1. Introducció
Gràcies per la compraasing the BeamZ LF1500 Professional Heavy Fog Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before first use and keep it for future reference.
Producte acabatview
The BeamZ LF1500 is a professional heavy fog machine designed to produce ground-hugging fog effects without the need for dry ice. It utilizes advanced ultrasonic technology to create a dense, low-lying fog using standard fog fluid and water. Its robust flight case with wheels ensures easy transport and protection, making it ideal for various events and professional applications.
Figure 1: BeamZ LF1500 Heavy Fog Machine with its flexible fog output hose and nozzle.
2. Instruccions de seguretat
Observeu sempre les següents precaucions de seguretat per evitar descàrregues elèctriques, incendis o lesions:
- Ensure the unit is connected to a grounded power outlet (230Vac / 50Hz).
- No feu funcionar la màquina si el cable d'alimentació està danyat.
- Keep the machine away from flammable materials.
- Use only BeamZ approved fog fluid and demineralized water.
- Do not touch hot surfaces during or immediately after operation.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la màquina.
- No submergiu la unitat en aigua ni altres líquids.
- Mantenir fora de l'abast dels nens.
- Desconnecteu de l'alimentació abans de netejar o fer el manteniment.
3. Configuració
- Desembalatge: Traieu amb cura la màquina del seu embalatge. Inspeccioneu-la per si hi ha hagut danys durant el transport.
- Col·locació: Place the machine on a stable, level surface. Ensure there is sufficient space around the unit for ventilation.
- Ompliment de fluids:
- Open the fluid reservoir cap.
- Fill the 5-liter reservoir with a mixture of BeamZ standard fog fluid and demineralized water. Refer to the fog fluid instructions for recommended ratios.
- Securely close the reservoir cap.
- Connexió de la mànega: Attach the flexible fog output hose to the designated port on the machine. Ensure it is securely fastened to prevent leaks.
- Connexió d'alimentació: Connect the power cable to a suitable 230Vac / 50Hz grounded power outlet.
4. Instruccions de funcionament
Initial Power-On and Warm-up
Once connected to power, the machine will automatically begin its warm-up cycle. The warm-up time is approximately 8 minutes. The display will indicate when the machine is ready for operation.
Modes de control
The BeamZ LF1500 can be controlled via DMX or manually.
Funcionament manual
Use the integrated digital display and control buttons to adjust settings directly on the unit. You can control:
- Sortida de boira: Adjust the intensity of the fog production.
- Velocitat del ventilador: Control the speed of the internal fan, which affects the spread and density of the fog.
- Continuous Fog: The machine supports continuous fog output once warmed up.
Operació DMX
For advanced control and integration into lighting setups, connect a DMX controller to the 3-pin XLR DMX input/output ports. The machine supports 1 or 2 DMX channels. Refer to the DMX chart below for channel assignments and values.
| Canal | Funció | Interval de valors | Descripció |
|---|---|---|---|
| 1 | Sortida de boira | 0-255 | 0 = Off, 1-255 = Fog output intensity (0-100%) |
| 2 | Velocitat del ventilador | 0-255 | 0 = Off, 1-255 = Fan speed (0-100%) |
5. Manteniment
Regular maintenance ensures the longevity and optimal performance of your BeamZ LF1500.
- Reemplaçament de fluids: Always use fresh, clean fog fluid and demineralized water. Do not mix different types of fluid.
- Neteja:
- Periodically clean the exterior of the machine with a soft, dry cloth.
- Ensure the air vents are free from dust and debris to prevent overheating.
- If the machine is stored for extended periods, it is recommended to run a cleaning solution (distilled water) through the system to prevent clogs.
- Emmagatzematge: Store the machine in a cool, dry place. If storing for a long time, empty the fluid reservoir.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de boira |
|
|
| Sortida de boira feble |
|
|
| La màquina no s'encén |
|
|
If problems persist after attempting these solutions, please contact BeamZ customer support or a qualified service technician.
7. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | LF1500 (160.748) |
| Font d'alimentació | 230Vac / 50Hz |
| Temps d'escalfament | Aprox. 8 minuts |
| Capacitat del dipòsit de fluids | 5 litres |
| Modes de control | DMX, manual |
| Canals DMX | 1 o 2 |
| Connexió DMX | XLR de 3 pins |
| Dimensions (L x A x A) | 630 x 350 x 480 mm |
| Pes | 25.6 kg |
| Tecnologia | Ultrasonic (no dry ice required) |
| Sortida contínua | Sí |
8. Garantia i Suport
Information regarding warranty coverage and customer support for the BeamZ LF1500 is typically provided with your purchase documentation or can be found on the official BeamZ weblloc web. Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.
For technical assistance, spare parts, or service inquiries, please contact your local BeamZ distributor or visit the official BeamZ weblloc per obtenir informació de contacte.
Botiga oficial de la marca: BeamZ Amazon Store
9. Media Resources
Below are relevant media resources for the BeamZ LF1500.
Imatges del producte
The BeamZ LF1500 Professional Heavy Fog Machine, showcasing its compact design within a flight case and the flexible output hose for directing fog.
Vídeos oficials de productes
No s'han trobat vídeos oficials de productes del venedor a les dades proporcionades.
