Hitachi BW-DV80E

Hitachi Beat Wash Vertical Washer Dryer BW-DV80E Instruction Manual

Model: BW-DV80E | Brand: Hitachi

1. Producte acabatview

The Hitachi Beat Wash Vertical Washer Dryer BW-DV80E is designed for efficient washing and drying of laundry. It features an 8kg washing capacity and a 4.5kg drying capacity, incorporating advanced technologies for optimal cleaning performance and user convenience.

2. Característiques clau

3. Configuració i instal·lació

3.1 Desembalatge i col·locació

Carefully unpack the washer dryer. Ensure the installation area has sufficient space. The unit requires a minimum width of 570mm and can fit into a waterproof pan with an inner depth of 540mm or more. Allow at least 10cm clearance for the product width and 10cm for height when considering entryways and stairs.

Installation dimensions for Hitachi BW-DV80E washer dryer
Figura 3.1: Installation dimensions and clearance requirements. Ensure adequate space for product width, depth, and height, especially when moving through doorways or up stairs. A minimum of 10cm extra width is recommended for entry points.

3.2 Connexions d'aigua i desguàs

Connect the water supply hose (approx. 0.8m included) to a water faucet and the washer dryer's inlet. Ensure the drain hose is properly connected to a drain outlet. The drain hose should be positioned at least 1cm from the left/right wall and 1cm from the back wall. The height of the washing machine body from the drain port should be +10 to +20cm. If using a waterproof pan, ensure its internal dimensions are sufficient.

Hitachi BW-DV80E washer dryer dimensions and control panel
Figura 3.2: Overall dimensions of the Hitachi BW-DV80E washer dryer, including width (61.0cm body width 57.0cm), depth (63.5cm), and height (104cm). The control panel is also visible, showing various function buttons and display.

4. Instruccions de funcionament

4.1 Funcionament bàsic

  1. Load laundry into the tub.
  2. Afegiu detergent i suavitzant als seus respectius dispensadors.
  3. Select the desired course using the control panel.
  4. Premeu el botó Inici/Pausa per començar el cicle.

4.2 AI Washing

The AI Washing feature automatically optimizes the wash cycle. Sensors detect various factors like soil level and water hardness. If the water is heavily soiled, the washing time will automatically extend to ensure thorough cleaning. Water usage, power consumption, and operation time may vary.

4.3 Hot Water Niagara Beat Wash

This course uses hot water mist (180 minutes) to prevent yellowing and inhibit room-drying odors. Warm air and tap water mist are applied simultaneously to clothes soaked in high-concentration detergent. This warms the clothes to approximately 30-40°C, activating detergent enzymes to remove sebum stains that cause yellowing and bacteria responsible for odors.

Before and after comparison of yellowing and odor removal with Hot Water Niagara Beat Wash
Figura 4.1: Visual comparison showing the effectiveness of the Hot Water Niagara Beat Wash in removing yellow stains and inhibiting odors from fabrics.

4.4 Niagara Rinse

The Niagara Rinse function ensures thorough removal of detergent. A large volume of circulating shower water and high-speed rotation rinse detergent from deep within the fibers. This process leaves no detergent residue.

Comparison of rinse effectiveness with and without Niagara Rinse
Figura 4.2: Illustration comparing water clarity after rinsing with and without the Niagara Rinse feature, demonstrating superior detergent removal.

4.5 Specialized Courses

Acabatview of Quick Wash, Delicate, and Fashion courses
Figura 4.3: Visual guide to the Quick Wash, Delicate, and Fashion courses, showing recommended load sizes and typical items.
Acabatview of Dust Mite Control, Deodorizing, and Pollen courses
Figura 4.4: Visual guide to the Dust Mite Control, Deodorizing, and Pollen courses, highlighting their specific benefits.
Acabatview of Quick Dry and Low-Temperature Drying courses
Figura 4.5: Visual guide to the Quick Dry and Low-Temperature Drying courses, illustrating their drying capabilities and benefits for different fabric types.

5. Manteniment

5.1 Auto Self-Clean

The Auto Self-Clean function helps maintain the cleanliness of the washing tub. After rinsing, clean tap water is showered from above to wash away dirt from the inner and outer tubs. This feature reduces bacteria and mold by 99% in both the outer and stainless steel inner tubs. This process adds approximately 6L of water and 4 minutes to the cycle.

Diagram of the Auto Self-Clean function in Hitachi washer dryer
Figura 5.1: Diagram illustrating the Auto Self-Clean process, where clean tap water showers the inner and outer tubs after rinsing to remove dirt and inhibit mold growth.

5.2 Neteja del filtre de borrissol

Regularly clean the lint filter to ensure optimal performance. The lint filter is designed for easy removal and cleaning, allowing you to dispose of lint without touching it and rinse the filter with water.

Instructions for cleaning the lint filter
Figura 5.2: Step-by-step guide on how to remove and clean the lint filter, emphasizing its user-friendly design for hygienic maintenance.

5.3 Neteja general

The washer dryer features a glass top design that is resistant to scratches and easy to clean. The wide opening makes loading and unloading laundry simple, and the minimal steps around the opening facilitate easy wiping and cleaning.

Features for easy loading and cleaning of the washer dryer
Figura 5.3: Illustration highlighting the wide opening (approx. 38cm width) and glass top design, which contribute to easy loading, unloading, and overall cleaning of the appliance.

6. Solució De Problemes

If the appliance does not operate as expected, please refer to the following common issues before contacting customer support:

If the problem persists after checking these points, please contact Hitachi customer service.

7. Especificacions

CaracterísticaEspecificació
Número de modelBW-DV80E
MarcaHitachi
Capacitat de rentat8 kg
Capacitat d'assecat4.5 kg
Dimensions externes (P x A x A)63.5 cm x 61 cm x 104 cm (including handle, drain hose, water supply hose attachment)
Body Width (excluding handle/hoses)57 cm
Pes del producteAprox. 52 kg
ColorBlanc
Tipus de controlPulsador
Característiques especialsAutomatic Detergent Dispensing (AI Washing)
Components inclososOne-touch joint, Water supply hose (approx. 0.8m), Hot water supply hose (approx. 4m), Clean filter, Hot water supply hose hanger, Foot caps (for height adjustment), Suction nozzle, Under tray

8. Garantia i Suport

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details. For technical support, service, or inquiries, please contact Hitachi customer service. Keep your purchase receipt and product serial number handy when contacting support.

Contact information for customer service can typically be found on the Hitachi official weblloc web o a la documentació que s'inclou amb l'aparell.

Documents relacionats - BW-DV80E

Preview Manual d'instruccions de la rentadora-assecadora Hitachi BD-D80CVE
Manual d'instruccions complet per a la rentadora-assecadora de càrrega frontal Hitachi BD-D80CVE, que cobreix la seguretat, la instal·lació, el funcionament, el manteniment i la resolució de problemes.
Preview Manual d'instruccions de la rentadora Hitachi: BD-70CVE, BD-80CVE
Manual d'usuari per a rentadores de càrrega frontal Hitachi (BD-70CVE, BD-80CVE). Cobreix la seguretat, la instal·lació, el funcionament, el manteniment, la resolució de problemes i les especificacions tècniques per a un ús òptim de l'aparell.
Preview Guia de referència de l'API REST de la plataforma d'emmagatzematge virtual de Hitachi
Una guia completa per utilitzar l'API REST per a la plataforma d'emmagatzematge virtual Hitachi sèrie 5000, sèrie E, G130, G/F350, G/F370, G/F700, G/F900, que cobreix la configuració del sistema, la gestió d'usuaris, l'assignació de volums i molt més.
Preview Manual d'instruccions i seguretat de la serra composta Hitachi C12LCH/C12LC/C12FCH
Aquest manual detalla les instruccions de seguretat, el funcionament i el manteniment de les serres compostes Hitachi C12LCH, C12LC i C12FCH. Apreneu a utilitzar amb seguretat aquestes eines de tall de precisió per a marcs de fusta i alumini.
Preview Guia de referència de l'API REST de la plataforma d'emmagatzematge virtual de Hitachi
Una guia completa per utilitzar l'API REST per a sistemes d'emmagatzematge Hitachi Virtual Storage Platform sèrie 5000, sèrie E, G130, G/F350, G/F370, G/F700, G/F900 amb SVOS RF 9.8.1 i 9.6.
Preview Manual d'usuari de la rentadora Hitachi LTL 08M00 / LTL 10M00
Manual d'usuari per a les rentadores Hitachi LTL 08M00 i LTL 10M00, que proporciona instruccions d'ús, manteniment i informació de seguretat.