1. Introducció
This manual provides essential instructions for the proper use and care of AK Interactive Real Color Air Paint, specifically the RC214 Light Grey (Lichtgrau) shade. This product is a high-quality acrylic lacquer paint designed for model building and hobby applications, formulated for smooth airbrush application and excellent adhesion.
Image 1.1: A 10ml bottle of AK Interactive Real Color Air Paint in Light Grey (Lichtgrau), model RC214, with a black ribbed cap. The label clearly displays "LICHTGRAU LIGHT GREY" and the AK Interactive logo.
2. Configuració i preparació
Before application, proper preparation of the paint and equipment is crucial for optimal results.
2.1. Paint Preparation
- Agitar bé: Thoroughly shake the paint bottle for at least one minute to ensure all pigments are evenly mixed. The paint should have a consistent color and texture.
- Aprimament: This paint is designed for airbrush use and may require thinning. Use AK-Interactive's specific thinner for acrylic lacquer paints, or a compatible thinner from other manufacturers. Start with a thinning ratio of 1 part paint to 1-2 parts thinner, adjusting as needed for your airbrush and desired consistency. The paint should flow smoothly without clogging.
- Spray de prova: Always perform a test spray on a scrap piece of material to check consistency, color, and airbrush performance before applying to your model.
2.2. Workspace and Safety
- Ensure your workspace is well-ventilated.
- Wear appropriate personal protective equipment, including a respirator mask and gloves, to avoid inhaling paint fumes and skin contact.
- Protect your work surface from overspray.
3. Operating Instructions (Airbrush Application)
Follow these guidelines for effective airbrush application of AK Interactive Real Color Air Paint.
- Pressió de l'aire: Recommended air pressure typically ranges from 15-25 PSI (1.0-1.7 bar), depending on your airbrush, needle size, and paint consistency. Adjust to achieve a fine mist without sputtering.
- Tècnica d'aplicació:
- Hold the airbrush approximately 5-10 cm (2-4 inches) from the surface.
- Apply paint in thin, even coats. Avoid applying too much paint at once to prevent pooling or runs.
- Overlap each pass slightly to ensure uniform coverage.
- Temps d'assecat: The paint dries quickly to the touch, typically within minutes. Allow sufficient time between coats (5-15 minutes) for optimal adhesion and to prevent lifting. Full cure time may vary but is generally within 24 hours.
- Capes: Multiple thin coats are preferable to one thick coat for a smoother finish and better detail preservation.
4. Manteniment i emmagatzematge
4.1. Airbrush Cleaning
- Clean your airbrush immediately after each use with the appropriate lacquer thinner or airbrush cleaner.
- Flush the airbrush thoroughly until no paint residue is visible.
- Disassemble and clean components (needle, nozzle, cap) periodically for deep cleaning and to prevent clogs.
4.2. Paint Storage
- Store the paint bottle upright in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure the cap is tightly sealed to prevent the paint from drying out or thickening.
- Mantenir fora de l'abast dels nens i mascotes.
5. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Airbrush Clogging | Paint too thick, insufficient cleaning, dried paint in nozzle. | Thin paint further, clean airbrush thoroughly after each use, perform deep cleaning of nozzle and needle. |
| Poor Adhesion / Lifting | Surface not clean, paint applied too thickly, insufficient drying time between coats. | Ensure surface is clean and free of oils/dust. Apply thinner coats. Allow adequate drying time between coats. |
| Uneven Finish / Orange Peel | Paint too thick, air pressure too high/low, airbrush held too far from surface. | Adjust thinning ratio. Optimize air pressure. Hold airbrush closer to the surface. |
| Paint Sputtering | Paint too thick, low air pressure, partial clog, loose nozzle. | Thin paint, increase air pressure, clean airbrush, check nozzle for tightness. |
6. Especificacions del producte
| Característica | Detall |
|---|---|
| Marca | AK Interactive |
| Número de model | RC214 (amz-AK-RC214) |
| Color | Light Grey (Lichtgrau) |
| Tipus de pintura | Laca acrílica |
| Volum de l'article | 10 mil·lilitres |
| Ús interior/exterior | Interior, Exterior |
| Cobertura | Complet |
| Dimensions del producte | 1 x 1.5 x 1 polzades |
| Pes de l'article | 1.76 unces |
7. Garantia i Suport
Specific warranty information for AK Interactive Real Color Air Paint is not provided in the product data. For detailed warranty terms or technical support, please refer to the official AK Interactive weblloc web o contacteu directament amb el seu servei d'atenció al client.
When contacting support, please have your product model number (RC214) and purchase details available.
