Producte acabatview
This CKPSMS 110V Foot Control Pedal is designed as a replacement part for various Bernina brand home sewing machines. It provides precise speed control for your sewing machine, ensuring smooth operation.
Image: The CKPSMS 110V Foot Control Pedal with its attached power cord and machine connector.
Compatibilitat
This foot control pedal is compatible with/replacement for the following Bernina brand sewing machine models:
- 700, 730 Record
- 801, 801S, 802S, 803S, 807, 808, 809, 810, 811, 817, 819
- 830 Record, 831, 832, 840, 850
- 1000, 1015
Nota important:
This pedal is designed for machines with ROUND PIN TYPE CONNECTIONS (3 or 4 PINS). It is approved for 110-120V machines. Please verify your machine's connection type before use.
Image: Close-up of the foot pedal's connector, clearly showing the round pin configuration. An 'X' marks a flat-pin connector, indicating incompatibility.
Image: Comparison showing a sewing machine's receptacle with round pin holes (marked with a green check) and a receptacle with flat pin slots (marked with a red 'X'), illustrating the correct connection type.
Image: The foot pedal's plug with text advising users to check their old plug for matching pin type. It also notes that a 4-pin hole can replace an old 3-pin hole model and that it adapts to 110V-120V.
Configuració i instal·lació
- Verificar la compatibilitat: Before connecting, ensure your sewing machine requires a foot control pedal with round pin type connections (3 or 4 pins) and operates on 110-120V.
- Apagar: Ensure your sewing machine is turned off and unplugged from the power outlet.
- Connect Pedal: Locate the foot control receptacle on your sewing machine. Align the round pins of the CKPSMS foot control pedal's connector with the corresponding holes in the machine's receptacle and firmly insert it.
- Connecteu-vos a l'alimentació: Plug the power cord of the foot control pedal into a standard 110-120V electrical outlet.
- Funcionalitat de prova: Turn on your sewing machine and gently press the foot pedal to test its operation and speed control.
Instruccions de funcionament
The foot control pedal allows you to regulate the sewing speed of your machine. Pressing the pedal further down increases the speed, while releasing it slows down or stops the machine.
- Place the foot pedal on the floor in a comfortable position where you can easily operate it with your foot.
- Ensure the pedal is stable and does not slide during use.
- Apply gentle pressure to start sewing at a slow speed.
- Increase pressure for faster sewing.
- Release pressure to slow down or stop the machine.
Manteniment i Seguretat
Proper care and adherence to safety guidelines will ensure the longevity and safe operation of your foot control pedal.
- Neteja: Wipe the pedal with a dry, soft cloth to remove dust and debris. Do not use liquid cleaners or immerse the pedal in water.
- Emmagatzematge: Store the pedal in a dry place, away from direct sunlight and extreme temperatures, when not in use.
- Inspecció del cable: Regularly inspect the power cord for any signs of damage, fraying, or exposed wires.
- Desconnexió d'alimentació: Always disconnect the foot pedal from the power supply and the sewing machine before performing any maintenance or if you notice any issues.
- Mans seques: Do not use the product when your hands are wet.
- Voltagpartit electrònic: Do not connect the product to a power source with a voltage that does not match the specified 110-120V.
- Cable danyat: If the power cord is damaged, stop using the product immediately and replace it with a new one.
Image: A general safety guideline image for various sewing machine parts, including a foot pedal, emphasizing precautions like not using with wet hands, checking for cord damage, disconnecting power before repairs, and matching voltage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Pedal does not work. |
|
|
| Machine runs too fast/slow or inconsistently. |
|
|
Especificacions
- Número de peça: #325.232.041+329.221.03
- Voltage: 110-120V
- Tipus de connexió: Round Pin (3 or 4 pins)
- Fabricant: CKPSMS
- Pes de l'article: 13.6 unces
- Dimensions del paquet: 6.81 x 4.61 x 3.43 polzades
Garantia i Suport
For any questions regarding compatibility, installation, or troubleshooting, please contact CKPSMS customer support. When contacting support, please provide your machine brand and complete model number for accurate assistance.
You can typically reach support by sending a message via the platform where you purchased the product (e.g., Amazon).
