Waveshare RS485 to Ethernet Converter User Manual

1. Introducció

The Waveshare RS485 to Ethernet Converter (Model: RS485 TO ETH) is a device designed to facilitate communication between RS485 serial devices and an Ethernet network. It enables seamless data exchange, allowing RS485 devices to be integrated into modern IP-based systems. This manual provides essential information for the proper setup, operation, and maintenance of the converter.

Figure 1: Waveshare RS485 to Ethernet Converter with included power adapter. This image displays the Waveshare RS485 to Ethernet Converter unit alongside its power adapter. The converter features a black casing with green labels indicating DC 5V power input, Ethernet port, and RS485 screw terminals (A+, B-, GND). The power adapter is a standard wall plug type.

2. Producte acabatview i Característiques

The Waveshare RS485 to Ethernet Converter is built with a focus on performance and reliability. Key features include:

M0 series 32-bit ARM processor for fast and efficient operation.
10/100M Auto-MDI/MDIX Ethernet interface, compatible with both cross-over and straight-through cables.
Configurable RS485 baud rate from 600bps to 230.4Kbps, supporting None, Odd, Even, Mark, and Space parity options.
Multiple working modes: TCP Server, TCP Client, UDP Server, UDP Client, and HTTPD Client (supports GET and POST).
Flexible configuration options via webpage, AT commands, serial protocol, and network protocol.
Support for customized heartbeat and registration packets for connection verification and device identification.
Personalitzable webpage for module configuration.
RFC2217-like protocol support for devices with changing serial settings.
KeepAlive mechanism for detecting broken connections and automatic re-connection.
Time-out reboot (no-data reboot) for long-term stable connections, with configurable reboot time.
DNS domain name resolution and configurable DNS server.
DHCP support for auto-obtained IP or static IP configuration.
Firmware upgradable via the network.
Hardware and software options for restoring to factory settings.
Customizable MAC address.

3. Configuració

Follow these steps to set up your Waveshare RS485 to Ethernet Converter:

Connexió d'alimentació: Connect a DC 5V power supply to the DC 5V input jack on the converter. The recommended input voltage és 5.0-7.0V.
Connexió Ethernet: Connect an Ethernet cable from the converter's RJ45 port to your network switch or router. The converter supports 10/100M Auto-MDI/MDIX.
Connexió RS485: Connect your RS485 device to the green screw terminal block. Ensure correct polarity for A+ (positive), B- (negative), and GND (ground).
Configuració inicial: The device comes with default network settings. These are typically printed on a label on the bottom of the unit.

Figure 2: Bottom label of Waveshare RS485 to Ethernet Converter showing default network settings. The bottom of the converter unit displays a label with essential network configuration details: Model: RS485 TO ETH, Username: admin, Default IP: 192.168.0.7, Password: admin, MAC address, and Input power requirements (DC5-7V/500mA). The manufacturer's website, www.waveshare.net, is also listed.

For detailed setup instructions and advanced configurations, refer to the official Waveshare product wiki at www.waveshare.net.

4. Modes de funcionament

The converter supports various operating modes to suit different application requirements:

TCP Server: The converter listens for incoming TCP connections from clients.
TCP Client: The converter initiates a TCP connection to a specified server.
UDP Server: The converter listens for incoming UDP packets.
UDP Client: The converter sends UDP packets to a specified destination.
HTTPD Client: The converter can act as an HTTP client, supporting GET and POST requests.

5. Configuració

The Waveshare RS485 to Ethernet Converter offers multiple methods for configuration:

Webpage Configuration: Access the converter's built-in web interface using its IP address (default: 192.168.0.7) in a web browser. Use the default username 'admin' and password 'admin' for login.
Comandes AT: Configure the device using AT commands sent via the serial port.
Protocol de sèrie: Utilize a dedicated serial protocol for configuration.
Protocol de xarxa: Configuration can also be performed over the network using specific protocols.

Actualització del firmware: The device's firmware can be updated over the network, ensuring access to the latest features and improvements.

Restabliment de fàbrica: The converter can be restored to its factory default settings via both software commands and a hardware reset button (Reload button).

6. Programari

Waveshare provides supporting software to assist with the use and configuration of the converter:

Module Configuration Software: A dedicated application for configuring the converter's parameters.
TCP/UDP Testing Tool: Software for testing TCP and UDP communication.
VCOM Virtual Serial Port Software: Allows the Ethernet port to be mapped as a virtual serial port on a computer.

Example code for various platforms (e.g., host computer socket, VB, C++, Delphi, Android, iOS) is also available from the manufacturer.

7. Especificacions

Figure 3: Technical specifications and dimension diagram for Waveshare RS485 to Ethernet Converter. A detailed diagram presenting the technical specifications for Ethernet, RS485, Power, and Environment, along with precise dimensions of the converter unit in millimeters. Key measurements like length, width, and height are indicated.

Waveshare RS485 to Ethernet Converter Specifications
Categoria	Paràmetre	Valor
Ethernet	Connector	RJ45
	Taxa de comunicació	10/100 Mbps
	Protecció de la interfície	1.5KV electromagnetic isolation
	Protocols	IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
	TX/RX Cache	6Kbyte / 4Kbyte
RS485	Connector	Screw terminal (A+, B-, GND)
	Bit de dades	5 bits, 6 bits, 7 bits, 8 bits
	Stop Bit	1, 2
	Comprovació de paritat	Cap, senar, parell, marca, espai
	Velocitat de transmissió	600bps-230.4Kbps
	Protecció de la interfície	2KV ESD protection, RS485 pull up/down resistors: 2.2KΩ
Poder	Font d'alimentació	5.0-7.0V (5V recommended)
	Corrent de funcionament	150 mA (@5 V)
	Consum d'energia	<1W
	Protecció de la interfície	Reverse-proof, ESD protection, anti-surge
Medi ambient	Temperatura de funcionament	-25~75°C
Medi ambient	Temperatura d'emmagatzematge	-40~105°C
Dimensions	Unit (L x W x H)	63.59mm x 41.13mm x 25.47mm (approximate, excluding mounting tabs)

8. Solució De Problemes

If you encounter issues with your Waveshare RS485 to Ethernet Converter, consider the following:

Sense connexió de xarxa: Verify that the Ethernet cable is securely connected and that your network infrastructure (router/switch) is functioning correctly. Check the converter's network indicator lights.
No es pot accedir Web Interfície: Ensure your computer's IP address is in the same subnet as the converter's default IP (192.168.0.7). If the IP has been changed, try to recall the new IP or perform a factory reset.
RS485 Communication Failure: Double-check the RS485 wiring for correct A+ and B- polarity. Ensure the baud rate, data bits, stop bits, and parity settings on the converter match those of your RS485 device.
Problemes d'alimentació: Confirm that the power adapter is correctly connected and providing the specified DC 5V (5.0-7.0V) power.
Protocol Modbus: Please note that this converter does no natively support Modbus protocol. If your application requires Modbus, additional software or gateway solutions may be necessary.
General Instability: If the device experiences intermittent issues, consider performing a factory reset and reconfiguring it. Ensure the operating environment is within specified temperature ranges.

For more in-depth troubleshooting guides and technical support, visit the official Waveshare weblloc.

9. Manteniment

To ensure the longevity and reliable operation of your converter:

Mantingueu el dispositiu net i lliure de pols. Feu servir un drap suau i sec per netejar-lo.
Operate the device within the specified environmental conditions (temperature and humidity).
Eviteu exposar el dispositiu a una humitat excessiva o temperatures extremes.
Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.

10. Garantia i Suport

For information regarding product warranty, technical support, and additional resources, please refer to the official Waveshare weblloc:

www.waveshare.net

El website provides comprehensive documentation, software downloads, and contact information for customer assistance.

	Waveshare RS232/485 to WiFi PoE Ethernet (B) Serial Server User Manual Explore the Waveshare RS232/485 to WiFi PoE Ethernet (B) User Manual, a comprehensive guide for the serial server that converts RS232/485 to TCP/IP network interfaces, enabling bidirectional data transmission via WiFi and Ethernet.
	Manual d'usuari de Waveshare UART a ETH (B): Guia del convertidor de sèrie a Ethernet Manual d'usuari complet per al mòdul Waveshare UART TO ETH (B), que detalla les seves característiques com a convertidor UART a Ethernet, passarel·la IoT, passarel·la Modbus i servidor sèrie per a aplicacions industrials.
	Waveshare RS485 to WiFi/ETH MQTT Communication User Manual Comprehensive user manual for the Waveshare RS485 to WiFi/ETH module, guiding users through software and hardware preparation, network configuration, and establishing MQTT communication with platforms like EMQX.
	Waveshare RS485 TO ETH (B) User Manual - Industrial RS485 to Ethernet IoT Gateway Comprehensive user manual for the Waveshare RS485 TO ETH (B), an industrial serial device server and IoT gateway. Learn about its features, applications, configuration, and how to connect RS485 devices to Ethernet for Modbus, MQTT, and cloud integration.
	Manual d'usuari de Waveshare RS232/485 TO WIFI ETH (B): configuració, característiques i aplicacions Comprehensive user manual for the Waveshare RS232/485 TO WIFI ETH (B) serial server. Learn about its features, hardware and network setup, data transmission, various working modes, and application scenarios for industrial and IoT communication.
	RS232/RS485 to Ethernet & PoE Ethernet Gateway Technical Specification This document provides detailed specifications, hardware and software features, and testing procedures for the Waveshare RS232/RS485 to Ethernet and PoE Ethernet gateways. These devices function as serial servers, Modbus gateways, and MQTT gateways for industrial data acquisition and IoT connectivity.