Mophorn Remote Control Automatic Parking Lock Instruction Manual

1. Producte acabatview

The Mophorn Remote Control Automatic Parking Lock is designed to secure your private parking space. It features a robust, waterproof metal casing and offers convenient remote operation. This device helps prevent unauthorized parking and provides protection against external impacts.

Figure 1: Mophorn Automatic Parking Lock with key dimensions.

Característiques principals:

• Construcció duradora: Features a robust, waterproof metal casing with a smooth paint finish. Designed for internal mounting to deter theft.
• 180° Anti-Collision: The parking lock arm has a flexible design that allows it to pivot up to 180 degrees, protecting it from external collisions.
• Automatic Alarm System: Equipped with an alarm that activates upon unauthorized operation or attempts to force the arm down.
• High Pressure Resistance: The curved design and thick steel shell allow the parking lock to withstand up to 5 tons of pressure without damage.
• Comandament a distància: Operates with a remote control, offering an effective range of up to 30 meters for convenient use.

2. Configuració i instal·lació

Proper installation ensures the security and functionality of your parking lock. The unit is designed for secure floor mounting.

Passos d'instal·lació:

1. Tria la ubicació: Select a suitable, flat surface within your parking space for mounting. Ensure the location allows for the full range of motion of the parking lock arm.
2. Marca els punts de perforació: Place the parking lock base on the desired spot and mark the positions for the mounting holes.
3. Forats: Use an appropriate drill bit to create holes at the marked points.
4. Assegurar la unitat: Insert the provided expansion bolts into the drilled holes. Place the parking lock over the bolts and tighten securely. Ensure the unit is firmly attached to the ground.
5. Instal·lació de la bateria: Open the battery compartment on the base of the unit. Insert 4 D-cell batteries (not included) according to the polarity indicators. Close the compartment securely.

Figure 2: Included components for installation and operation.

Figure 3: Parking lock in the upright, secured position.

Figure 4: Parking lock in the flat, unlocked position.

3. Instruccions de funcionament

The parking lock is operated using the provided remote control.

Ús del comandament a distància:

• To raise the parking lock arm (secure position), press the Up botó del comandament a distància.
• To lower the parking lock arm (unlocked position), press the Avall botó del comandament a distància.

Figure 5: Operating the parking lock with the remote control.

Automatic Alarm System:

The integrated alarm system will activate if the parking lock arm is subjected to unauthorized force or attempts to be manually lowered without the remote control. This provides an additional layer of security for your parking space.

4. Manteniment

Regular maintenance ensures the longevity and optimal performance of your Mophorn parking lock.

Substitució de la bateria:

• When the battery level is low, the unit may indicate this with a specific light pattern or reduced performance.
• To replace batteries, use the provided key to unlock the battery compartment on the base.
• Remove the old batteries and insert 4 new D-cell batteries, ensuring correct polarity.
• Securely close and lock the battery compartment.

Figure 6: Key lock for accessing the battery compartment.

Neteja i cura:

• Netegeu l'exterior del bloc amb l'anunciamp drap per eliminar la brutícia i les restes. Eviteu productes de neteja abrasius.
• While the unit is waterproof, avoid submerging it in water for extended periods (e.g., more than 4 hours).
• Regularly check mounting bolts for tightness and re-tighten if necessary.

5. Solució De Problemes

This section addresses common issues you might encounter with your parking lock.

El control remot no respon:

• Comproveu les bateries: Ensure the batteries in both the parking lock and the remote control are fresh and correctly installed.
• Re-pair Remote Control: If the remote control loses connection, follow these steps to re-pair it:
  
  1. Connect the power supply (ensure batteries are installed). The LED indicator will light up for approximately 4 seconds.
  2. During this 4-second window, first press the Desbloqueja button on the remote, then immediately press the Bloqueig botó.
  3. A flashing LED on the parking lock indicates successful pairing.
• Obstrucció: Ensure there are no physical obstructions between the remote control and the parking lock.

Alarm Sounds Unexpectedly:

• Check for Tamperen: The alarm is designed to activate if unauthorized force is applied. Inspect the unit for signs of tampering o impacte.
• Factors ambientals: Extreme weather conditions or vibrations might trigger the alarm. Ensure the unit is securely mounted.

Parking Lock Arm Does Not Move Smoothly:

• Neteja els residus: Check for any debris (e.g., small stones, leaves) obstructing the arm's movement mechanism.
• Lubricació: Apply a small amount of silicone-based lubricant to the pivot points if movement feels stiff.

Figure 7: The 180-degree anti-collision feature allows the arm to flex upon impact.

6. Especificacions

Detailed technical specifications for the Mophorn Automatic Parking Lock.

7. Garantia i Suport

Per obtenir informació sobre la garantia o assistència tècnica, consulteu la documentació proporcionada en el moment de la compra o poseu-vos en contacte amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.