JOYO JF-14 American Sound Overdrive Guitar Pedal Instruction Manual

1. Introducció

The JOYO JF-14 American Sound Overdrive Guitar Pedal is designed to simulate the tone of classic American tube amplifiers, offering a range of sounds from clean to overdrive. This pedal provides versatile tone shaping capabilities for guitarists seeking authentic amplifier characteristics in a compact pedal format.

Figure 1: JOYO JF-14 American Sound Overdrive Guitar Pedal. This image displays the pedal's top panel with its six control knobs and footswitch.

2. Configuració

2.1 Font d'alimentació

The JF-14 pedal requires a DC 9V power supply. Ensure the power supply is center-negative and provides sufficient current for stable operation. Connect the power adapter to the DC 9V input jack located on the side of the pedal.

2.2 Connexions

• Entrada (IN): Connect your guitar to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
• Sortida (OUT): Connecteu la presa OUTPUT del costat esquerre del pedal al vostre amplifier's input or other effects pedals in your signal chain using a standard 1/4-inch instrument cable.

Figura 2: Example of JOYO pedals, including the American Sound, showing input/output jacks and power input.

3. Instruccions de funcionament

The JF-14 features six control knobs and a footswitch for engaging/bypassing the effect.

3.1 botons de control

• BAIX: Adjusts the low-frequency response (bass).
• MITJÀ: Adjusts the mid-range frequency response.
• ALTA: Adjusts the high-frequency response (treble).
• NIVELL: Controls the overall output volume of the pedal.
• VEU: This crucial knob shapes the amplifier's character, ranging from a 'silverface' tone to a 'blackface' or 'tweed' sound. It interacts significantly with the MID knob.
• CONDUIR: Adjusts the amount of gain/overdrive.

3.2 Interruptor de peu

Press the footswitch to toggle the effect ON or OFF. A red LED indicator illuminates when the effect is active.

3.3 Tone Shaping Tips

Experiment with the VOICE and EQ (LOW, MID, HIGH) knobs to discover a wide range of tones. The VOICE knob is particularly interactive and can drastically alter the pedal's character. Adjusting the DRIVE knob will introduce more distortion, mimicking a cranked tube ampmés viu.

Video 1: Demonstration of JOYO JF-13, JF-14, and JF-16 pedals, showcasing their amplifier simulation capabilities. This video provides an overview of the American Sound pedal's tonal range.

Video 2: Detailed demonstration of the JOYO JF-14 American Sound pedal, highlighting its various settings and sounds.

4. Manteniment

• Neteja: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents.
• Emmagatzematge: Guardeu el pedal en un lloc sec, allunyat de temperatures extremes i de la llum solar directa.
• Potència: Always disconnect the power supply when the pedal is not in use for extended periods.

5. Solució De Problemes

• Sense so:
  • Comproveu totes les connexions dels cables (guitarra a l'entrada, sortida a amp, power supply).
  • Assegureu-vos que la font d'alimentació estigui connectada correctament i que funcioni.
  • Verify that your guitar and ampel lifier funcionen correctament.
• Soroll/bruix no desitjat:
  • Ensure you are using a regulated, isolated DC 9V power supply.
  • Comproveu si hi ha cables defectuosos.
  • Move the pedal away from other electronic devices that might cause interference.
• Efecte no atractiu:
  • Confirm the power supply is connected and providing power (LED should light up when engaged).
  • Test the footswitch functionality.

6. Especificacions

7. Suport

For any product issues or inquiries, please refer to your order details and send a message to the seller. JOYO is committed to providing the best possible service.