Neoteck Multimeter Carrying Case with Customizable Foam Insert User Manual

Introducció

Thank you for choosing the Neoteck Multimeter Carrying Case. This protective case is designed to safely store and transport your digital multimeter and its accessories. Featuring a durable exterior and a customizable foam interior, it offers excellent protection against impacts, scratches, and splashes. This manual provides detailed instructions on how to set up and use your carrying case effectively.

Característiques del producte

• Àmplia compatibilitat: Designed to fit various digital multimeters, including Fluke 117/115/116/114/113 87V 88V F15B+ F17B+ F18B+, F117C/F17B+/F115C, and many models from AstroAI, Crenova, Etekcity, KAIWEETS, INNOVA, Klein, and Tacklife.
• Customizable Foam Insert: The interior features removable foam layers, allowing you to create a custom-fit compartment for your specific multimeter model and accessories.
• Mesh Storage Pocket: A secondary mesh pocket is integrated into the lid for convenient storage of test leads, batteries, temperature probes, and other small tools.
• Construcció duradora: Constructed from high-density EVA, nylon, and PU materials, providing crush-resistant, shockproof, and water-resistant protection.
• Dimensions compactes:
  • Exterior Dimensions: 22.9 x 14 x 7.9 cm (9.0 x 5.5 x 3.1 inches)
  • Interior Dimensions: 19.8 x 11.4 x 6.3 cm (7.8 x 4.5 x 2.5 inches)

Image: Key features of the Neoteck Multimeter Carrying Case, highlighting the smooth zipper, soft interior lining, and waterproof nylon exterior.

Setup: Customizing the Foam Insert

The Neoteck Multimeter Carrying Case features a unique DIY foam insert that allows you to create a perfect fit for your specific multimeter. Follow these steps to customize the interior:

1. Assess Your Multimeter: Place your multimeter on the foam insert to determine the required shape and depth.
2. Identify Foam Layers: The foam insert consists of pre-cut layers. Carefully identify which layers need to be removed to accommodate your device.
3. Remove Foam Sections: Gently peel or cut out the foam sections corresponding to the shape of your multimeter. Start with the top layers and work downwards until your device fits snugly without excessive pressure.
4. Prova d'ajust: Place your multimeter into the customized foam. Ensure it is secure and does not move excessively when the case is closed. Adjust by removing more foam if necessary.

Image: Illustration of the DIY sponge cutouts, demonstrating how to remove sections to fit your multimeter.

Imatge: Examples showing how different multimeters (Fluke 115, 117, 15B+, 17B+, 87V) fit into the case after removing specific foam layers.

Instruccions de funcionament

1. Insert Multimeter: After customizing the foam, carefully place your digital multimeter into the main compartment.
2. Accessoris de la botiga: Utilize the mesh pocket in the lid to store smaller accessories such as test leads, probes, and spare batteries.
3. Tancament segur: Ensure the zipper is fully closed to provide maximum protection for your device.
4. Transport: Use the integrated handle for easy and secure transportation of your multimeter.

Image: The open carrying case, illustrating the main compartment with foam and the mesh pocket in the lid for accessories.

Manteniment

• Neteja: Netegeu l'exterior de la carcassa amb anunciamp drap i sabó suau si cal. Eviteu productes químics agressius.
• Assecat: Allow the case to air dry completely before storing any electronic devices inside.
• Cura de l'escuma: The foam insert can be gently cleaned with a soft, dry brush to remove dust or debris.
• Emmagatzematge: Guardeu la funda en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes quan no la feu servir.

Image: The case being splashed with water, illustrating its water-resistant properties due to EVA and 1680D material construction.

Resolució de problemes

Multimeter does not fit:

Ensure you have removed enough foam layers from the customizable insert. The foam is designed to be removed incrementally to achieve a snug fit. Refer to the "Setup" section for detailed instructions on customizing the foam.

Case feels too tight or too loose:

If too tight, remove additional foam sections. If too loose, consider adding back some removed foam pieces or using additional padding (not included) to secure your device. The goal is a snug fit that prevents movement during transport.

Especificacions

Garantia i Suport

Information regarding specific warranty terms and conditions for this product was not available in the provided data. For warranty claims, technical support, or any product-related inquiries, please contact Neoteck customer service directly through their official weblloc web o el venedor on es va comprar el producte.

You can visit the Neoteck store for more information: Neoteck Store