1. Introducció
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your MICHELIN 4X4/SUV Digital Tyre Inflator, Model 12310. Please read these instructions thoroughly before first use and retain for future reference. This device is designed for inflating vehicle tyres and other inflatable items requiring specific pressure.
2. Informació de seguretat
- Always ensure the vehicle engine is running when using the inflator to prevent draining the vehicle battery.
- No deixeu l'inflador sense vigilància durant el funcionament.
- Avoid prolonged continuous use. Allow the unit to cool down after 10-15 minutes of continuous operation to prevent overheating.
- Mantenir fora de l'abast dels nens.
- No feu servir l'inflador en condicions humides ni a prop de líquids o gasos inflamables.
- Always check the recommended tyre pressure for your vehicle, typically found in the vehicle's owner's manual or on a sticker inside the driver's door jamb.
- Assegureu-vos que totes les connexions estiguin segures abans d'operar.
3. Contingut del paquet
Desembaleu amb cura tots els articles i assegureu-vos que heu rebut el següent:
- MICHELIN 4X4/SUV Digital Tyre Inflator (Model 12310)
- High-pressure air hose with screw-on valve connector
- 12V DC power cable with car accessory socket plug
- Adaptor kit (e.g., ball needle, raft/toy adaptor)
- Storage bag (may vary by region)
Figure 3.1: The MICHELIN 4X4/SUV Digital Tyre Inflator shown with its standard accessories, including the air hose, power cable, various adaptors, and a storage bag.
4. Producte acabatview
The MICHELIN 4X4/SUV Digital Tyre Inflator is a robust and efficient device designed for quick and accurate tyre inflation. It features a digital display for precise pressure readings and controls for ease of use.
Figura 4.1: Frontal view of the inflator, highlighting its compact design and integrated handle.
Figura 4.2: Detallada view of the digital display and control panel, showing buttons for power, unit selection, and pressure adjustment.
5. Configuració
- Connexió d'alimentació: Insert the 12V DC power cable plug firmly into your vehicle's 12V accessory socket. Ensure the vehicle engine is running to provide adequate power and prevent battery drain.
- Connexió de la mànega: Connect the high-pressure air hose to the inflator's air outlet port. Ensure it is securely tightened.
- Tyre Valve Connection: Remove the dust cap from the tyre valve. Screw the inflator's valve connector onto the tyre valve stem until it is finger-tight. Do not overtighten.
6. Instruccions de funcionament
- Encès: Press the power button on the inflator. The digital display will illuminate, showing the current tyre pressure.
- Selecciona la unitat de pressió: Use the 'UNIT' button to cycle through available pressure units (e.g., PSI, BAR, KPA) until your desired unit is displayed.
- Establir la pressió objectiu: Use the '+' and '-' buttons to adjust the target pressure to your vehicle's recommended level.
- Inici de la inflació: Press the 'START' button (or equivalent power/play button, refer to Figure 4.2 for specific button layout) to begin inflation. The inflator will automatically stop once the preset pressure is reached.
- Supervisar el progrés: Observe the digital display to monitor the pressure increase.
- Desconnectar: Once inflation is complete and the inflator has stopped, unscrew the valve connector from the tyre valve stem. Replace the tyre valve dust cap. Disconnect the 12V power cable from the vehicle's accessory socket.
Figure 6.1: The inflator in use, connected to a vehicle tyre. Ensure the hose is securely attached to the valve stem.
6.1 Using Adaptors
For inflating items like sports balls or inflatable toys, select the appropriate adaptor from the kit. Screw the adaptor onto the tyre valve connector, then attach it to the item to be inflated. Follow the same inflation steps, ensuring not to overinflate.
7. Manteniment
- Neteja: Netegeu l'exterior de l'inflador amb anunciamp drap. No utilitzeu productes químics agressius ni netejadors abrasius. Assegureu-vos que la unitat estigui seca abans de guardar-la.
- Emmagatzematge: Store the inflator and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag to keep components organized and protected.
- Cable and Hose Inspection: Periodically inspect the power cable and air hose for any signs of damage, cracks, or fraying. Do not use the inflator if any damage is present.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Inflator does not power on. | No power from 12V socket; vehicle engine off; blown fuse in vehicle or inflator plug. | Ensure vehicle engine is running. Check 12V socket for power. Inspect and replace fuse if necessary. |
| El inflador funciona però no s'infla. | Air hose not securely connected; tyre valve connector not fully screwed on; leak in hose or valve. | Tighten all connections. Check hose and valve for damage. |
| L'inflador s'atura prematurament. | Overheating due to prolonged use; target pressure reached. | Allow unit to cool down for 15-20 minutes. Verify target pressure setting. |
| Lectura de pressió inexacta. | Loose connection; unit calibration issue. | Ensure connections are tight. Compare reading with a known accurate gauge. If persistent, contact support. |
9. Especificacions
- Model: 12310
- Marca: MICHELIN
- Fabricant: Michelin
- Dimensions del producte: 13.5 x 10.2 x 24.7 cm
- Pes de l'article: 1.6 kg
- Voltage: 12 Volts DC
- Bateries: 2 Lithium Metal batteries (included, likely for digital display/preset memory)
- Muntatge requerit: No
10. Garantia i Suport
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official MICHELIN automotive accessories weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
