SENCOR SWS 3000 W Weather Station

1. Introducció

Gràcies per la compraasing the SENCOR SWS 3000 W Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, along with time and date display. Please read this manual carefully before operating the device to ensure proper use and to maximize its lifespan.

2. Informació de seguretat

• Do not expose the main unit or sensor to extreme temperatures, direct sunlight, or moisture.
• Eviteu deixar caure el dispositiu o sotmetre-lo a forts impactes.
• No intenteu desmuntar ni reparar la unitat vosaltres mateixos. Encarregueu tot el manteniment a personal qualificat.
• Eliminar les bateries usades de manera responsable d'acord amb la normativa local.
• Mantingueu el dispositiu fora de l'abast dels nens.

3. Contingut del paquet

Si us plau, comproveu el contingut del paquet per assegurar-vos que hi hagi tots els elements:

• SENCOR SWS 3000 W Main Unit (Weather Station)
• Sensor exterior sense fils
• Manual d'usuari (aquest document)

4. Producte acabatview

Figure 4.1: The SENCOR SWS 3000 W Weather Station main unit (left) and its accompanying wireless outdoor sensor (right).

Figura 4.2: Angle view of the SENCOR SWS 3000 W main unit, showcasinla seva pantalla i els botons de control.

The SENCOR SWS 3000 W Weather Station consists of a main display unit and a wireless outdoor sensor. The main unit features a clear LCD display with white backlight, showing indoor and outdoor temperature, humidity, time, and date. The wireless sensor transmits outdoor data to the main unit.

Figura 4.3: Primer pla view of the wireless outdoor sensor, which transmits temperature and humidity data to the main unit.

Figura 4.4: posterior view of the main unit, showing the battery compartment and the integrated stand for tabletop placement.

5. Configuració

5.1 Instal·lació de la bateria

The SENCOR SWS 3000 W Weather Station is battery-powered. Ensure you have the correct battery types as specified in the specifications section.

1. Unitat principal: Open the battery compartment cover on the back of the main unit (refer to Figure 4.4). Insert the required AAA batteries, observing the correct polarity (+/-). Close the cover securely.
2. Sensor sense fils: Open the battery compartment cover on the back of the wireless sensor (refer to Figure 4.3). Insert the required batteries (typically AAA), observing the correct polarity (+/-). Close the cover securely.

5.2 Col·locació del sensor

Proper placement of the wireless sensor is crucial for accurate outdoor readings.

• Place the sensor in a shaded area to avoid direct sunlight, which can cause inaccurate temperature readings.
• Assegureu-vos que el sensor estigui protegit de la pluja o la neu directes.
• Position the sensor within the effective transmission range (up to 30 meters in open air) of the main unit. Walls and other obstacles can reduce this range.
• Avoid placing the sensor near large metal objects or electrical appliances that may interfere with the wireless signal.

Figura 5.1: Example placement of the main unit indoors and the wireless sensor outdoors for optimal performance.

Figure 5.2: The main unit can be placed on a flat surface, while the sensor is mounted on a wall or suitable outdoor location.

5.3 Engegada inicial i emparellament

After installing batteries in both units, the main unit will automatically search for the wireless sensor. This process may take a few minutes.

• Place the main unit and the sensor close to each other during the initial pairing process.
• Once connected, the outdoor temperature and humidity will appear on the main unit's display.
• If the connection is not established, remove and reinsert the batteries from both units, then try again.

6. Instruccions de funcionament

6.1 Mostra informació

The LCD display provides various information at a glance:

• Temperatura i humitat exteriors: Displayed prominently at the top.
• Temperatura i humitat interiors: Displayed below the outdoor readings.
• Hora i data: Situat a la part inferior de la pantalla.
• Icona de previsió meteorològica: An icon indicating predicted weather conditions (e.g., sunny, cloudy, rainy).
• Indicador de canal: Shows which sensor channel is currently displayed (if multiple sensors are used).
• Indicador de bateria: Alerts when batteries are low for either unit.

Figura 6.1: Detallada view of the SENCOR SWS 3000 W display, highlighting various information segments.

6.2 Configuració de l'hora i la data

To set the time and date on your weather station:

1. Press and hold the "AL/SET" button (usually located below the display) for a few seconds until the time digits start flashing.
2. Use the "CH" or "MEM" buttons to adjust the flashing value (e.g., hour, minute).
3. Press "AL/SET" again to confirm the setting and move to the next adjustable item (e.g., minute, year, month, day).
4. Repeat until all settings are configured. Press "AL/SET" one last time to exit the setting mode.

6.3 Selecció de la unitat de temperatura (°C/°F)

Per canviar entre Celsius (°C) i Fahrenheit (°F):

• Locate the °C/°F button, usually on the back or side of the main unit, or sometimes integrated with another button (e.g., "MEM" or "CH" with a short press).
• Press this button to toggle between the two temperature units. The display will update accordingly.

6.4 Selecció de canals (per a diversos sensors)

If you have multiple wireless sensors (up to 3 supported by SWS 3000 W), you can switch between their readings:

• Press the "CH" button (Channel) on the main unit.
• Each press will cycle through the available channels (CH1, CH2, CH3) or an auto-cycle mode.
• Ensure each sensor is set to a different channel using its internal switch (if available).

6.5 Memory Function (Min/Max Readings)

The weather station records the minimum and maximum temperature and humidity readings over a period.

• Press the "MEM" button (Memory) to view the maximum recorded values.
• Press "MEM" again to view the minimum recorded values.
• Press "MEM" a third time to return to current readings.
• To clear the recorded Min/Max values, press and hold the "MEM" button while viewing.

7. Manteniment

• Neteja: Netegeu la unitat principal i el sensor amb un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Substitució de la bateria: Replace batteries when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
• Emmagatzematge: Si guardeu el dispositiu durant un període prolongat, traieu totes les piles per evitar fuites. Guardeu-lo en un lloc fresc i sec.

8. Solució De Problemes

9. Especificacions

Note: Specifications are subject to change without notice. Battery quantities are typical and should be confirmed with product packaging.

10. Garantia i Suport

SENCOR products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official SENCOR weblloc web. Per a consultes sobre assistència tècnica o servei, poseu-vos en contacte amb el servei d'atenció al client de SENCOR a través dels seus canals oficials.

Conserveu el tiquet de compra com a comprovant de compra a efectes de garantia.