House of Marley Stir It Up Wireless Turntable

Introducció

The House of Marley Stir It Up Wireless Turntable offers a premium vinyl listening experience with the convenience of Bluetooth connectivity. Crafted with sustainable materials, this turntable features a built-in pre-amp, two-speed belt drive, and a replaceable Audio Technica cartridge, delivering superior audio quality for your favorite records.

Image: The Stir It Up Wireless Turntable connected to House of Marley speakers, showcasing its design and connectivity.

Informació de seguretat

• Read all instructions before operating the turntable.
• Keep the turntable away from water or moisture.
• No obstruïu cap obertura de ventilació.
• Utilitzeu només accessoris/accessoris especificats pel fabricant.
• Unplug the turntable during lightning storms or when unused for long periods.
• Demaneu tot el servei a personal de servei qualificat.

Contingut del paquet

Verifiqueu que tots els components siguin presents a la caixa:

• House of Marley Stir It Up Wireless Turntable
• Adaptador d'alimentació
• Cable RCA
• Cable USB
• Plat giratori
• Silicone Slip Mat
• Drive Belt (often pre-installed or located around the platter)
• Contrapès
• Adaptador de 45 RPM
• Rewind Fabric Dust Cover

Producte acabatview

Imatge: Superior view highlighting key components including Solid Aluminum Platter, Regrind Silicone Pad, Anti-Skating Control, Replaceable Audio Technica Cartridge, Headphone Jack, and 33/45 RPM speed selector.

Imatge: Part posterior view showing the RCA (Phono/Line) output, Built-in Pre-Amp switch, USB to PC Recording port, and the Rewind Fabric material.

Guia de configuració

1. Desembalatge i col·locació: Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.
2. Platter and Belt Installation:
   • Place the aluminum platter onto the center spindle.
   • Locate the small rubber drive belt. If it's around the center of the underside of the platter, gently stretch it around the gold motor spindle located on the turntable base. Ensure it is seated correctly.
   • Place the Regrind Silicone Slip Mat on top of the platter.
3. Counterweight Installation: Slide the counterweight onto the rear of the tonearm. Rotate it clockwise until it is approximately in the middle of the tonearm.
4. Ajust de la força de seguiment:
   • Carefully remove the stylus protector.
   • Lower the tonearm lift lever.
   • Balance the tonearm by rotating the counterweight until the tonearm floats freely and is parallel to the platter.
   • Once balanced, hold the counterweight steady and rotate the numbered ring to '0'.
   • Rotate the entire counterweight (including the numbered ring) counter-clockwise to the recommended tracking force for the Audio Technica AT3600L cartridge, which is typically 3.5 grams.
5. Ajust antipatinatge: Set the anti-skate dial to the same value as your tracking force (e.g., 3.5). This helps prevent the stylus from skipping inwards.
6. Connexió d'àudio:
   • Sortida RCA: Connect the included RCA cable from the turntable's 'OUT PUT' jacks to your amplifier o altaveus alimentats.
   • pre-Amp Canvi: Si es connecta a un amplifier with a dedicated 'PHONO' input, set the 'PRE-AMP' switch on the back of the turntable to 'OFF'. If connecting to an 'AUX' or 'LINE' input, set the 'PRE-AMP' switch to 'ON'.
7. Connexió d'alimentació: Connect the power adapter to the '12V DC' input on the back of the turntable and plug it into a wall outlet.

Instruccions de funcionament

Reproducció d’un disc

1. Col·loca un disc de vinil al plat.
2. Seleccioneu la velocitat adequada (33 o 45 RPM) amb el selector de velocitat. Feu servir l'adaptador de 45 RPM per a peces individuals si cal.
3. Aixequeu el braç amb la palanca d'elevació del braç.
4. Col·loqueu manualment el braç sobre el solc inicial desitjat del disc.
5. Gently lower the tonearm using the lift lever. The stylus will make contact with the record and playback will begin.
6. At the end of the record, the turntable will automatically stop spinning. Lift the tonearm and return it to its rest.

Emparellament Bluetooth

1. Ensure your Bluetooth speaker or headphones are in pairing mode.
2. Enceneu el plat giratori.
3. Press the Bluetooth button on the turntable to activate Bluetooth mode. The indicator light will flash.
4. Press the Bluetooth button again to initiate pairing. The turntable will search for nearby Bluetooth devices.
5. Un cop connectat, l'indicador lluminós del Bluetooth s'il·luminarà fixament.

Ús de la presa per a auriculars

Plug your headphones into the 3.5mm headphone jack located on the front of the turntable for private listening.

Gravació d'USB a PC

Connect the turntable to your computer using the USB cable. Use appropriate recording software (not included) to digitize your vinyl collection.

Cura i Manteniment

• Neteja: Use a soft, dry cloth to clean the turntable's surface. For the bamboo plinth, a slightly damp es pot fer servir un drap, seguit d'un de sec. Eviteu productes químics agressius.
• Cura del stylus: Gently clean the stylus regularly with a soft brush designed for stylus cleaning, brushing from back to front. Avoid touching the stylus with your fingers.
• Funda antipols: Use the included Rewind Fabric Dust Cover to protect the turntable from dust when not in use.
• Substitució del cinturó: The drive belt may need replacement over time. Refer to the setup guide for re-installation instructions with a new belt.

Resolució de problemes

Especificacions

• Dimensions del producte: 15.74 x 15.74 x 3.15 polzades
• Pes de l'article: 12.13 lliures
• Número de model: EM-JT002-BK
• Marca: Marley
• Velocitat de rotació màxima: 45 RPM (admet 33 1/3 i 45 RPM)
• Característiques especials: Pre-incorporatAmp, RCA Output, USB Recording, Bluetooth Connectivity
• Material: Wood (Natural Bamboo), Aluminum, REGRIND Silicone, REWIND Fabric
• Color: Signature Black
• Dispositius compatibles: Speakers, Bluetooth Audio Devices
• Cartutx: Replaceable Audio Technica AT3600L MM cartridge

Sustainability and Materials

The House of Marley Stir It Up Wireless Turntable is designed with a commitment to sustainability, incorporating mindfully sourced materials to minimize environmental impact.

Image: Close-up of the natural bamboo material used in the plinth, highlighting its sustainable origin.

• Natural Bamboo: The plinth is crafted from solid bamboo, a rapidly renewable resource.
• REGRIND Silicone: The slip mat is made from REGRIND silicone, utilizing recycled silicone waste.
• REWIND Fabric: The dust cover and other fabric elements are made from REWIND fabric, a blend of recycled materials including organic cotton, hemp, and recycled PET.
• Recycled Aluminum: The platter is made from recycled aluminum.

House of Marley's commitment extends to global reforestation and ocean conservation through partnerships with organizations like One Tree Planted and the Surfrider Foundation.

Garantia i Suport

This product comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official House of Marley weblloc.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact House of Marley customer service through their official weblloc web o la informació de contacte que es proporciona a l'embalatge del producte.

També podeu visitar el Botiga Marley a Amazon per obtenir informació addicional sobre el producte i recursos d'assistència.