1. Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your Zalman T6 ATX Mid Tower Computer PC Case. Please read this manual thoroughly before beginning installation to ensure proper assembly and optimal performance.
Característiques clau
- Optimized Cooling Performance: Hairline pattern front and side mesh design along with a 120mm rear fan provides optimal air circulation. Total of 4 fans can be installed, including on the side panel.
- Powder Coated Steel: The T6’s chassis is made of high strength steel sheets to withstand high pressure and heat. The black powder coating applied throughout the chassis is corrosion resistant.
- Versatile Layout: T6’s internal layout design provides great workspace for building various types of PC whether for a home workstation, office, or gaming. Will fit ATX, mATX, and mini-ITX motherboards.
- Bays and Ports: (2) 2.5” and (2) 3.5/2.5" drives, external bay for a 5.25" drive, I/O port with 1x USB 3.0, 2x USB 2.0, 1x Audio In, 1x Audio Out.
2. Què hi ha a la caixa
- Zalman T6 ATX Mid Tower Computer PC Case (1 piece)
- Accessory kit (screws, standoffs, cable ties)
- Pre-installed 120mm rear fan
3. Configuració i instal·lació
3.1. Producte acabatview
Mireu aquest vídeo per a una ullada ràpidaview of the Zalman T6 PC case.
Vídeo: Producte acabatview of the Zalman T6 ATX Mid Tower Computer PC Case.
3.2. Internal Layout and Component Compatibility
The Zalman T6 case offers a versatile internal layout to accommodate various PC components. Refer to the diagrams below for component placement and maximum dimensions.
Image: Internal dimensions of the Zalman T6 PC case, showing overall measurements (377mm length, 200mm width, 430mm height) and internal component clearances.
Image: Detailed internal layout of the Zalman T6, indicating maximum CPU cooler height (165mm) and VGA card length (280mm), along with drive bay locations.
Image: Diagram showing the placement of the power supply unit (Max 160mm) and compatible motherboard form factors (ATX, mATX, Mini-ITX) within the Zalman T6 case.
3.3. Instal·lació de la unitat
The T6 case supports multiple storage drives. Install your 2.5" SSDs, 3.5" HDDs, and 5.25" optical drives into their designated bays.
Imatge: View of the drive bays in the Zalman T6 case, showing mounts for two 2.5" drives, two 3.5/2.5" drives, and one external 5.25" optical drive bay.
3.4. Fan Installation and Airflow
The case comes with one pre-installed 120mm rear fan. Additional fans can be installed for enhanced cooling.
Image: Illustration of the optional 120mm side cooling fan mount on the side panel of the Zalman T6 case.
Image: Diagram showing fan placement options: one pre-installed 120mm rear fan, two optional 120mm front fans, and one optional 120mm side fan. Note: CPU cooler height is limited to 140mm if a side fan is installed.
4. Funcionament de la carcassa de l'ordinador
4.1. Panell d'E/S frontal
The front I/O panel provides convenient access to essential controls and ports.
Image: Labeled diagram of the Zalman T6 front I/O panel, showing the Power button, Headphone jack, Microphone jack, USB 2.0 ports (x2), USB 3.0 port (x1), HDD & Power LED, and Reset button.
4.2. Engegada i reinici
- Botó d'encesa: Press to turn the computer on or off.
- Botó de restabliment: Press to restart the computer. Use only when necessary.
4.3. Control de velocitat del ventilador
The fan speed control switch allows adjustment of connected fans for optimal balance between cooling and noise levels.
5. Manteniment
5.1. Neteja dels filtres de pols
Regular cleaning of dust filters is crucial for maintaining optimal airflow and preventing dust buildup inside the case. Dust filters are typically located on the front, top, and bottom of the case. Gently remove and clean them with compressed air or water, ensuring they are completely dry before reinstallation.
6. Solució De Problemes
6.1. Problemes comuns
- Compatibilitat de la placa base: Caution: This case will not fit ATX motherboards with side-facing SATA ports. Ensure your motherboard's SATA port orientation is compatible before installation.
- Sobreescalfament: Ensure all fans are properly installed and functioning. Check for dust buildup on filters and components. Verify correct airflow direction.
- Sense energia: Double-check all power connections from the power supply to the motherboard and components. Ensure the power supply switch is in the 'ON' position.
7. Especificacions tècniques
| Característica | Especificació |
|---|---|
| Marca | Zalman |
| Nom del model | T6 |
| Número de model de l'article | T6 |
| Pes de l'article | 8 lliures |
| Dimensions del producte (LxWxH) | 7.87 x 16.93 x 14.84 polzades |
| Color | Negre |
| Suport de la placa base | ATX, mATX, Mini-ITX |
| Drive Bays | (2) 2.5” and (2) 3.5/2.5" drives, (1) 5.25" external bay |
| Ventiladors preinstal·lats | 1x Ventilador posterior de 120 mm |
| Suport dels fans | Up to 4 fans (1x Rear, 2x Front, 1x Side) |
| Alçada màxima del refrigerador de la CPU | 165mm (140mm with side fan) |
| Longitud màxima de la targeta VGA | 280 mm |
| Ports d'E/S | 1x USB 3.0, 2x USB 2.0, 1x Audio In, 1x Audio Out |
| Característiques especials | Built-In Fan, Dust Filter, USB 3.0 |
8. Garantia i Suport
For warranty information and technical support, please refer to the official Zalman weblloc web o poseu-vos en contacte amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
Official Zalman Weblloc: www.zalman.com
