Informació important de seguretat
Before operating your Hover-1 Switch, please read all instructions thoroughly. Failure to follow these instructions may result in serious injury, property damage, and void your warranty. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads, when riding.
- Porteu sempre casc i l'equip de seguretat adequat (genolleres, colzeres) quan aneu en bicicleta.
- Assegureu-vos que el dispositiu estigui completament carregat abans de cada ús.
- No conduïu sota els efectes de les drogues o l'alcohol.
- Avoid riding on uneven surfaces, steep inclines, or in wet conditions.
- Always adhere to local traffic laws and regulations.
- Supervise children operating the device.
Image: Always wear a helmet and safety gear when operating the Hover-1 Switch.
Producte acabatview
The Hover-1 Switch is an innovative 2-in-1 electric device that transforms between a scooter and a skateboard. It is designed for recreational use, offering a unique and versatile riding experience. The device features a powerful 90W brushless motor, an electronic throttle and brake, and a durable construction for reliable performance.
Image: The Hover-1 Switch in its scooter configuration, ready for use.
Muntatge i muntatge
Càrrega inicial
Before first use, fully charge the Hover-1 Switch. The 25.2V Lithium-ion battery requires approximately 2.5 hours for a full charge.
- Localitzeu el port de càrrega del dispositiu.
- Connect the charger to the device, then plug the charger into a standard wall outlet.
- The charging indicator light will change to show charging status (refer to charger manual for specific light indications).
- Un cop estigui completament carregat, desconnecteu el carregador.
Converting Between Scooter and Skateboard Mode
The Hover-1 Switch features an easy lock and release mechanism for tool-free conversion.
- To convert from Scooter to Skateboard: Locate the lock and release mechanism near the base of the handlebar. Disengage the lock and carefully detach the handlebar and the front LED wheel assembly. Attach the included front skateboard wheels to the designated slots on the board. Ensure all components are securely fastened.
- To convert from Skateboard to Scooter: Remove the front skateboard wheels. Reattach the handlebar and front LED wheel assembly, ensuring the lock mechanism is fully engaged and secure.
Image: The "Switch" mechanism allows for easy conversion between scooter and skateboard modes without tools.
Instruccions de funcionament
Controls
- Botó d'encesa: Located on the device, press to turn on/off.
- Electronic Throttle: Used to accelerate. Gently press to increase speed.
- Fre electrònic: Used to slow down or stop. Apply gently for smooth braking.
- Remote Control (Skateboard Mode): The skateboard mode is controlled via a remote. Refer to the remote's specific instructions for pairing and operation.
Indicador de bateria
Monitor the battery level using the integrated indicator to ensure you have sufficient charge for your ride.
Image: The battery indicator helps you track the remaining charge.
Speed and Range
The Hover-1 Switch can reach different maximum speeds depending on the mode and rider weight. The maximum speed for the skateboard is 7 mph, and for the scooter, it is 9 mph. A full charge can provide a range of up to 2.5 miles.
Image: The Hover-1 Switch offers a maximum speed of 7 mph in skateboard mode and 9 mph in scooter mode.
Manteniment
Cura de la bateria
- Carregueu la bateria completament després de cada ús.
- If storing for an extended period, charge the battery to 50% every 3 months to maintain battery health.
- No exposeu la bateria a temperatures extremes.
Neteja i emmagatzematge
- Netegeu el dispositiu amb un anunciamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Store the Hover-1 Switch in a cool, dry place away from direct sunlight and moisture.
Resolució de problemes
Especificacions
Image: The Hover-1 Switch is powered by a 90W brushless motor for efficient performance.
Informació de la garantia
The Hover-1 Switch comes with a 90-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Atenció al client
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Hover-1 customer support. Refer to the official Hover-1 weblloc web per obtenir la informació de contacte més actualitzada.
Per obtenir recursos addicionals i informació sobre el producte, podeu visitar la Hover-1 Brand Store on Amazon.
