells que produeixin calor.
- Do not use this fixture with a dimmer switch unless specifically rated for LED dimming.
- Aquest producte només està pensat per a ús interior.
- No mireu directament a la font de llum LED.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Utilitech Pro LED Wraparound Light Fixture
- Maquinari de muntatge (cargols, ancoratges)
- Manual d'instruccions (aquest document)
Image: The Utilitech Pro LED Wraparound Light, a long, rectangular white fixture with a domed acrylic diffuser and a pull chain switch on one end. This image shows the complete light fixture as it appears out of the box.
Configuració i instal·lació
Follow these steps for proper installation. If you are unsure about any part of the installation, consult a qualified electrician.
- Preparació: Turn off power at the circuit breaker or fuse box to the location where the fixture will be installed. Ensure the power is off before proceeding.
- Lloc de muntatge: Select a suitable mounting location on a ceiling or wall. Ensure the surface can support the weight of the fixture.
- Marcatge: Use the fixture as a template to mark the desired mounting points on the surface.
- Perforació: Drill pilot holes at the marked locations. If mounting into drywall, insert appropriate wall anchors.
- Cablejat: Connect the fixture's wires to the building's electrical wires according to local electrical codes. Typically, connect the black wire from the fixture to the black (hot) wire from the supply, the white wire from the fixture to the white (neutral) wire from the supply, and the green or bare copper wire from the fixture to the green or bare copper (ground) wire from the supply. Secure connections with wire nuts.
- Fixació de fixació: Carefully align the fixture with the drilled holes and secure it using the provided mounting screws. Ensure the fixture is firmly attached to the surface.
- Restaura l'alimentació: Once the fixture is securely mounted and wired, restore power at the circuit breaker.
Instruccions de funcionament
The Utilitech Pro LED Wraparound Light is designed for simple operation.
- Encès/apagat: This fixture is equipped with a pull chain switch for manual operation. Pull the chain once to turn the light on, and pull it again to turn the light off.
- Comandament a distància (si escau): If connected to a wall switch, the light can be controlled by the wall switch. Ensure the pull chain is in the "on" position if using a wall switch for primary control.
Manteniment
The Utilitech Pro LED Wraparound Light requires minimal maintenance.
- Neteja: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Wipe the fixture and diffuser with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic diffuser.
- Longevitat del LED: La font de llum LED integrada està dissenyada per a una llarga vida útil i no requereix substitució de la bombeta.
Resolució de problemes
If you experience issues with your LED Wraparound Light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha energia a l’aparell. Pull chain in "off" position. Connexió de cablejat solta. |
Comproveu l'interruptor. Pull chain to "on" position. Desconnecteu l'alimentació i comproveu les connexions del cablejat. |
| La llum parpelleja. | Connexió de cablejat solta. Interruptor regulador d'intensitat incompatible. |
Desconnecteu l'alimentació i comproveu les connexions del cablejat. Ensure dimmer is rated for LED lights or remove dimmer. |
| La llum és tènue. | Not applicable for this non-dimmable fixture. | Ensure fixture is receiving full 120V power. |
Especificacions
| Atribut | Valor |
|---|---|
| Marca | Utilitech |
| Número de model | MXL2058-LED24K8040 |
| Tipus de llum | LED |
| Wattage | 24 watts |
| Voltage | 120 Volts |
| Brillantor | 1600 lúmens |
| Temperatura de color | 4000 Kelvin (blanc fred) |
| Material | Acrylic (Diffuser) |
| Dimensions del producte | 24.17 polzades (longitud) x 5.75 polzades (amplada) x 2.56 polzades (alçada) |
| Mètode de control | Pull Chain (Integrated) |
| Tipus d'instal·lació | Muntatge al sostre |
Informació de la garantia
Utilitech products are manufactured to high-quality standards. For specific warranty details regarding your Utilitech Pro LED Wraparound Light, please refer to the warranty card included with your product packaging or visit the official Utilitech weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
Atenció al client
If you have any questions, require technical assistance, or need to report a problem with your Utilitech Pro LED Wraparound Light, please contact Utilitech customer support. Contact information can typically be found on the product packaging or the official Utilitech weblloc.
Per obtenir la informació d'assistència més actualitzada, visiteu: www.utilitech.com
