Nora Lighting Josh LED Puck Light User Manual

Introducció

Thank you for choosing the Nora Lighting Josh LED Puck Light. This manual provides essential information for the safe installation, operation, and maintenance of your LED puck light. Please read these instructions thoroughly before installation and and keep them for future reference.

The Josh LED Puck Light is a versatile, low-profile lighting solution designed for accent, under-cabinet, in-cabinet, niche, and jewelry case applications. Its slim design allows for flexible placement and provides even illumination. This LED fixture is designed for either recessed or surface mounting.

Informació important de seguretat

• ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
• Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
• Use only with a 12V DC dimmable power supply (sold separately). Ensure the power supply is compatible with LED lighting.
• Do not modify the fixture or its components. Any modifications may void the warranty and create safety hazards.
• Avoid looking directly into the LED light source when illuminated.
• Ensure proper ventilation around the fixture and power supply.
• Mantenir allunyat de materials inflamables.
• This fixture is suitable for dry locations only.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Nora Lighting Josh LED Puck Light (Model NMP-LED30BZ)
• Mounting hardware (screws, clips, etc. - specific hardware may vary)
• Manual d'instruccions (aquest document)

Note: A 12V DC dimmable power supply is required and sold separately.

Instruccions d'instal·lació

The Josh LED Puck Light can be installed as either a recessed or surface-mounted fixture.

Muntatge encastat

1. Prepara l'obertura: Cut a circular hole in the desired mounting surface. Refer to the specifications section for the exact cutout diameter. Ensure there is sufficient clearance behind the mounting surface for the fixture.
2. Cablejat: Route the 12V DC wiring from your power supply to the installation location. Connect the fixture's wires to the 12V DC power supply output, ensuring correct polarity (positive to positive, negative to negative).
3. Insereix el dispositiu: Gently push the puck light into the prepared opening. The spring clips (if present) will secure the fixture in place.

Muntatge en superfície

1. Marqueu els punts de muntatge: Position the puck light in the desired location. Mark the screw hole positions on the mounting surface.
2. Secure Mounting Plate/Clips: If a separate mounting plate or clips are provided, secure them to the surface using the supplied screws.
3. Cablejat: Route the 12V DC wiring from your power supply. Connect the fixture's wires to the 12V DC power supply output, ensuring correct polarity.
4. Adjunta l'aparell: Secure the puck light to the mounting plate or clips. Ensure the fixture is firmly attached.

Image: The Nora Lighting Josh LED Puck Light in a bronze finish, shown from an angled top-down view. The light features a circular design with a central frosted diffuser and a textured bronze outer ring, suitable for both recessed and surface mounting.

After installation, connect the 12V DC power supply to a suitable power source. Test the light fixture.

Instruccions de funcionament

The Nora Lighting Josh LED Puck Light operates on a 12V DC power supply. Once properly installed and connected to a compatible power source, the light can be controlled via the switch or dimmer connected to your 12V DC power supply.

• Activació/desactivació: Use the wall switch or inline switch connected to your 12V DC power supply to turn the light on or off.
• Dimecres: If using a dimmable 12V DC power supply and a compatible dimmer switch, you can adjust the brightness of the puck light. Ensure the dimmer is rated for LED loads.

The LED technology provides instant illumination without flicker, delay, or warm-up time.

Manteniment

The Nora Lighting Josh LED Puck Light requires minimal maintenance.

• Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau, sec o lleugerament sec.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or optical components.
• Longevitat del LED: La font de llum LED integrada està dissenyada per a una llarga vida útil i no requereix substitució.
• Inspecció: Periodically inspect the wiring and connections for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified electrician.

Resolució de problemes

If troubleshooting steps do not resolve the issue, contact Nora Lighting customer support or a qualified electrician.

Especificacions

Note: Dimensions for cutout and fixture size are not provided in the source data. Please refer to product packaging or Nora Lighting's official weblloc per a mesures precises.

Garantia i Suport

For warranty information, technical support, or to inquire about replacement parts, please contact Nora Lighting directly through their official weblloc o canals d'atenció al client.

Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.