Waring Commercial WDM360TX Heavy-Duty Triple Spindle Drink Mixer User Manual

Garanties importants

Quan s'utilitzen aparells elèctrics, sempre s'han de seguir les precaucions bàsiques de seguretat, incloses les següents:

• Llegiu totes les instruccions abans d'utilitzar.
• To protect against electrical hazards, do not immerse the mixer base in water or other liquids.
• Desendolleu la presa de corrent quan no estigui en ús, abans de posar o treure peces i abans de netejar.
• Eviteu el contacte amb les peces mòbils.
• No feu servir cap aparell amb un cable o un endoll danyats, o després que l'aparell funcioni malament o s'hagi caigut o s'hagi danyat de cap manera.
• L'ús d'accessoris no recomanats o venuts per Waring Commercial pot causar incendis, descàrregues elèctriques o lesions.
• No utilitzar a l'aire lliure.
• No deixeu que el cable pengi de la vora de la taula o del taulell, ni toqui superfícies calentes.
• Keep hands and utensils out of the container while mixing to prevent the possibility of severe personal injury and/or damage to the appliance.
• Always operate the mixer with the mixing cup in place.
• Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat. .
• Els nens han de ser supervisats per assegurar-se que no juguin amb l'aparell.

Producte acabatview

The Waring Commercial WDM360TX is a heavy-duty triple spindle drink mixer designed for commercial use. It features three independent 1 HP motors, programmable countdown timers, and a digital display for precise control over mixing operations. The unit is constructed with a durable die-cast housing and includes three stainless steel mixing cups.

Figura 1: Frontal view of the Waring Commercial WDM360TX Triple Spindle Drink Mixer.

Figura 2: Primer pla view of the digital display and controls for each spindle.

Figure 3: Product dimensions of the WDM360TX mixer.

Configuració

1. Desembalatge: Carefully remove the mixer from its packaging. Retain all packaging materials for future storage or shipping.
2. Col·locació: Place the mixer on a stable, level, and dry surface. Ensure adequate clearance around the unit for ventilation and operation.
3. Connexió d'alimentació: Connect the 120V, 5-15 Phase Plug to a grounded electrical outlet.
4. Cup Rests: Ensure the cup rests are securely in place. They are designed for easy removal for cleaning.
5. Mixing Cups: Place the stainless steel mixing cups onto the cup rests. The mixer features increased cup clearance, eliminating the need to tilt cups before or after mixing.

Instruccions de funcionament

Funcionament general

• The WDM360TX features three independent spindles, each with its own 1 HP motor and controls.
• Each spindle can be operated independently with its own programmable timer and speed settings.
• The mixer includes both solid agitators for hard ice creams and butterfly agitators for soft ice creams and mix-ins. Ensure the correct agitator is installed for your application.

Using the Digital Controls

1. Encès: Locate the main power switch, typically on the side or back of the unit, and turn it ON.
2. Estableix el temporitzador: Utilitza el + i - buttons next to each spindle's digital display to set the desired mixing time. The timer can be programmed before or during operation.
3. Seleccioneu la velocitat: Premeu el botó VELOCITAT button to cycle through the three available speeds (15,000 RPM, 18,000 RPM, 21,000 RPM). The selected speed will be indicated by illuminated LEDs.
4. Comença a barrejar: Place the mixing cup with ingredients onto the cup rest. The mixer features automatic start/stop operation; the spindle will activate when the cup is properly seated and deactivate when removed.
5. Funció de pols: For intermittent mixing or to break up larger ingredients, use the PULSO button. The momentary pulse switch will operate at the currently selected speed.
6. Tancament automàtic: The mixer will automatically shut off once the programmed timer for that spindle reaches zero.

Manteniment i Neteja

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Waring Commercial WDM360TX drink mixer.

1. Neteja diària:
   • Desconnecteu sempre la batedora abans de netejar-la.
   • Netegeu l'exterior de la unitat amb un anunciamp drap i detergent suau. No utilitzeu productes de neteja abrasius ni submergiu la unitat en aigua.
   • Remove the stainless steel mixing cups and wash them with warm, soapy water. Rinse thoroughly and dry.
   • The cup rests are easy to remove for thorough cleaning. Wash them with warm, soapy water, rinse, and dry before reattaching.
   • Clean the agitators after each use. They can be removed for easier cleaning.
2. Manteniment del motor: The 1 peak horsepower motor is user-replaceable. Refer to the detailed service manual for replacement procedures if necessary.
3. Sistema de flux d'aire: The independent airflow system helps keep the motors cool. Ensure the air vents are not obstructed.

Resolució de problemes

Especificacions

• Model: WDM360TX
• Marca: Comercial Waring
• Potència: 1 HP motor per spindle (3 total)
• Voltage: 120 V
• Tipus d'endoll: Endoll de fase 5-15
• Velocitats: 3 (15,000 RPM, 18,000 RPM, 21,000 RPM)
• Controls: LCD Digital Display, Programmable Push Buttons for Speed and Timer, Pulse Function
• Característiques: Automatic Start/Stop, Auto Shut Off, Increased Cup Clearance, User-Replaceable Motor, Independent Airflow System
• Components inclosos: Three Stainless Steel Mixing Cups
• Construcció: Heavy-Duty Die-Cast Housing, Stainless Steel
• Dimensions (P x A x A): 10.5" x 13" x 19.7"
• Pes: 37 lliures
• Certificacions: cTUVus, NSF

Garantia i Suport

The Waring Commercial WDM360TX Heavy-Duty Triple Spindle Drink Mixer comes with a 1 anys de garantia limitada. For warranty claims, technical support, or service inquiries, please contact Waring Commercial customer service. Keep your purchase receipt as proof of purchase for warranty validation.