Suntek HC-550A 16MP Trail Camera User Manual

Introducció

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Suntek HC-550A 16MP Trail Camera. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance. The HC-550A is designed for outdoor surveillance, wildlife monitoring, and security applications, featuring a 16-megapixel camera, infrared night vision, and a 120-degree field of view.

Contingut del paquet

En obrir el paquet, comproveu que tots els elements hi siguin presents i que estiguin en bon estat:

• Suntek HC-550A Trail Camera
• Corretja de muntatge
• Cable USB
• Manual d'usuari (aquest document)
• (Optional, depending on retailer) SD Card
• (Optional, depending on retailer) Batteries

Producte acabatview

Figura 1: Davant view of the Suntek HC-550A Trail Camera with the protective cover open. The image displays the internal LCD screen, the main camera lens, an array of infrared LEDs for night vision, and the Passive Infrared (PIR) motion sensor at the bottom. The camouflage casing is visible, along with the side latches for securing the cover.

The Suntek HC-550A features a robust, weather-resistant design suitable for outdoor use. Key components include:

• Main Camera Lens: Captures 16-megapixel photos and high-definition videos.
• Infrared (IR) LEDs: Provide illumination for night vision without startling wildlife.
• Sensor de moviment PIR: Detects movement of warm bodies within its detection range to trigger recording.
• Pantalla LCD: For menu navigation, settings adjustment, and playback of captured media.
• Botons de control: Used to navigate the menu and change settings.
• Compartiment de la bateria: Located inside, holds the required batteries.
• Ranura per a targeta SD: Per a la inserció de targetes de memòria.
• Punts de muntatge: For securing the camera to a tree or post.

Configuració

1. Instal·lació de la bateria

1. Open the camera's protective latches and swing open the front cover.
2. Localitzeu el compartiment de la bateria.
3. Insert 8 AA batteries (not included) according to the polarity markings (+/-) inside the compartment. Ensure all batteries are inserted correctly.
4. Tanqueu bé la tapa del compartiment de la bateria.

2. Instal·lació de la targeta SD

1. With the camera cover open, locate the SD card slot.
2. Insert a Class 10 or higher SD card (up to 32GB recommended, not included) into the slot with the metal contacts facing down. Push until it clicks into place.
3. To remove, push the SD card in again until it clicks, then release, and it will eject slightly.

3. Muntatge de la càmera

1. Select a suitable location, such as a tree or post, that provides a clear view de la zona que voleu controlar.
2. Passeu la corretja de muntatge proporcionada per les ranures de la part posterior de la càmera.
3. Securely fasten the strap around the chosen object. Adjust the camera's angle as needed.
4. Ensure the camera is stable and not prone to movement from wind or other environmental factors.

Instruccions de funcionament

1. Encendre/apagar

• To power on, slide the power switch (usually located inside the camera, near the screen) from OFF to the TEST or ON position.
• In TEST mode, you can access the menu and view viu footage.
• In ON mode, the camera will enter surveillance mode after a short countdown, indicated by a flashing LED.
• To power off, slide the switch to the OFF position.

2. Selecció de mode

The camera typically offers three modes:

• DESACTIVAT: Camera is powered down.
• PROVA: Allows access to the menu, settings, and manual photo/video capture. The screen is active.
• ACTIVITAT: Surveillance mode. The camera will automatically capture photos or videos when motion is detected, according to your settings. The screen will turn off after a few seconds.

3. Navegació i configuració del menú

In TEST mode, use the control buttons (e.g., MENU, UP, DOWN, LEFT, RIGHT, OK) to navigate the on-screen menu. Common settings include:

• Mode: Seleccioneu Foto, Vídeo o Foto+Vídeo.
• Mida de la foto: Set resolution (e.g., 16MP, 12MP, 8MP).
• Resolució de vídeo: Set resolution (e.g., 1080P, 720P).
• Sensibilitat PIR: Adjust motion sensor sensitivity (High, Medium, Low).
• Interval de desencadenament: Estableix el retard entre deteccions.
• Laps de temps: Enable time-lapse photography.
• Data/Hora: Estableix la data i l'hora actuals.
• Format de la targeta SD: Esborra totes les dades de la targeta SD.

4. Captura de fotos i vídeos

Once the camera is in ON mode, it will automatically monitor the area. When the PIR sensor detects motion, the camera will activate and capture images or video clips based on your configured settings. The infrared LEDs will automatically engage in low-light conditions for night vision.

Manteniment

1. Neteja

• Regularly clean the camera lens and PIR sensor window with a soft, lint-free cloth to ensure clear images and accurate detection.
• Wipe the camera casing amb anunciamp cloth if it becomes dirty. Avoid using harsh chemicals or abrasive materials.

2. Emmagatzematge

• When not in use for extended periods, remove the batteries to prevent leakage and damage.
• Guardeu la càmera en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.

Resolució de problemes

Especificacions

• Model: Suntek HC-550A
• Sensor d'imatge: CMOS de 16 megapíxels
• Angle de la lent: 120 graus
• IR Vision: Sí
• Tipus de potència: Battery powered (8x AA, 6 Volts)
• Número de referència: SH-10324
• ASIN: B07RK4MW9X
• Quantitat: 1 unitat

Garantia i Suport

Per obtenir informació sobre la garantia i assistència tècnica, consulteu la documentació proporcionada pel vostre distribuïdor o poseu-vos en contacte directament amb el fabricant. Conserveu el rebut de compra com a comprovant de compra.