1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your FABER 2740 SRM 60cm under-cabinet cooker hood. Please read these instructions carefully before using the appliance and retain them for future reference.
2. Informació de seguretat
- Ensure the electrical installation complies with local safety regulations.
- No permeteu que els nens facin funcionar l'aparell.
- Netegeu regularment els filtres de greixos per evitar riscs d'incendi.
- No flamegeu sota la campana.
- Ensure adequate ventilation when the hood is used simultaneously with gas or other fuel-burning appliances.
- Desconnecteu l'aparell de la xarxa elèctrica abans de qualsevol neteja o manteniment.
3. Producte acabatview
The FABER 2740 SRM is a 60cm under-cabinet cooker hood designed for integration into kitchen cabinets. It features 3W LED lighting for illuminating the cooking area and offers three adjustable suction power levels.
Figure 1: FABER 2740 SRM cooker hood installed under a kitchen cabinet, showcasing el seu disseny integrat.
4. Instal·lació
The cooker hood can be installed in two modes: ducted (external extraction) or recirculating (internal filtration).
4.1 Muntatge
Refer to the provided technical diagram for precise measurements and mounting points. The hood is designed for under-cabinet installation.
Figure 2: Technical drawing with dimensions for FABER 2740 SRM cooker hood installation. Ensure cabinet and ducting clearances are met.
4.2 Ducted Mode (External Extraction)
In ducted mode, cooking fumes are expelled outside the home through an exhaust duct (not included). Ensure the ducting is correctly sized and sealed to maximize efficiency.
Figure 3: Diagram showing ducted extraction mode, where air is vented outside.
4.3 Recirculating Mode (Internal Filtration)
If external air evacuation is not possible, the hood can operate in recirculating mode. This requires the installation of activated carbon filters (not included) to purify cooking odors before releasing clean air back into the kitchen environment.
Figure 4: Diagram showing recirculating filtration mode, where air is filtered and returned to the kitchen.
5. Instruccions de funcionament
The FABER 2740 SRM features push-button controls for managing suction speed and lighting.
5.1 Controls
The control panel typically consists of buttons for:
- Encès/apagat: Activates or deactivates the hood.
- Selecció de velocitat: Adjusts the motor speed (Level 1, 2, or 3).
- Llum ON/OFF: Controls the LED lighting.
Configuració de velocitat de 5.2
Select the appropriate speed level based on the intensity of cooking fumes:
- Nivell 1: For light cooking, simmering.
- Nivell 2: For normal cooking, moderate fumes.
- Nivell 3: For heavy cooking, frying, or strong odors.
Il·luminació 5.3
Press the light button to turn the 3W LED lighting on or off, providing illumination for your cooking surface.
6. Manteniment
Regular maintenance ensures optimal performance and longevity of your cooker hood.
6.1 Metal Anti-Grease Filters
The hood includes metal anti-grease filters designed to capture cooking grease. These filters should be cleaned approximately once a month, depending on usage. They are easy to remove and are dishwasher-safe.
Figure 5: Metal anti-grease filters. These should be cleaned regularly.
6.2 Activated Carbon Filters (Optional)
For recirculating mode, activated carbon filters (not included) are required to remove odors. These filters cannot be washed and must be replaced approximately every 3 months, or more frequently with heavy use. Use only original FABER filters to ensure compatibility and performance.
Figure 6: Activated carbon filters. These are essential for odor removal in recirculating mode.
7. Solució De Problemes
If you encounter issues with your cooker hood, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La campana no s'encén | No power supply; Power cord disconnected; Fuse blown. | Check power connection; Check circuit breaker/fuse box. |
| Baixa potència d'aspiració | Grease filters clogged; Activated carbon filters saturated (recirculating mode); Ducting obstructed or too long/narrow. | Clean grease filters; Replace activated carbon filters; Check ducting for obstructions. |
| Soroll excessiu | Loose components; Incorrect installation; Obstruction in fan. | Check for loose screws; Ensure correct installation; Inspect fan for foreign objects. |
| Els llums no funcionen | Bulb faulty; Electrical connection issue. | Replace LED bulb (if replaceable); Check electrical connections. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb personal de servei qualificat.
8. Especificacions
Technical details for the FABER 2740 SRM cooker hood:
- Número de model: 300.0557.576
- Dimensions (L x A x A): 59.8 x 48.6 x 15 cm
- Pes: 8.6 quilos
- Material: Aliatge d'acer
- Tipus de muntatge: Under-cabinet
- Tipus de control: Pulsador
- Tipus de ventilació: Ducted or Recirculating
- Capacitat de flux d'aire: 380 Cubic meters per hour
- Nivell de soroll: 70 decibels (màx.)
- Tipus de font de llum: LED (3 W)
- Classe d'eficiència energètica: D
- Tipus de filtre: Metal Anti-Grease (included), Activated Carbon (compatible, not included)
Figure 7: Energy efficiency label for the FABER 2740 SRM cooker hood.
9. Garantia i Suport
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or spare parts, please contact FABER customer service or visit the official FABER weblloc.
Ensure to have your model number (2740 SRM or 300.0557.576) and purchase date available when contacting support.
