Einhell TE-CD Power X-Change 18-Volt Cordless Drill/Driver Kit

1. Instruccions de seguretat

Llegiu i comprengueu sempre tots els avisos de seguretat, instruccions, il·lustracions i especificacions que s'inclouen amb aquesta eina elèctrica. Si no seguiu totes les instruccions que s'indiquen a continuació, podeu patir descàrregues elèctriques, incendis i/o lesions greus.

1.1 Seguretat general

• Utilitzeu sempre l'equip de protecció individual adequat, incloent-hi protecció ocular, protecció auditiva i guants.
• Mantingueu la vostra zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden a accidents.
• No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Mantingueu els nens i els espectadors allunyats mentre feu servir una eina elèctrica. Les distraccions poden fer que perdis el control.

1.2 Seguretat de la bateria

• Use only the specified charger for the battery pack. Using any other charger may create a risk of injury and fire.
• No desmunteu, obriu ni trossegeu les bateries.
• Protect battery packs from heat and fire. Avoid storage in direct sunlight.
• In case of battery leakage, avoid contact with skin and eyes. If contact occurs, wash with plenty of water and seek medical advice.

ADVERTÈNCIA: Aquest producte us pot exposar a productes químics que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius. Per a més informació, visiteu www.P65Warnings.ca.gov.

2. Producte acabatview

The Einhell TE-CD 18/2 Li Kit is a versatile cordless drill/driver designed for various tasks around the home, workshop, and garage. It is part of the Einhell Power X-Change family, allowing for battery interchangeability across a wide range of tools.

2.1 Característiques clau

• Power X-Change System: Utilizes the 18-Volt battery system, providing compatibility with all Einhell Power X-Change tools and garden equipment.
• Ajust de parell: Features 21 torque settings and a 2-speed gearing system, allowing precise control for different materials and applications. Maximum torque of 44 Nm.
• Disseny ergonòmic: Equipped with a soft grip handle for comfortable and extended operation, reducing user fatigue.
• Llum LED integrada: An LED light is included to illuminate the work area, improving visibility in dimly lit spaces.
• Quick-Stop Function: Ensures immediate stopping of the chuck for enhanced safety and control.

2.2 Components inclosos

• Cordless Drill/Driver (TE-CD 18/2 Li)
• Bateria de ions de liti de 1.5 Ah
• Carregador ràpid
• Screw Driver/Drill Bits (3 drill bits, 4 Phillips screwdriver bits)
• LED Lamp (TE-CL 18Li)
• USB Charger Adapter (with 1A and 2.1A 5V ports)
• Clip de cinturó
• Tool Bag for transport and storage

3. Configuració

3.1 Càrrega de la bateria

1. Connect the fast charger to a standard 110V power outlet.
2. Slide the 1.5 Ah Lithium-Ion battery onto the charger until it clicks into place.
3. The charger's indicator lights will show the charging status. A fully discharged 1.5 Ah battery typically charges in approximately 30 minutes.
4. Un cop estigui completament carregat, traieu la bateria del carregador.

3.2 Attaching/Removing the Battery

• To attach: Align the battery with the base of the drill/driver and slide it in until it locks securely.
• To remove: Press the battery release button(s) on the sides of the battery and slide it out.

3.3 Installing Drill/Screwdriver Bits

• Ensure the drill/driver is switched off and the direction switch is in the center (locked) position.
• Twist the keyless chuck counter-clockwise to open the jaws.
• Insert the desired drill or screwdriver bit into the chuck.
• Twist the chuck clockwise to tighten the jaws securely around the bit. Ensure the bit is centered and firmly held.

4. Instruccions de funcionament

4.1 Selecting Speed and Torque

• Selecció de velocitat: Use the gear selector switch on top of the drill to choose between two speeds: Low speed (Gear 1, approx. 0-350 RPM) for high torque applications like driving screws, and High speed (Gear 2, approx. 0-1250 RPM) for faster drilling.
• Ajust de parell: Rotate the torque collar behind the chuck to select the desired torque setting (1-20) or the drill mode (drill icon). Lower settings are for smaller screws or softer materials, while higher settings and drill mode are for larger screws or drilling.

4.2 Drilling and Screwdriving

1. Select the appropriate speed and torque setting for your task.
2. Set the direction switch (forward/reverse) to the desired rotation. For driving screws or drilling, set it to forward.
3. Col·loqueu la broca sobre la peça de treball.
4. Press the trigger switch to start the drill. The integrated LED light will illuminate the work area.
5. Apply steady, even pressure. For screwdriving, release the trigger once the screw is flush or the clutch engages. For drilling, continue until the desired depth is reached.

4.3 Using the LED Lamp

• Attach a charged Power X-Change battery to the base of the LED lamp.
• Premeu el botó d'encesa de la lamp per encendre-lo. La lamp offers two settings for diffusion, allowing adjustment of the light spread.
• El lamp can be positioned to direct light precisely where needed, enhancing visibility in dark or confined spaces.

4.4 Using the USB Charger Adapter

• Attach a charged Power X-Change battery to the USB charger adapter.
• Connect your USB-powered device (e.g., smartphone, tablet) to one of the two USB ports (1A or 2.1A) on the adapter.
• The adapter will begin charging your device, providing portable power from your Einhell battery.

4.5 Vídeos oficials de productes

5. Manteniment

5.1 Neteja

• Regularly clean the ventilation slots of the tool to prevent overheating.
• Netegeu l'exterior de l'eina amb un drap suau iamp tela. No utilitzeu agents de neteja o dissolvents forts.
• Clean the chuck jaws periodically to ensure proper gripping of bits.

5.2 Emmagatzematge

• Store the tool and batteries in a dry, cool place, away from direct sunlight and moisture.
• For long-term storage, ensure batteries are partially charged (around 50%) to maintain their lifespan.
• Keep all components in the provided tool bag to protect them from dust and damage.

6. Solució De Problemes

This section addresses common issues you might encounter with your Einhell TE-CD Power X-Change drill/driver kit.

7. Especificacions

8. Garantia i Suport

Einhell warrants all new products for dos anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For warranty claims, technical support, or any inquiries regarding your Einhell product, please refer to the contact information provided in your product packaging or visit the official Einhell USA weblloc.