1. Introducció
The Pyle PT12050CH is a 12-channel Bluetooth wireless power amplifier designed for multi-zone audio applications. This unit integrates sound amplification with various input options, including Bluetooth wireless streaming, USB, SD card, AUX, RCA, and microphone inputs. It is suitable for diverse environments such as restaurants, theaters, studios, or stages, providing flexible audio control and distribution.
This manual provides detailed instructions for the proper setup, operation, and maintenance of your PT12050CH amplificador per garantir un rendiment i una longevitat òptims.
2. Instruccions de seguretat
Si us plau, llegiu i comprengui totes les instruccions de seguretat abans de fer servir aquest dispositiu. Conservi aquest manual per a futures consultes.
- Font d'alimentació: Connect the unit only to the type of power source indicated on the marking label. Ensure the voltage selector switch on the rear panel is set correctly for your region (115V/230V).
- Ventilació: No bloquegeu cap obertura de ventilació. Instal·leu-la d'acord amb les instruccions del fabricant. Manteniu un espai suficient al voltant de la unitat per a un flux d'aire adequat.
- Aigua i humitat: No exposeu aquest aparell a la pluja ni a la humitat. No col·loqueu objectes plens de líquids, com ara gerros, sobre l'aparell.
- Calor: No instal·leu a prop de cap font de calor com ara radiadors, registres de calor, estufes o altres aparells (inclosos amplificadors) que produeixen calor.
- Posada a terra: This appliance must be grounded. Do not defeat the safety purpose of the polarized or grounding-type plug.
- Manteniment: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.
- Neteja: Desconnecteu aquest producte de la presa de corrent abans de netejar-lo. No utilitzeu netejadors líquids ni aerosols. Utilitza l'anunciamp drap per netejar.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Pyle PT12050CH Ampsistema de mescla lifier
- Control remot
- Antena Bluetooth
- Suports de muntatge en bastidor desmuntables
- Cable d'alimentació
4. Producte acabatview
4.1 Controls del panell frontal
- MIC 1 & MIC 2 Inputs: 1/4'' microphone input jacks with independent LEVEL and TONE controls.
- TALK OVER Button: Activates microphone priority function, reducing background music volume when a microphone signal is detected.
- AUX 1, AUX 2, AUX 3 Inputs: 3.5mm auxiliary input jacks with independent LEVEL and TONE controls.
- USB/SD Card Slot: Per reproduir àudio files from USB flash drives or SD memory cards.
- Controls del reproductor MP3: Play/Pause, Stop, Previous, Next, Mode, and Volume controls for USB/SD/Bluetooth playback.
- Antena Bluetooth: For wireless Bluetooth connectivity.
- Channel Volume Controls (CH1-CH12): Independent rotary knobs to adjust the output volume for each of the 12 speaker channels.
- Interruptor d'alimentació: Gira el ampmés viu encès o apagat.
4.2 Connexions del panell posterior
- ENTRADA DE POTÈNCIA: Connexió del cable d'alimentació de CA.
- VOLTAGE SELECTOR: Switch to select between 115V and 230V AC power.
- RCA AUDIO INPUTS (L/R): Three pairs of RCA inputs for connecting external audio sources like CD players, tuners, or tape decks.
- SPEAKER OUTPUTS (CH1-CH12): Screw-type terminals for connecting up to 12 speakers.
- MIC INPUTS (1/2): Additional 1/4'' microphone inputs.
5. Configuració
5.1 Muntatge en bastidor
The PT12050CH amplifier is designed for standard rack mounting. Attach the included rack mount brackets to the sides of the unit using the provided screws. Secure the unit into a standard 19-inch equipment rack.
5.2 Connexió d'alimentació
- Before connecting the power cable, ensure the VOLTAGSELECCIONADOR switch on the rear panel is set to the correct voltage per a la vostra regió (115 V o 230 V). Volum incorrectetagLa selecció pot danyar la unitat.
- Connecteu el cable d'alimentació subministrat al ENTRADA DE POTÈNCIA on the rear panel of the ampmés viu.
- Plug the other end of the power cable into a suitable AC wall outlet.
5.3 Connexions d'altaveus
El amplifier supports 4-8 ohm impedance speakers. Connect your speakers to the SPEAKER OUTPUTS (CH1-CH12) on the rear panel. Ensure correct polarity (positive to positive, negative to negative) for each speaker to avoid phase issues.
5.4 Connexions de fonts d'àudio
- Entrades RCA: Connect external audio devices (e.g., CD player, DVD player, tuner) to the RCA AUDIO INPUTS (L/R) al panell posterior.
- Entrades AUX: Connect portable devices (e.g., smartphones, tablets) using a 3.5mm audio cable to the AUX 1, AUX 2, or AUX 3 endolls al panell frontal.
- Targeta USB/SD: Insert a USB flash drive or SD memory card into the respective slot on the front panel. The unit will automatically detect and begin playing compatible audio files.
- Entrades de micròfon: Connect microphones to the 1/4'' MIC 1 or MIC 2 jacks on the front panel, or to the additional 1/4'' MIC INPUTS on the rear panel.
6. Instruccions de funcionament
6.1 Encès/Apagat
Premeu el botó PODER interruptor del panell frontal per engegar el amplifier on or off. The power indicator light will illuminate when the unit is on.
6.2 Selecció d'entrada
El amplifier automatically detects and prioritizes inputs. For USB/SD/Bluetooth, use the MODE button on the MP3 player section to cycle through input sources. For RCA and AUX inputs, ensure the corresponding input is active and its level is adjusted.
6.3 Control de volum
- Volum del canal: Utilitza l'individu VOLUM knobs for CH1-CH12 to adjust the output level for each connected speaker zone.
- Volum del micròfon: Ajusteu el NIVELL knob for MIC 1 or MIC 2 to control microphone input volume.
- AUX Volume: Ajusteu el NIVELL knob for AUX 1, AUX 2, or AUX 3 to control auxiliary input volume.
- MP3 Player Volume: Use the dedicated volume controls in the MP3 player section for USB/SD/Bluetooth audio.
6.4 Vinculació Bluetooth
- Ensure the Bluetooth antenna is securely connected to the rear panel.
- Enceneu el ampmés viu.
- Premeu el botó MODE button on the MP3 player section until 'BLUETOOTH' is displayed.
- Activa el Bluetooth al teu telèfon intel·ligent, tauleta o ordinador.
- Cerca available devices and select 'PYLEUSA' from the list.
- Un cop emparellat, podeu reproduir àudio sense fil al ampmés viu.
Reproducció USB/SD de 6.5"
Insert a USB flash drive or SD card containing MP3 or WMA audio files into the corresponding slot. The amplifier will automatically switch to USB/SD mode and begin playback. Use the MP3 player controls (Play/Pause, Previous, Next) to manage your audio.
6.6 Microphone Operation and Voice Priority
Connect your microphone to one of the 1/4'' MIC input jacks. Adjust the microphone's NIVELL i TO controls for desired sound. Press the PARLAR DE button to activate the voice priority function. When active, the background music volume will automatically decrease when a signal is detected from MIC 1, making announcements clearer.
6.7 Tone and Echo Adjustments
Utilitza el TO knobs for each microphone and auxiliary input to adjust the treble and bass frequencies. The ECO control for MIC 1 and MIC 2 adds an echo effect to the microphone signal.
7. Manteniment
- Neteja: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use harsh chemicals, solvents, or abrasive cleaners.
- Ventilació: Comproveu regularment que les obertures de ventilació estiguin netes de pols i deixalles per evitar el sobreescalfament.
- Emmagatzematge: If storing the unit for an extended period, ensure it is in a cool, dry place, away from direct sunlight and extreme temperatures.
- Connexions de cable: Comproveu periòdicament totes les connexions dels cables per assegurar-vos que estiguin ben ajustades i que no presentin signes de desgast.
8. Solució De Problemes
If you encounter issues with your Pyle PT12050CH amplifier, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense poder | Power cable not connected; Power switch off; Incorrect voltage selection; Blown fuse. | Ensure power cable is securely connected. Turn on the POWER switch. Verify voltage selector is correct. Check and replace fuse if necessary (refer to qualified technician). |
| Sense sortida de so | Incorrect input selected; Volume levels too low; Speaker connections loose or incorrect; Faulty audio source. | Select the correct input source. Increase master and individual channel volume levels. Check all speaker wire connections for proper polarity and secure fit. Test with a different audio source. |
| Bluetooth no connectat | Amplifier not in Bluetooth mode; Device too far; Bluetooth not enabled on source device; Interference. | Assegureu-vos amplifier is in Bluetooth mode. Move source device closer to the amplifier. Enable Bluetooth on your device and re-scan. Avoid placing other wireless devices nearby. |
| Problemes de reproducció amb USB/SD | Sense suport file format; Corromput files; La targeta USB/SD no s'ha inserit correctament. | Assegureu-vos l'àudio files are MP3 or WMA format. Try a different USB/SD card. Re-insert the card/drive. |
| El micròfon no funciona | Microphone not connected; Microphone level too low; Faulty microphone. | Connect microphone securely. Increase MIC LEVEL knob. Test with a different microphone. |
| La unitat s'escalfa | Normal operation; Insufficient ventilation; Overloaded speakers. | Some warmth is normal. Ensure adequate ventilation around the unit. Verify speaker impedance is within 4-8 ohms. Reduce volume if excessive heat is observed. |
| Input source defaults to USB on power cycle | Comportament dissenyat. | This is a known operational characteristic. You will need to manually select your desired input source using the MODE button after each power cycle. |
| Volume defaults to low settings on power cycle | Comportament dissenyat. | This is a known operational characteristic. Adjust volume levels to your preference after each power cycle. |
9. Especificacions
- Model: PT12050CH
- Potència de sortida: 6000 Watts MÀXIM
- Canals: 12
- Impedància de l'altaveu: 4-8 Ohm
- Entrades: 3 x RCA Audio (L/R), 2 x 1/4'' Mic (front), 2 x 1/4'' Mic (rear), 3 x 3.5mm AUX, USB, SD Card, Bluetooth
- Versió Bluetooth: 2.1 (aproximadament)
- Interval sense fil Bluetooth: Més de 30 peus
- Mitjans digitals File Suport: MP3, WMA
- Característiques: Multi-Zone Audio Control, Voice Priority (Talk-Over), LCD Digital Display
- Pes de l'article: 15.97 lliures
- Dimensions: (Refer to product diagram for exact measurements)
10. Garantia i Suport
Pyle products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official Pyle USA website. You may also contact customer service for assistance with product registration, troubleshooting, or service inquiries.
Assistència en línia: www.pyleusa.com
