lightmaXX CLS Nano RGBW - LED Spot Set User Manual

Producte acabatview

The lightmaXX CLS Nano RGBW is an LED lighting system featuring four spotlights, designed for use on theater and stage productions. Its compact size and low weight also make it suitable for mobile applications.

Each spotlight is equipped with three powerful 4W QCL LEDs, contributing to a total power consumption of 48 watts. The COB LEDs incorporate red, green, blue, and white primary colors, allowing for the creation of a wide spectrum of other colors through mixing. The beam angle is 25 degrees. Additionally, the QCL LEDs offer stepless dimming from 0-100% and can produce a powerful strobe effect. Control options include DMX and music control.

The lightmaXX CLS Nano RGBW LED Spot Set, showcasing its four individual spotlights mounted on a central bar, with the LEDs emitting green light.

Instruccions de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans de fer servir el dispositiu. Si no ho feu, podeu patir lesions o danys al producte.

• Connecteu sempre el dispositiu a una presa de corrent amb terra.
• Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
• No exposeu el dispositiu a la pluja o la humitat.
• Eviteu l'exposició directa dels ulls a la font de llum.
• Only qualified personnel should perform service or repairs.
• Desconnecteu de l'alimentació abans de netejar o fer manteniment.

Configuració

Desembalatge

Carefully remove the CLS Nano RGBW from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future storage or transport.

Muntatge

The CLS Nano RGBW is designed for secure mounting on a lighting stand or truss system. Use appropriate clamps and safety cables (not included) to ensure the unit is securely fastened and cannot fall. Ensure the mounting surface can support the weight of the fixture (7.13 kg).

Connexions

Connecteu el dispositiu de la següent manera:

• Connexió d'alimentació: Use the provided IEC power cable to connect the unit to a suitable mains power outlet.
• Connexió DMX (opcional): For DMX control, connect a 3-pin XLR DMX cable from your DMX controller's output to the unit's DMX IN port. If linking multiple units, connect from the first unit's DMX OUT to the next unit's DMX IN.

Part posterior detallada view of the lightmaXX CLS Nano RGBW, highlighting the power input, DMX In/Out ports, and the digital control display with navigation buttons.

Instruccions de funcionament

Tauler de control acabatview

The control panel on the rear of the unit features a digital display and four buttons:

• MENÚ: Navigates through the main menu options.
• AMUNT: Increases values or moves up through menu options.
• BAIX: Decreases values or moves down through menu options.
• ENTRAR: Confirma les seleccions o accedeix a submenús.

Modes de funcionament

The CLS Nano RGBW offers several operating modes:

• Mode DMX: For external control via a DMX controller.
• Mode automàtic: Runs pre-programmed light shows automatically.
• Mode activat per so: Reacts to music or sound via a built-in microphone.
• Mode de color estàtic: Mostra un únic color constant.

Control DMX

To operate the unit via DMX, set the DMX address using the control panel. Refer to the DMX channel chart in the full manual for specific channel functions (e.g., Dimmer, Red, Green, Blue, White, Strobe, Programs).

Programes automàtics

Navigate to the Auto mode setting using the MENU button. Use UP/DOWN to select different built-in programs. Press ENTER to confirm. Some programs may allow adjustment of speed or intensity.

Mode activat per so

Select the Sound-Activated mode from the menu. The unit will use its internal microphone to react to ambient sound. Adjust the microphone sensitivity if available in the menu to fine-tune the response.

Mode de color estàtic

In Static Color mode, you can manually select a desired color. Use the UP/DOWN buttons to adjust the intensity of Red, Green, Blue, and White LEDs to create custom colors.

The lightmaXX CLS Nano RGBW LED Spot Set displaying a vibrant red color output from its four spotlights.

The lightmaXX CLS Nano RGBW LED Spot Set illuminating with a deep blue color.

The lightmaXX CLS Nano RGBW LED Spot Set producing a bright white light.

The lightmaXX CLS Nano RGBW LED Spot Set emitting a warm yellow light.

The lightmaXX CLS Nano RGBW LED Spot Set displaying a cool cyan light.

The lightmaXX CLS Nano RGBW LED Spot Set showcasing a rich purple illumination.

The lightmaXX CLS Nano RGBW LED Spot Set with its spotlights in an off state, showing the clear lenses.

Manteniment

Neteja

Regular cleaning helps maintain optimal performance and appearance. Disconnect the unit from power before cleaning.

• Use a soft, lint-free cloth to wipe down the exterior.
• Per a les lents, feu servir un netejador de lents especialitzat i un drap suau per evitar ratllades.
• No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius.

Emmagatzematge

When not in use for extended periods, store the CLS Nano RGBW in its original packaging or a suitable flight case. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Resolució de problemes

Aquesta secció tracta problemes comuns que podeu trobar. Si el problema persisteix, poseu-vos en contacte amb l'atenció al client.

Especificacions

Garantia i Suport

This lightmaXX product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact the seller directly.

For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your authorized lightmaXX dealer or the manufacturer's customer service department. Keep your purchase receipt and model number (LIG0015656-000) ready when contacting support.