VEVA ProHEPA 9000 Air Purifier Instruction Manual

1. Introducció

This manual provides instructions for the safe and efficient operation of your VEVA ProHEPA 9000 Air Purifier. Please read this manual thoroughly before use and retain it for future reference. The VEVA ProHEPA 9000 is designed to improve indoor air quality by capturing airborne particles and reducing odors.

Image 1: The VEVA ProHEPA 9000 Air Purifier in a modern home environment.

2. Característiques clau

• Advanced 4-in-1 Filtration System: Includes a washable pre-filter, micro-particle and activated carbon filter, and an H13 premium HEPA filter.
• Medical-Grade Air Purification: Captures tiny unwanted particles, allergens, smoke, dust, pet dander, and odors.
• Ozone-Free Operation: Does not produce trace amounts of ozone, ensuring a safe environment.
• Múltiples velocitats del ventilador: Offers 3 dynamic air speeds, from extra quiet for peaceful purification to ultra turbo for maximum purification.
• Cobertura de l'habitació gran: Effectively purifies air in spaces up to 600 sq ft.
• Disseny elegant i elegant: Modern aesthetic that blends seamlessly with home or office decor.

Image 2: Illustration of the 4-in-1 filtration technology, highlighting the washable pre-filter, micro-particle & activated carbon filter, and H13 premium HEPA filter.

3. Instruccions de configuració

Before initial use, ensure all filters are removed from their protective plastic bags. Failure to do so will prevent the unit from operating correctly and may cause damage.

1. Desempaquetar la unitat: Traieu amb cura el purificador d'aire del seu embalatge.
2. Accés al compartiment del filtre: The front panel of the air purifier can be easily removed to access the filter compartment. Gently pull the bottom edge of the front panel to detach it.
3. Remove Filters from Packaging: Locate the pre-filter, activated carbon filter, and HEPA filter. Each filter is individually sealed in a plastic bag. Remove all filters from their protective plastic packaging.
4. Instal·lar filtres: Insert the filters back into the unit in the correct order. Typically, the pre-filter goes in first, followed by the activated carbon filter, and then the HEPA filter. Ensure they are seated properly.
5. Replace Front Panel: Reattach the front panel by aligning it with the unit and gently pushing until it clicks into place.
6. Posicioneu la unitat: Place the air purifier on a flat, stable surface in the desired room, ensuring adequate space around the air intake and outlet for optimal air circulation.
7. Connectar: Connecteu el cable d'alimentació a una presa de corrent adequada.

4. Instruccions de funcionament

The VEVA ProHEPA 9000 features simple controls located on the top panel of the unit.

1. Encès/apagat: Premeu el botó d'engegada (⏻) per encendre o apagar la unitat.
2. Ajustar la velocitat del ventilador: The unit offers three fan speed settings (1, 2, 3). Press the fan speed button to cycle through the settings.
   • Speed 1 (Quiet): Ideal for continuous operation in quiet environments like bedrooms.
   • Velocitat 2 (Mitjana): Suitable for general air purification and moderate air quality issues.
   • Velocitat 3 (Turbo): Provides maximum air circulation and purification for rapid air cleaning.
3. Llum indicadora del filtre: A dedicated indicator light will illuminate when it's time to check or replace the filters. Refer to the Maintenance section for details.

5. Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del purificador d'aire.

5.1 Filter Cleaning and Replacement Schedule

• Prefiltre rentable: This filter can be rinsed with water and air-dried. Clean regularly, especially if you notice reduced airflow or increased dust accumulation.
• Activated Carbon Filter & H13 HEPA Filter: These filters are not washable and should be replaced every 2-6 months, depending on usage and air quality. The filter indicator light will signal when replacement is needed.

5.2 How to Clean/Replace Filters

1. Apagueu i desconnecteu: Apagueu i desendolleu sempre el purificador d'aire abans de fer-ne cap manteniment.
2. Treure el panell frontal: Gently pull the bottom edge of the front panel to detach it.
3. Elimina els filtres: Carefully pull out the old filters. Dispose of non-washable filters responsibly.
4. Clean Pre-Filter (if applicable): Rinse the washable pre-filter under lukewarm water until clean. Allow it to air dry completely before reinstallation.
5. Install New/Clean Filters: Insert the clean pre-filter and new activated carbon and HEPA filters (if replacing) into the unit, ensuring correct orientation.
6. Replace Front Panel: Torneu a col·locar el panell frontal.
7. Restableix l'indicador del filtre: After replacing filters, press and hold the filter reset button (often indicated by a filter icon) for 3-5 seconds until the light turns off.

Vídeo 5: Una breu introduccióview demonstrating the filter replacement process. Note: This is a short preview vídeo.

Image 3: A user replacing the filters in the VEVA ProHEPA 9000 Air Purifier.

6. Solució De Problemes

7. Especificacions

• Número de model: C102
• Dimensions del producte: 8.3 "P x 12.6" W x 20.6" H
• Pes de l'article: 3.33 quilograms (7.34 lliures)
• Color: Blanc
• Font d'alimentació: Elèctric amb cable
• Tipus de filtre: H13 HEPA, Activated Carbon, Washable Pre-filter

Image 4: Detailed dimensions of the VEVA ProHEPA 9000 Air Purifier.

8. Garantia i assistència

For complete access to video tutorials, warranty registration, and support, please visit the official VEVA weblloc.

• Oficial Weblloc: www.vevafilters.com
• Correu electrònic de suport: support@vevafilters.com