1. Informació de seguretat
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.
- ADVERTÈNCIA: RISC D'INCEND. Always turn off main power at the circuit breaker before installation or servicing.
- Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
- Use only with 120V AC, 60Hz circuits.
- Assegureu-vos que totes les connexions elèctriques siguin segures i que compleixin els codis i les ordenances locals.
- No altereu ni modifiqueu la fixació.
- Apte per a llocs humits.
2. Producte acabatview
The ECOELER 6-inch LED Disk Light (Model CDR616D-940) is a versatile and energy-efficient lighting solution designed for flush mount or recessed installation. It features a durable aluminum trim, provides 4000K Cool White illumination, and is dimmable from 5% to 100%.
Figura 2.1: Frontal view of the ECOELER 6-inch LED Disk Light.
Característiques principals:
- Alta qualitat: 7.5-inch round metal cover for corrosion protection and rust prevention.
- Eficient energètic: 16.5 watts, 1000 lumens, with a 50,000-hour lifespan.
- Smooth Dimmable: Ajusteu la brillantor de l'5% al 100%.
- Fàcil instal·lació: Can be installed into recessed cans or junction boxes.
- Àmplies aplicacions: Suitable for wet locations like bathrooms, kitchens, and outdoor covered areas.
- Seguretat assegurada: ETL Listed and FCC compliant.
Figura 2.2: Mésview of key product functions and specifications.
Figure 2.3: Product authentication and certifications.
3. Especificacions
| Marca | ECOELER |
| Número de model | CDR616D-940 |
| Temperatura de color | 4000K blanc fred |
| Material | Acrylic, Aluminum, Polycarbonate |
| Wattage | 16.5 watts |
| Brillantor | 1000 lúmens |
| Voltage | 120 volts (CA) |
| Dimensions del producte | 7.25 cm de llargada x 7.25 cm d'amplada x 0.95 cm d'alçada |
| Tipus d'instal·lació | Flush Mount (fits 5"/6" recessed housings or 3.5" & 4" J-BOX) |
| Característiques especials | 5%-100% Dimmable, Aluminum frame, Energy Efficient, Instant On, LED light source |
| Ús interior/exterior | Indoor (suitable for wet locations) |
| Certificacions | ETL Listed, FCC Compliant |
Figura 3.1: Dimensions del producte per a la planificació de la instal·lació.
4. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- LED Disk Light Fixture
- E26 Adapter (for recessed can installation)
- 2 Spring Clips (for recessed can installation)
- 2 Screws (for J-box installation)
- 3 femelles de filferro
- J-box mounting screw
Figure 4.1: Included accessories and wiring diagram.
5. Configuració i instal·lació
Before starting, ensure the power is turned off at the circuit breaker.
Option 1: Installation into a Junction Box (J-Box)
- Apagueu l'alimentació a l'interruptor.
- Connect the wires from the disk light fixture to the junction box wires using the provided wire nuts: black to black (line), white to white (neutral), and green/bare copper to green/bare copper (ground).
- Attach the disk light to the junction box using the provided screws. Ensure the fixture is flush with the ceiling.
- Resta l'alimentació al disjuntor.
Option 2: Installation into a Recessed Can
- Apagueu l'alimentació a l'interruptor.
- If applicable, remove the existing bulb and trim from the recessed can.
- Screw the E26 adapter into the existing bulb socket within the recessed can.
- Connect the wires from the disk light fixture to the E26 adapter wires using the provided wire nuts: black to black, white to white.
- Attach the spring clips from the disk light to the housing slots inside the recessed can.
- Gently push the disk light into the recessed can until it sits flush with the ceiling.
- Resta l'alimentació al disjuntor.
Figure 5.1: Step-by-step installation guide for J-Box and Recessed Can.
6. Instruccions de funcionament
Once installed and power is restored, the ECOELER LED Disk Light operates like a standard light fixture controlled by a wall switch.
Regulabilitat:
This fixture is designed to be dimmable from 5% to 100% with compatible LED dimmers. For optimal performance, use an LED-compatible dimmer switch. Refer to your dimmer switch's instructions for specific operation.
Figure 6.1: Dimmability range of the LED Disk Light.
Temperatura de color:
This specific model provides 4000K Cool White light, suitable for various environments requiring bright, neutral illumination.
Figura 6.2: Examples of different color temperatures (this model provides 4000K Cool White).
7. Manteniment
The ECOELER LED Disk Light requires minimal maintenance.
- Neteja: Assegureu-vos que l'alimentació estigui apagada abans de netejar-la. Netegeu l'aparell amb un drap suau, sec o lleugerament humit.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
- Substitució de bombetes: The LED light source is integrated and not user-replaceable. The fixture has a long lifespan of approximately 50,000 hours.
8. Solució De Problemes
If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén |
|
|
| Light flickers or dims inconsistently |
|
|
| La llum no és tan brillant com s'esperava |
|
|
If the problem persists after attempting these solutions, please contact ECOELER customer support.
9. Garantia
ECOELER provides a five-year limited warranty for this product, excluding damage caused by human factors, extreme weather conditions, or other non-manufacturing related issues. Please retain your proof of purchase for warranty claims.
10. Suport
For technical assistance, warranty inquiries, or any questions regarding your ECOELER LED Disk Light, please contact ECOELER customer service. You can find contact information on the official ECOELER weblloc web o a través de la vostra plataforma de compra.
