Introducció
This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.
The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.
Informació de seguretat
Always adhere to the following safety guidelines to prevent electric shock, fire, or injury:
- Assegureu-vos que la font d'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
- La instal·lació l'ha de dur a terme un electricista qualificat d'acord amb les normes elèctriques locals.
- No exposa la lamp to excessive moisture or extreme temperatures.
- Do not attempt to open or modify the lamp housing, as this may void the warranty and pose a safety risk.
- Mantingueu els materials d'embalatge lluny dels nens.
Contingut del paquet
Verifiqueu que tots els components siguin presents i no estiguin danyats:
- Beghelli 19432 LED Emergency Lamp unitat
- Integrated Li-Fe Battery
- Accessoris de muntatge (cargols, tacs de paret)
- Manual d'usuari (aquest document)
Configuració i instal·lació
The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:
- Trieu una ubicació: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
- Prepareu la superfície de muntatge: Ensure the wall surface is clean, dry, and capable of supporting the lamp's weight.
- Marca els punts de perforació: Utilitzeu la lamp's mounting holes as a template to mark the drilling points on the wall.
- Forats: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
- Inseriu els endolls de paret: Inseriu els endolls de paret proporcionats als forats perforats.
- Muntar la Lamp: Assegureu la lamp to the wall using the provided screws. Ensure it is firmly attached.
- Connectar l'alimentació: Connecteu la lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
- Càrrec inicial: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.
Instruccions de funcionament
The Beghelli 19432 operates automatically:
- Funcionament normal: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
- Mode d'emergència: In the event of a power failure, the lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
- Torna a la normalitat: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
- Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)
Manteniment
Regular maintenance ensures the longevity and reliability of your emergency lamp:
- Neteja: Netegeu la lampl'exterior amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Comprovació de la bateria: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
- Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
- Substitució de la bateria: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
- Lamp Substitució: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.
Resolució de problemes
Consulteu la taula següent per veure els problemes habituals i les seves solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp does not illuminate during power outage. | Battery not charged or faulty. Cablejat incorrecte. Lamp culpa. | Assegureu-vos lamp has been connected to power for at least 24 hours. Comproveu les connexions del cablejat. If problem persists, contact qualified service personnel. |
| Lamp roman encesa constantment. | Problema amb la font d'alimentació principal. Falla interna. | Verify main power supply is stable. Disconnect and reconnect power. If issue persists, contact qualified service personnel. |
| Reduced illumination duration. | Degradació de la bateria. Càrrega insuficient. | Perform annual full discharge/recharge cycle. Ensure continuous power supply for charging. Battery may need replacement by qualified personnel. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 19432 |
| Marca | Beghelli |
| Font de llum | LED |
| Flux lluminós | 1200 lúmens |
| Consum d'energia | 24 watts |
| Tipus de bateria | Li-Fe (Lithium Iron) |
| Material | Policarbonato (Polycarbonate) |
| Color | Blanc |
| Àrea d'aplicació | Commercial, Emergency Exit |
| Tipus de muntatge | Wall Mount (Parete) |
| Tipus de canvi | Automàtic |
| Primer disponible | 16 de maig de 2019 |
Garantia i Suport
For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.
For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli weblloc web o a l'embalatge del producte.
Informació sobre reciclatge: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.





