1. Introducció i finalview
The Ledvance Endura Pro Flood LED Outdoor Projector is a highly efficient, wall-mounted sensor floodlight designed for outdoor use. It features a wide beam angle and an innovative optical design, providing uniform surface illumination. Equipped with a motion detector, this projector offers enhanced security and convenience for various outdoor applications.
Key features include an adjustable lamp head for customized lighting, a robust IP55 protection rating for outdoor durability, and an IK05 impact resistance rating. This product is suitable for illuminating parking lots, squares, parks, and other exterior areas.
Figure 1: Ledvance Endura Pro Flood LED Projector packaging.
2. Informació de seguretat
Llegiu atentament totes les instruccions de seguretat abans de la instal·lació i el funcionament. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o altres perills.
- Seguretat elèctrica: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
- Ús exterior: This product is designed for outdoor use with an IP55 rating, protecting against dust and low-pressure water jets. Do not submerge the product in water.
- Muntatge: Mount the projector securely on a stable surface that can support its weight.
- Font de llum: This luminaire contains a non-replaceable LED light source. Do not attempt to replace the LED module.
- Temperatura de funcionament: Ensure the operating environment is within the specified temperature range to prevent overheating.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- 1 x Ledvance Endura Pro Flood LED Projector with Motion Detector
- Materials de muntatge (cargols, tacs de paret) - (Typically included, but check your specific package)
- Manual d'instruccions
4. Configuració i instal·lació
Follow these steps for proper installation of your LED projector:
- Preparació: Disconnect power at the main circuit breaker before beginning installation. Choose a suitable mounting location on an outdoor wall, ensuring it is stable and provides the desired illumination coverage.
- Muntatge: Use the provided mounting hardware to securely attach the projector to the wall. Mark the drilling points, drill holes, insert wall plugs, and then fasten the projector base.
- Cablejat: Connect the electrical wires (Live, Neutral, Earth) from your power supply to the corresponding terminals on the projector. Ensure all connections are tight and properly insulated. Refer to the wiring diagram in the product packaging for specific details.
- Ajust de Lamp Cap: El lamp head is pivotable. Adjust its angle to direct the light beam to your desired area.
Figura 2: Dimensions del producte per a la planificació de la instal·lació.
5. Instruccions de funcionament
The Ledvance Endura Pro Flood projector offers four selectable operating modes. These modes are typically set via controls located on the unit, often behind a cover or on the side panel.
Figura 3: Example of sensor and adjustment controls (actual appearance may vary).
5.1. Selecció de mode
Refer to the markings next to the adjustment dials or switches on your specific unit to select one of the following modes:
- Llum permanent: The projector remains continuously illuminated, regardless of motion or ambient light levels.
- En espera: The projector may operate at a reduced brightness level (e.g., 20%) and switch to full brightness upon motion detection. This mode provides a constant low-level light for ambiance and security.
- Activació de moviment: The projector turns on to full brightness only when motion is detected within its sensor range. It will turn off after a set delay if no further motion is detected.
- Del capvespre a l'alba: The projector automatically turns on at dusk and off at dawn, based on ambient light levels. Motion detection may still be active in this mode, triggering full brightness when needed.
5.2. Sensor Adjustments
Your projector typically includes controls for:
- Retard de temps (TEMPS): Adjusts how long the light stays on after motion is detected.
- Sensibilitat (SENS): Adjusts the detection range or sensitivity of the motion sensor.
- Lux Level (LUX): Sets the ambient light threshold at which the sensor becomes active (for dusk-to-dawn or motion modes).
Experiment with these settings to achieve optimal performance for your specific environment.
Figure 4: Motion detection in action, illuminating a path.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del projector.
- Neteja: Netegeu periòdicament la lent i la finestra del sensor amb un drap suau i sec.amp cloth to remove dust, dirt, or debris that may obstruct light output or sensor function. Do not use abrasive cleaners or solvents.
- Inspecció: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten any loose screws and replace damaged components if necessary.
- No hi ha peces reparables per l'usuari: The LED light source is integrated and not user-replaceable. Do not attempt to open the housing or modify the internal components.
7. Solució De Problemes
Si teniu problemes amb el projector, consulteu els problemes i solucions més comuns següents:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power supply; faulty wiring; sensor settings incorrect; ambient light too high. | Check circuit breaker and power connections. Verify wiring. Adjust LUX setting to a lower value. Ensure motion is within sensor range. |
| La llum es manté encesa contínuament. | Mode set to Permanent Light; continuous motion detected; sensor faulty. | Change operating mode. Check for constant movement in sensor range (e.g., tree branches). Clean sensor lens. |
| La llum s'encén aleatòriament. | Sensor too sensitive; environmental factors (e.g., animals, heat sources, wind). | Reduce SENS setting. Reposition projector to avoid false triggers. |
| La llum és tènue o parpelleja. | Insufficient power; wiring issue; product defect. | Check power supply and wiring connections. If problem persists, contact customer support. |
Si els passos de resolució de problemes no resolen el problema, poseu-vos en contacte amb l'atenció al client per obtenir més ajuda.
8. Especificacions
| Especificació | Valor |
|---|---|
| Marca | LEDVANCE |
| Número de model | 4058075228849 |
| Dimensions del producte (L x A x A) | 20.1 x 5.6 x 22.5 cm |
| Pes de l'article | 480 g |
| Grau de protecció IP | IP55 |
| Material | Policarbonat (PC) |
| Poder | 30 watts |
| Flux lluminós | 3000 lm |
| Temperatura de color | 4000 Kelvin |
| Vida mitjana | 50000 hores |
| Estil | Amb detector de moviment |
| Tipus de bombeta | LED |
| Voltage | 230 Volts |
| País d'origen | Alemanya |
9. Garantia i Suport
This Ledvance Endura Pro Flood LED Projector comes with a 10 anys de garantia, ensuring quality and reliability. For warranty claims or technical support, please retain your proof of purchase and contact your retailer or Ledvance customer service.
For additional information or assistance, please visit the official Ledvance weblloc web o consulteu el vostre distribuïdor local.