Manual d'instruccions del provador digital de bateries i alternadors MOTOPOWER MP0514A-UK de 12 V

1. Producte acabatview

The MOTOPOWER MP0514A-UK is a 12V digital battery and alternator tester designed for quick and accurate assessment of vehicle battery health and charging system performance. It features an LCD display for voltage readings and LED indicators for battery and alternator status.

1.1. Què hi ha a la caixa

• MOTOPOWER MP0514A-UK Tester Body

2. Informació de seguretat

• Utilitzeu sempre la protecció ocular adequada quan treballeu amb bateries de vehicles.
• Assegureu-vos una ventilació adequada a la zona de treball.
• Eviteu el contacte amb l'àcid de la bateria.
• The device features reverse connection and over-voltage protecció per a un funcionament segur.
• No utilitzeu el provador si sembla danyat.

3. Configuració i connexió

The MOTOPOWER MP0514A-UK is designed for easy connection to 12V vehicle batteries and charging systems.

1. Ensure the vehicle engine is off before connecting the tester for battery status check.
2. Connecteu el vermell clamp al terminal positiu (+) de la bateria de 12 V.
3. Connecteu el negre clamp al terminal negatiu (-) de la bateria de 12 V.
4. The digital display will illuminate, showing the current battery voltage. If connected in reverse, a "REVERSE" LED indicator will light up.

4. Funcionament

4.1. Battery Status Test

To check the battery's state of charge:

1. Ensure the tester is connected correctly to the battery terminals with the vehicle engine off.
2. Llegeix el voltage displayed on the digital screen.
3. Observe the LED indicators on the left side of the tester (labeled "STATE OF CHARGE"):
   • COMPLET: La bateria està completament carregada.
   • MITJÀ: Battery has a medium charge.
   • BAIXA: Battery charge is low.
   • BUIT: Battery is discharged and may need charging or replacement.

4.2. Alternator Output Test

To check the alternator's charging performance:

1. Ensure the tester is connected correctly to the battery terminals.
2. Start the vehicle engine and let it run at idle.
3. Observe the LED indicators on the right side of the tester (labeled "Alternator"):
   • ALTA: Alternator output is too high.
   • BÉ: Alternator is charging correctly.
   • MORTS: Alternator is not charging or output is too low.
4. The digital display will show the charging voltage.

5. Solució De Problemes

• No Display/No LEDs:
  • Comproveu si el clamps estan connectats de manera segura als terminals de la bateria.
  • Ensure the battery has at least 4V DC. If voltage is below 4V, the display will show "LO".
  • Verify correct polarity. If connected in reverse, the "REVERSE" LED should light up.
• Display shows "LO":
  • La bateria voltage is below the measurable range of 4V DC. The battery is severely discharged or faulty.
• Display shows "HI":
  • El voltage is above the measurable range of 20V DC. This indicates an over-voltage condition, potentially from a faulty charging system.
• Lectures inexactes:
  • Assegureu-vos que clamps are clean and have good contact with battery terminals.
  • Test on a different 12V battery to confirm device functionality.

6. Manteniment

• Clean the tester body and clampamb un drap suau i sec després de cada ús.
• Store the device in a dry, cool place away from direct sunlight and corrosive materials.
• No submergiu el dispositiu en aigua o cap altre líquid.
• Inspeccioneu regularment els cables i el clamps for any signs of damage.

7. Especificacions

8. Garantia i Suport

MOTOPOWER offers a two-year warranty and lifetime service for this product. To activate your warranty, please register your product on the official MOTOPOWER website. For technical support or warranty claims, please contact MOTOPOWER customer service through their official channels.

Per a més informació, visiteu el Botiga MOTOPOWER a Amazon.