Manual d'usuari del punt d'accés WLAN industrial Moxa AWK-3131A-US

1. Introducció

This manual provides comprehensive instructions for the installation, configuration, operation, and maintenance of the Moxa AWK-3131A-US Industrial 802.11a/b/g/n WLAN Access Point. The AWK-3131A-US is designed for reliable wireless communication in demanding industrial environments, functioning as an Access Point, Bridge, or Client.

Key features of the AWK-3131A-US include:

• Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client support
• Easy setup and deployment with AeroMag technology
• Millisecond-level Client-based Turbo Roaming for seamless connectivity
• Complete redundancy with AeroLink Protection
• Integrated antenna and power isolation
• Support for 5 GHz DFS channels
• Wide operating temperature range of -25 to 60°C

2. Informació de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans d'instal·lar o fer funcionar el dispositiu. Si no ho feu, podeu patir lesions o danys a l'equip.

• Font d'alimentació: Ensure the power source meets the device's voltage and current requirements. Disconnect power before performing any maintenance.
• Medi ambient: Install the device in an environment within its specified operating temperature and humidity ranges. Avoid exposure to excessive moisture, dust, or direct sunlight.
• Posada a terra: Proper grounding is essential for safe operation and protection against electrical surges.
• Antenes: Use only approved antennas with the device. Do not operate the device without antennas connected.
• Personal qualificat: La instal·lació i el manteniment només els ha de dur a terme personal qualificat.

3. Contingut del paquet

Comproveu que el vostre paquet contingui els elements següents:

• Moxa AWK-3131A-US Industrial WLAN Access Point unit
• Two detachable antennas
• Documentació (Guia d'instal·lació ràpida, Targeta de garantia)
• Bloc de terminals per a l'entrada de potència

Si falta algun article o està malmès, poseu-vos en contacte amb el vostre proveïdor immediatament.

4. Producte acabatview

The AWK-3131A-US is a robust industrial wireless device. Below is an illustration of the unit with its key components and indicators.

Figura 1: Moxa AWK-3131A-US Industrial WLAN Access Point. The device features LED indicators for power, PoE, fault, state, signal strength, WLAN activity, and LAN activity. It includes two RJ45 LAN ports, an RS-232 console port, and two antenna connectors. Two external antennas are shown alongside the main unit.

4.1 Indicadors LED

4.2 Ports i connectors

• Entrada d'alimentació: Terminal block for redundant DC power inputs (PWR1, PWR2) and PoE.
• Antenna Connectors (A & B): RP-SMA connectors for external antennas.
• Ports LAN (RJ45): Two 10/100/1000BaseT(X) Ethernet ports for network connectivity.
• RS-232 Console Port: For local management and configuration via a serial connection.

5. Configuració i instal·lació

5.1 Muntatge del dispositiu

The AWK-3131A-US supports DIN-rail mounting. Ensure the mounting surface is stable and provides adequate ventilation.

1. Attach the DIN-rail kit to the rear panel of the device using the provided screws.
2. Hook the top of the DIN-rail clip onto the DIN rail.
3. Push the bottom of the device towards the DIN rail until it snaps into place.

5.2 Instal·lació de l'antena

Carefully screw the two provided antennas onto the RP-SMA connectors labeled 'A' and 'B' on the front panel. Ensure they are finger-tight but do not overtighten.

5.3 Connexió d'alimentació

The device supports redundant DC power input and Power over Ethernet (PoE).

• Potència CC: Connect a compatible DC power supply to the terminal block. The device supports dual power inputs (PWR1 and PWR2) for redundancy.
• PoE: If using PoE, connect a PoE-enabled Ethernet cable to one of the LAN ports. Ensure the PoE source meets the device's power requirements.

After connecting power, the PWR1/PWR2 or PoE LED should illuminate green.

5.4 Connexió de xarxa

Connect Ethernet cables from your network devices (e.g., switches, computers) to the LAN ports on the AWK-3131A-US.

5.5 Configuració inicial

El dispositiu es pot configurar mitjançant a web browser or the RS-232 console port.

• WebGestió basada en:
  1. Connect your computer to a LAN port of the AWK-3131A-US.
  2. Configure your computer's IP address to be in the same subnet as the device's default IP (e.g., 192.168.1.x).
  3. Obre a web browser and enter the device's default IP address (refer to the Quick Installation Guide for the default IP).
  4. Inicieu sessió amb el nom d'usuari i la contrasenya predeterminats.
• Console Management:
  1. Connect a serial cable from your computer to the RS-232 console port.
  2. Use a terminal emulation program (e.g., PuTTY) with appropriate serial settings (e.g., 115200 bps, 8 data bits, no parity, 1 stop bit, no flow control).
  3. Inicieu sessió amb el nom d'usuari i la contrasenya predeterminats.

It is highly recommended to change the default login credentials immediately after initial access.

6. Funcionament del dispositiu

The AWK-3131A-US can operate in various modes to suit different network requirements.

6.1 Modes de funcionament

• Mode de punt d'accés (AP): Functions as a central hub for wireless clients to connect to the wired network.
• Mode pont: Connects two wired networks wirelessly, acting as a transparent bridge.
• Mode client: Allows the device to connect to an existing Access Point, extending wireless connectivity to wired devices connected to its LAN ports.

Select the desired operating mode through the web-based management interface under the "Wireless Settings" or "Operation Mode" section.

6.2 Configuració sense fil

Configure wireless parameters such as SSID, security (WPA2/WPA3), channel, and transmit power. Ensure that the wireless settings are compatible with your client devices or other wireless infrastructure.

• SSID: Set a unique name for your wireless network.
• Seguretat: Enable strong encryption (e.g., WPA2-PSK, WPA2-Enterprise) to protect your wireless network.
• Canal: For optimal performance, select a clear channel, especially in congested environments. The device supports 5 GHz DFS channels.

6.3 Funcions avançades

• AeroMag: Simplifies the deployment and configuration of multiple Moxa wireless devices. Refer to the dedicated AeroMag documentation for detailed instructions.
• Turbo Roaming: Provides fast roaming capabilities for wireless clients, ensuring seamless connectivity during movement. Configure roaming parameters in client mode.
• AeroLink Protection: Enhances network redundancy by providing backup wireless links.
• Traducció d'adreces de xarxa (NAT): Configure NAT settings to allow multiple devices on a private network to share a single public IP address.

7. Manteniment

7.1 Neteja

Ensure the device is powered off and disconnected from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior of the device. Do not use liquid or aerosol cleaners.

7.2 actualitzacions de microprogramari

Periodically check the Moxa weblloc web per obtenir les darreres actualitzacions de firmware. Les actualitzacions de firmware poden proporcionar noves funcions, millores de rendiment i millores de seguretat.

1. Baixeu l'últim firmware file from the official Moxa support weblloc.
2. Accedir al dispositiu webinterfície de gestió basada en
3. Navigate to the "System Maintenance" or "Firmware Upgrade" section.
4. Follow the on-screen instructions to upload and install the new firmware. Do not power off the device during the update process.

8. Solució De Problemes

This section provides solutions to common issues you may encounter with the AWK-3131A-US.

8.1 Problemes d'energia

• Sense LED d'alimentació:
  • Check power cable connections to the terminal block or PoE source.
  • Verify the power supply is functioning correctly and providing the correct voltage.

8.2 Problemes de connectivitat de xarxa

• No LAN Link:
  • Ensure Ethernet cables are securely connected.
  • Check the status of the connected network device (switch/router).
  • Verify cable integrity.
• No WLAN Connection:
  • Check if antennas are properly installed.
  • Verify WLAN settings (SSID, security key) on both the AP and client devices.
  • Check the SIGNAL LED for wireless signal strength.
  • Ensure the device is in the correct operating mode (AP, Bridge, Client).

8.3 Device Unresponsive

• No es pot accedir Web Interfície:
  • Verify your computer's IP address is in the same subnet as the device.
  • Try accessing via the console port.
  • Perform a factory reset if all else fails (refer to the device's advanced manual for reset procedures).

9. Especificacions

Technical specifications for the Moxa AWK-3131A-US.

10. Garantia i Suport

Moxa products are backed by a standard warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa weblloc.

For technical support, product documentation, and software downloads, please visit the Moxa support portal:

https://www.moxa.com/support

You may also contact Moxa customer service directly for assistance.