1. Introducció
The APC Smart-UPS 500VA Lithium Ion UPS is designed to provide reliable power protection for networking equipment and point-of-sale (POS) devices. This Uninterruptible Power Supply (UPS) offers network-grade protection, hot-swappable batteries, and built-in data line protection to ensure continuous power and increased availability for your critical applications.
Característiques principals:
- 500VA / 400W Sine Wave UPS battery backup for clean and consistent power.
- LED display provides clear indications for Online/On Battery status, SmartConnect status, Network status, Event Detected, and Replace Battery alerts.
- Input: NEMA 5-15P; Output: (4) NEMA 5-15R Nominal Input/Output Voltage: 120V. Cable Length: 6 ft.
- APC SmartConnect offers remote monitoring via a secure portal, providing automatic notifications, firmware updates, and advanced support services. A 6-month free trial of SmartConnect is available for units purchased and/or registered after August 1, 2023.
- 1U Rackmount UPS design, including rack mounting support rails for flexible installation.
Figura 1: Frontal view of the APC Smart-UPS 500VA Lithium Ion UPS.
2. Configuració i instal·lació
2.1 Desembalatge i inspecció
Carefully unpack the UPS and inspect it for any shipping damage. Retain the packaging for future use. Ensure all components listed in the packing list are present.
2.2 Col·locació
The Smart-UPS SCL500RM1UC is a 1U rackmount unit. It is suitable for short-depth and standard wall mount racks or IT racks. Ensure adequate ventilation around the unit.
Figura 2: Angle view of the UPS, demonstrating its compact rackmount design.
2.3 Muntatge en bastidor
Utilize the included rack mounting support rails to securely install the UPS into a standard 19-inch rack. Follow the instructions provided with the rail kit for proper installation.
2.4 Connexió a l'alimentació i als dispositius
Connect the UPS to a grounded electrical outlet using the integrated NEMA 5-15P input plug. Connect your critical equipment to the four NEMA 5-15R output receptacles on the rear of the UPS. Ensure total load does not exceed 400W.
Figura 3: posterior view of the UPS, highlighting the NEMA 5-15R output receptacles and NEMA 5-15P input.
2.5 Càrrega inicial de la bateria
Allow the UPS to charge for at least 24 hours before initial use to ensure full battery capacity. The battery charges whenever the UPS is connected to AC power.
3. Funcionament del SAI
3.1 Engegada/apagada
To power on the UPS, press the power button on the front panel. To power off, press and hold the power button until the unit shuts down.
3.2 Indicadors LED
The front LED display provides real-time status information:
- Online/On Battery: Indicates whether the UPS is operating on utility power or battery power.
- SmartConnect Status: Shows the status of the remote monitoring connection.
- Estat de la xarxa: Indica la connectivitat de xarxa.
- Event Detected: Alerts to specific events or issues.
- Substituïu la bateria: S'il·lumina quan cal substituir la bateria.
3.3 Monitorització remota SmartConnect
The APC SmartConnect feature allows for remote monitoring of your UPS. Connect the UPS to your network via the dedicated SmartConnect port. Register your device through the secure portal to receive automatic notifications, firmware updates, and access advanced support services. For detailed setup, refer to the SmartConnect documentation available on the APC weblloc.
3.4 PowerChute Software
For enhanced management and graceful shutdown capabilities, download and install the APC PowerChute Software Business Edition. This software provides additional control and monitoring features for your UPS and connected devices.
4. Manteniment
4.1 Cura i substitució de la bateria
The Smart-UPS SCL500RM1UC utilizes Lithium Ion batteries, which offer a longer lifespan compared to traditional lead-acid batteries. The UPS features hot-swappable batteries, allowing for replacement without powering down connected equipment. When the "Replace Battery" LED illuminates, it indicates that the battery needs to be replaced. Contact APC support or an authorized service provider for genuine replacement batteries.
The UPS and its battery are covered by a 5-year warranty.
4.2 Neteja general
Keep the UPS clean and free from dust. Use a dry cloth to wipe down the exterior. Do not use liquid cleaners or solvents.
5. Solució De Problemes
This section provides solutions to common issues you might encounter with your APC Smart-UPS. For more detailed troubleshooting, refer to the comprehensive user guide available on the APC weblloc.
| Problema | Causa possible | Solució |
|---|---|---|
| El SAI no s'encén. | Not connected to AC power; Battery not connected or discharged. | Ensure the UPS is securely plugged into a live, grounded outlet. Allow the battery to charge for 24 hours. Verify battery connections. |
| El SAI emet un so continu. | On battery power; Overload condition. | Això és normal durant un tall de correnttage. If not a power outage, reduce the load on the UPS. |
| "Replace Battery" LED is lit. | Bateria a punt d'arribar al final de la seva vida útil. | Replace the battery. Contact APC support for genuine replacement options. |
| SmartConnect not connecting. | Network issue; Incorrect registration. | Check network cable and connectivity. Ensure proper registration on the SmartConnect portal. |
If the problem persists after attempting these solutions, please contact APC Technical Support.
6. Especificacions
| Atribut | Valor |
|---|---|
| Marca | APC |
| Número de model | SCL500RM1UC |
| Capacitat | 500 VA / 400 W |
| Entrada Voltage | 120 V |
| Vol. De sortidatage | 120 V |
| Connexió d'entrada | NEMA 5-15P |
| Connexions de sortida | (4) NEMA 5-15R |
| Tipus de bateria | Lithium Ion (4 Lithium Polymer batteries included) |
| Dimensions del producte (P x A x A) | 9.13 x 17.01 x 1.73 polzades (9.13" de profunditat x 17.01" d'amplada x 1.73" d'alçada) |
| Pes de l'article | 9.26 lliures |
| Factor de forma | Muntatge en rack 1U |
| Primera data disponible | 8 de juliol de 2019 |
7. Garantia i Suport
7.1 Garantia del producte
The APC Smart-UPS SCL500RM1UC comes with a 5-year warranty covering both the UPS unit and its internal Lithium Ion battery. Please retain your proof of purchase for warranty claims.
7.2 Suport tècnic
For technical assistance, troubleshooting, or warranty inquiries, please visit the official APC by Schneider Electric website or contact their customer support. You can also refer to the comprehensive Guia de l'usuari (PDF) per a informació detallada.
For SmartConnect related support, utilize the secure portal for notifications and advanced services. Remember, the SmartConnect feature is offered as a 6-month free trial for units purchased and/or registered after August 1, 2023.
