1. Introducció
This manual provides comprehensive instructions for the installation, setup, and operation of the SAMOTECH SM309-S Zigbee Dimmer. This device is designed to integrate seamlessly into your smart home ecosystem, offering advanced lighting control capabilities.
2. Informació de seguretat
- La instal·lació només l'ha de dur a terme un electricista qualificat.
- Assegureu-vos que l'alimentació estigui desconnectada a l'interruptor automàtic abans de la instal·lació o el manteniment.
- Do not exceed the maximum load ratings specified in the specifications section.
- Aquest dispositiu només és per a ús interior.
- Operar dins del volum especificattagrang e (100-240VAC).
3. Característiques del producte
- New model based on the latest Zigbee 3.0 protocol.
- Compatible with Philips Hue, Homekit, Echo Plus, Hubitat, Home Assistant (ZHA, deConz, Conbee, Raspbee), and other universal Zigbee gateways.
- Requires a neutral wire for operation.
- Supports 100-240VAC wide input and output voltage.
- Supports resistive, capacitive, or inductive loads.
- Requires a retractive switch (push button) to operate.
- Single channel output, up to 400W.
- Innovative minimum dimming level and startup brightness setting function.
- Input and Output with Screw Terminals for safe and reliable connections.
- Can directly pair to a compatible Zigbee remote via Touchlink without a coordinator.
- Supports Zigbee green power and can bind a maximum of 20 Zigbee green power remotes.
- Supports self-forming Zigbee network without a coordinator and can add other devices to the network.
4. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- 1 x SAMOTECH SM309-S Zigbee Dimmer Module
- 1 x Manual d'instruccions (aquest document)
5. Especificacions
| Paràmetre | Valor |
|---|---|
| Número de model | SM309-S |
| Dimensions del producte | 1.77 x 1.77 x 0.79 polzades (45 x 45 x 20 mm) |
| Pes de l'article | 1.41 unces (40 grams) |
| Vol d'entrada/sortidatage | 100-240VAC |
| Max Resistive Load | 400W |
| Max LED Load | 200W |
| Temperatura de funcionament | -25 °C a +50 °C |
| Certificació | CE |
Figura 1: Frontal view of the SAMOTECH SM309-S Zigbee Dimmer Module, showing terminals and reset button.
6. Instal·lació
6.1 Esquemes de cablejat
Important: Ensure power is OFF at the circuit breaker before proceeding with any wiring.
Figure 2: Basic wiring diagram for connecting the SM309-S module to a dimmable LED light. This setup shows the neutral (N) and live (L) connections from the mains, and the output (L, N) to the dimmable light.
Figure 3: Wiring diagram illustrating the connection of the SM309-S module with an external push-button switch and a dimmable LED light. The push button connects to the 'PUSH' terminals (A1-A2) for manual control.
6.2 Passos d'instal·lació
- Desconnecteu l'alimentació principal al disjuntor.
- Connect the Live (L) and Neutral (N) wires from your mains supply to the corresponding 'L' and 'N' input terminals on the SM309-S module.
- Connect the Live (L) and Neutral (N) wires of your dimmable light fixture to the 'L' and 'N' output terminals on the SM309-S module.
- If using an external push-button switch, connect the switch to the 'A1' and 'A2' terminals. This allows for local manual control.
- Securely place the module within a suitable electrical box or enclosure, ensuring proper ventilation and adherence to local electrical codes.
- Resta l'alimentació al disjuntor.
7. Configuració i emparellament
7.1 Pairing with a Zigbee Gateway (e.g., Philips Hue, Home Assistant)
- Ensure your Zigbee gateway is in pairing mode. Refer to your gateway's specific instructions for this step.
- Power on the SM309-S module.
- Press and hold the 'Reset' button on the SM309-S module for approximately 5 seconds until the connected light blinks, indicating it's in pairing mode.
- The module should appear in your gateway's device list. Follow the on-screen prompts to complete the pairing process.
- Once paired, you can control the dimmer via your smart home app.
Figure 4: Screenshot of the Philips Hue app displaying the SM309-S module recognized as a "Hue white light" with model "SM309".
Figure 5: Screenshot of a smart home app (likely Amazon Alexa) showing brightness control for a connected light, indicating successful integration.
7.2 Touchlink Pairing with a Zigbee Remote
The SM309-S supports Touchlink pairing with compatible Zigbee remotes without needing a central coordinator.
- Bring the Zigbee remote close to the SM309-S module (within 10 cm).
- Initiate Touchlink pairing on your Zigbee remote (refer to the remote's manual for specific instructions).
- The connected light will blink to confirm successful pairing.
7.3 Setting Minimum Dimming Level and Startup Brightness
The SM309-S allows for customization of dimming behavior:
- Minimum Dimming Level: Press and hold the 'Min.Set' button until the light reaches your desired minimum brightness. Release the button to set. This prevents flickering at very low levels.
- Brillantor d'inici: The module will typically remember the last brightness setting. Some gateways may offer options to set a default startup brightness.
8. Instruccions de funcionament
8.1 Manual Control (via Push Button)
- Premsa curta: Toggle the light ON/OFF.
- Premsa llarga: Dim the light up or down. Release and press again to reverse dimming direction.
8.2 Smart Control (via Zigbee Gateway/App)
Once paired with a compatible Zigbee gateway, you can control the dimmer using its associated mobile application or voice commands (if integrated with a voice assistant like Alexa or Google Assistant).
- Turn lights ON/OFF.
- Adjust brightness levels from 0-100%.
- Include in scenes, routines, and automations within your smart home system.
9. Manteniment
- The SM309-S module requires no routine maintenance.
- To clean the device, ensure power is off and wipe with a dry, soft cloth. Do not use liquid cleaners.
- Periodically check wiring connections for tightness, especially after initial installation.
10. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén/apaga o no s'atenua. | No power, incorrect wiring, module not paired, incompatible bulb. | Check power supply. Verify wiring against diagrams. Re-pair the module with the gateway. Ensure bulb is dimmable. |
| Light flickers at low dimming levels. | Minimum dimming level not set correctly, incompatible bulb. | Adjust the minimum dimming level using the 'Min.Set' button. Try a different dimmable LED bulb. |
| Module cannot be found by Zigbee gateway. | Module not in pairing mode, too far from gateway, interference. | Ensure module is in pairing mode (reset button). Move module closer to gateway. Check for other Zigbee devices causing interference. |
| Manual push button does not work. | Incorrect wiring of push button, faulty button. | Verify push button wiring to A1/A2 terminals. Test the push button for functionality. |
11. Garantia i Suport
Els productes SAMOTECH estan dissenyats per a la fiabilitat i el rendiment. Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de SAMOTECH. weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el rebut de compra per a reclamacions de garantia.
Per obtenir més ajuda, visiteu: www.samotech.co.uk
