1. Producte acabatview
The Skar Audio NPX10-8 is a 10-inch neodymium pro audio mid-range loudspeaker designed for sound clarity, loudness, and reliability. Its shallow and versatile design allows for installation in various applications. This speaker features a high-performance neodymium motor, a lightweight and powerful magnet, and a 2-inch voice coil complemented by an advanced airflow cooling design.
Característiques principals:
- Skar Audio NPX Neodymium Series 10" 8-Ohm Mid-Range Speaker
- 400 Watts Max Power | 200 Watts RMS Power
- Ultra Light-Weight and Powerful Neodymium Magnet
- 2" Copper Voice Coil | Sensitivity: 93.9 dB
- Frequency Response: 50 Hz - 5,000 Hz
- Mounting Depth: 2.67" | Cut-Out Diameter: 9.13"
Figura 1: Angle frontal view of the Skar Audio NPX10-8 loudspeaker.
2. Configuració i instal·lació
2.1 Desembalatge
Carefully remove the loudspeaker from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Retain all packaging materials for future use or in case of a return.
2.2 Consideracions de muntatge
Proper mounting is crucial for optimal performance and speaker longevity. Ensure the mounting surface is solid and free from obstructions. The speaker requires a cut-out diameter of 9.13 inches and a mounting depth of 2.67 inches. Verify these dimensions against your intended installation location before proceeding.
Figura 2: Pro lateralfile illustrating the shallow mounting depth of the NPX10-8 loudspeaker.
2.3 Cablejat
The NPX10-8 features a single 8-ohm voice coil configuration and is designed for wired connectivity. Connect the speaker to an amplifier capable of delivering 200 Watts RMS power per channel at an 8-ohm load. Ensure all connections are secure and properly insulated to prevent short circuits and ensure consistent audio signal transfer.
Figura 3: posterior view of the NPX10-8 loudspeaker, highlighting the wiring terminals.
3. Instruccions de funcionament
3.1 Encès
Once properly installed and wired, power on your audio system. Start with the amplifier gain set to its lowest level and gradually increase it to prevent sudden loud sounds that could damage the speakers.
3.2 Configuració d'àudio
The NPX10-8 has a frequency response of 50 Hz to 5,000 Hz and a sensitivity of 93.9 dB. For optimal performance and to prevent distortion, it is recommended to use a high-pass filter (HPF) on your amplifier or head unit. Setting the HPF around 80-100 Hz can help protect the mid-range speaker from low-frequency content it is not designed to reproduce, allowing it to focus on its intended frequency range.
Avoid operating the speakers at excessively high volumes for prolonged periods, especially if distortion is audible. Distortion indicates that the speakers or amplifier are being overdriven, which can lead to permanent damage.
Video 1: A demonstration of the Skar Audio NPX10-8 loudspeaker's sound output.
4. Manteniment
To ensure the longevity and optimal performance of your Skar Audio NPX10-8 loudspeakers, follow these maintenance guidelines:
- Neteja: Use a soft, dry cloth to gently wipe down the speaker cone and surround. Avoid using harsh chemicals or abrasive cleaners, as these can damage the speaker materials.
- Inspecció: Periodically check the speaker for any signs of wear, such as tears in the cone or surround, or loose connections. Address any issues promptly to prevent further damage.
- Protecció del medi ambient: While robust, avoid exposing the speakers to extreme temperatures, direct sunlight for extended periods, or excessive moisture.
5. Solució De Problemes
If you encounter issues with your NPX10-8 loudspeaker, refer to the following common troubleshooting steps:
- Sense so:
- Comproveu totes les connexions de cablejat des del amplifier to the speaker. Ensure they are secure and correctly polarized (+ to + and - to -).
- Comproveu que el ampel lifier està encès i funciona correctament.
- Confirm that the audio source is playing and the volume is turned up.
- So distorsionat:
- Reduce the volume level on your head unit and amplifier. Overdriving the speakers or ampEl lifer pot causar distorsió.
- Comproveu el amplifier gain settings. If set too high, it can introduce distortion.
- Ensure the high-pass filter (HPF) is correctly set to prevent low frequencies from reaching the mid-range speaker.
- Inspeccioneu el con de l'altaveu i el so envoltant per detectar qualsevol dany físic.
- So intermitent:
- Check for loose wiring connections at both the speaker and ampterminals de lifier.
- Inspect speaker wires for any cuts or frayed insulation that could cause intermittent contact.
If these steps do not resolve the issue, consult a professional audio installer or contact Skar Audio customer support.
6. Especificacions
| Característica | Especificació |
|---|---|
| Nom del model | NPX10-8 |
| Tipus d'altaveu | Gamma mitjana |
| Mida de l'altaveu | 10 polzades |
| Impedància | 8 ohms |
| Potència màxima | 400 watts |
| Potència RMS | 200 watts |
| Resposta de freqüència | 50 Hz - 5,000 Hz |
| Sensibilitat | 93.9 dB |
| Profunditat de muntatge | 2.67 polzades |
| Diàmetre de tall | 9.13 polzades |
| Tipus d'imant | Neodimi |
| Bobina de veu | 2" Copper |
| Tecnologia de connectivitat | Amb cable |
| Pes de l'article | 4.2 lliures |
| Dimensions del producte | 10 x 10 x 3 polzades |
7. Garantia i Suport
The Skar Audio NPX10-8 loudspeaker comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty information provided with your product packaging or visit the official Skar Audio weblloc.
For technical assistance, troubleshooting beyond the scope of this manual, or to inquire about warranty claims, please contact Skar Audio customer support directly. Contact information can typically be found on the manufacturer's webdocumentació del lloc o del producte.
