1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your MokerLink 6 Port PoE Switch (Model 4 PoE + 2 FE). This unmanaged switch is designed to provide both data and power over Ethernet cables to compatible devices, simplifying network deployment. Please read this manual thoroughly before using the device to ensure proper and safe operation.
2. Producte acabatview
2.1 Característiques clau
- 6 ports: Includes 4 Power over Ethernet (PoE) ports and 2 Fast Ethernet (FE) Uplink ports, all supporting 10/100Mbps speed.
- High PoE Power: Maximum support of 78W total output power, with a built-in power supply. Each PoE port provides up to 30W, compliant with IEEE 802.3af/at standards. Nota: No admet PoE passiu de 24 V.
- Plug & Play no gestionat: Features Power Detection function to automatically identify and power PoE-compatible devices. Provides data connectivity for non-PoE devices. No configuration required.
- Funció d'ampliació: When activated, PoE ports can extend data and power transmission up to 250 meters (820 ft) at 10Mbps, with port isolation for enhanced network safety.
- Disseny durador: Built with a fanless metal housing for quiet operation and effective heat dissipation. Includes LED indicator lights for status monitoring.
- Aplicació versàtil: Suitable for IP cameras, Wireless Access Points, IP Phones, and other network devices.
2.2 Contingut del paquet
- 1 x MokerLink 6 Port 10/100Mbps PoE+ Switch (4 PoE + 2 FE)
- 1 x cable d'alimentació CA
- 4 x Screws with nuts
- 2 x Hanger (for mounting)
- 1 x Manual d'usuari
2.3 Disposició del panell frontal
The front panel of the switch features all network ports and status indicators.
Figure 1: Front Panel of the MokerLink 6 Port PoE Switch. It displays 4 PoE ports (1-4), 2 Uplink ports (5-6), a power indicator, and an Extend/Default mode switch.
- Ports PoE (1-4): These four ports support Power over Ethernet (PoE+) and data transmission at 10/100Mbps. Connect PoE-compatible devices such as IP cameras or Wireless Access Points here.
- Uplink Ports (5-6): These two ports are Fast Ethernet (FE) uplink ports, supporting 10/100Mbps data transmission. Connect these to your router, NVR, or other network devices for data connectivity.
- Indicador d'alimentació: S'il·lumina quan l'interruptor està encès.
- Extend/Default Switch: Toggles between standard operation (Default) and extended range mode (Extend).
2.4 Disseny del panell posterior
The rear panel contains the AC power input.
Figure 2: Rear Panel of the MokerLink 6 Port PoE Switch. It features the standard AC power input socket.
3. Configuració
3.1 Instal·lació física
- Col·locació: Place the switch on a stable, flat surface or mount it to a wall using the provided hangers and screws. Ensure adequate ventilation around the device.
- Connexió d'alimentació: Connect the supplied AC power cable to the power input on the rear panel of the switch and then to a standard electrical outlet. The Power LED on the front panel should illuminate.
Figure 3: Wall mounting option for the PoE Switch.
3.2 Connexió de xarxa
- Connecteu els dispositius PoE: Use standard Ethernet cables to connect your PoE-compatible devices (e.g., IP cameras, Wireless APs) to ports 1-4. The switch will automatically detect and power these devices.
- Connect Non-PoE Devices/Uplink: Connect your router, NVR, or other non-PoE network devices to the Uplink ports (5-6) using standard Ethernet cables. These ports provide data connectivity only.
Figure 4: Connecting various devices to the PoE switch. IP cameras, Wireless APs, and IP phones connect to PoE ports for data and power. Routers, computers, and NVRs connect to uplink ports for data only.
4. Instruccions de funcionament
The MokerLink 6 Port PoE Switch is a plug-and-play device, requiring no software configuration. Once powered on and connected, it will automatically begin functioning.
4.1 Indicadors LED
Monitor the status of the switch and connected devices using the front panel LEDs:
- LED d'alimentació:
- A: L'interruptor està engegat.
- Apagat: L'interruptor està apagat.
- LED d'enllaç/acció (per port):
- A: A device is connected and a link is established.
- Parpellejant: S'està produint activitat de dades al port.
- Apagat: No device is connected or no link is established.
- LED PoE (per port PoE):
- A: S'està subministrant alimentació al dispositiu PoE connectat.
- Apagat: No power is being supplied (either not a PoE device or an issue exists).
5. Extend Mode and VLAN Function
5.1 Mode d'ampliació
The switch features an 'Extend' mode, controlled by a physical switch on the front panel. This mode is useful for deploying PoE devices over longer distances.
Figure 5: Comparison of Default and Extend modes for PoE range and speed.
- Mode predeterminat: Standard operation, supporting up to 100 meters (328 ft) at 10/100Mbps.
- Mode d'ampliació: When the switch is set to 'Extend', the PoE ports (1-4) can transmit data and power up to 250 meters (820 ft). In this mode, the data speed for these ports is reduced to 10Mbps. This is ideal for long-distance surveillance camera deployments.
5.2 Port Isolation (VLAN)
When the 'Extend' mode is active, the PoE ports (1-4) are isolated from each other. This means that devices connected to these ports cannot directly communicate with each other, enhancing network security and preventing broadcast storms. All isolated ports can still communicate with the Uplink ports (5-6).
Figure 6: Port Isolation (VLAN) in Extend Mode. Devices on ports 1-4 are isolated from each other but can communicate with uplink ports.
6. Manteniment
6.1 Neteja
- Ensure the switch is powered off and unplugged before cleaning.
- Utilitzeu un drap suau i sec per netejar l'exterior del dispositiu.
- No utilitzeu netejadors líquids o en aerosol, ja que poden fer malbé el dispositiu.
6.2 Consideracions ambientals
- Operate the switch within the specified temperature range of -10°C to 55°C (14°F to 131°F).
- Eviteu col·locar l'interruptor a la llum solar directa o a prop de fonts de calor.
- Ensure proper airflow around the device, especially since it is fanless and relies on passive cooling.
- Keep the switch away from moisture and excessive dust.
Figure 7: Fanless design for silent operation.
7. Solució De Problemes
Si teniu problemes amb el vostre commutador PoE MokerLink, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense indicació LED d'engegada | Power cable not connected or faulty power source. | Ensure the AC power cable is securely connected to the switch and a working power outlet. Test the outlet with another device. |
| No hi ha cap LED d'enllaç/acció per a un dispositiu connectat | Faulty Ethernet cable, incorrect port connection, or device issue. | Verify the Ethernet cable is securely connected at both ends. Try a different cable. Ensure the device is powered on and functioning correctly. |
| El dispositiu PoE no rep alimentació (LED PoE apagat) | Device is not PoE-compatible, cable issue, or power budget exceeded. | Confirm the device is IEEE 802.3af/at compliant. Check the Ethernet cable for damage. Ensure the total power consumption of all PoE devices does not exceed 78W. |
| Slow network speed in Extend mode | Aquest és el comportament esperat. | In Extend mode, the speed is intentionally reduced to 10Mbps to achieve longer transmission distances. This is not a fault. |
| Devices on PoE ports cannot communicate with each other | Extend mode is active, enabling port isolation. | This is the intended function of port isolation in Extend mode. If direct communication between PoE devices is required, switch the device to Default mode. |
8. Especificacions
The following table outlines the technical specifications for the MokerLink 6 Port PoE Switch (4 PoE + 2 FE):
| Característica | Especificació |
|---|---|
| Número de model | 4 PoE + 2 FE |
| Nombre de Ports | 6 (4 PoE+, 2 Fast Ethernet Uplink) |
| Velocitat de transferència de dades | 10/100 Mbps |
| Estàndard PoE | IEEE 802.3af / at |
| Potència PoE màxima | 78 watts (total) |
| Potència màxima per port PoE | 30 watts |
| Tipus d'interfície | RJ45 |
| Material de la caixa | Metall |
| Disseny sense ventiladors | Sí |
| Extend Mode Range | Up to 250 meters (820 ft) at 10Mbps |
| Temperatura de funcionament | -10 °C a 55 °C (de 14 °F a 131 °F) |
| Dimensions del producte | 7.87 x 4.65 x 1.73 polzades |
| Pes de l'article | 1.89 lliures |
| Entrada Voltage | AC 100-240V (Built-in Power Supply) |
9. Informació de seguretat
- No obriu el dispositiu casing. No hi ha peces que l'usuari pugui reparar a l'interior.
- Mantingueu el dispositiu allunyat de l'aigua, el foc, la humitat o els ambients calents.
- Utilitzeu només l'adaptador d'alimentació subministrat amb el dispositiu.
- Assegureu-vos una correcta connexió a terra per a la seguretat elèctrica.
- Eviteu col·locar objectes pesats a l'interruptor.
- Desconnecteu el subministrament elèctric durant tempestes elèctriques o quan no es faci servir durant períodes prolongats.
Figure 8: MokerLink PoE Switch with key features.
10. Garantia i Suport
10.1 Informació de la garantia
This MokerLink product is typically covered by a standard return policy, which allows for returns or replacements within 30 days of purchase. Please refer to your purchase platform's specific return policy for detailed terms and conditions.
10.2 Suport tècnic
For technical assistance or further inquiries regarding your MokerLink 6 Port PoE Switch, please contact MokerLink customer support through their official channels or the retailer from whom the product was purchased. Contact information can usually be found on the MokerLink official weblloc web o dins de l'embalatge del producte.
