Introducció
This user manual provides essential information for the safe and effective use of your inSPORTline Invers Gravity Bench. Please read this manual thoroughly before assembly, operation, or maintenance to ensure proper function and to prevent injury. Keep this manual for future reference.
Instruccions de seguretat
- Consult a physician before starting any new exercise program, especially if you have pre-existing medical conditions such as high blood pressure, heart disease, glaucoma, or are pregnant.
- Ensure the gravity bench is assembled correctly and all bolts and nuts are securely tightened before each use.
- Place the bench on a flat, stable, non-slip surface. Do not use on uneven ground.
- Mantingueu els nens i les mascotes lluny de l'equip durant l'ús.
- Do not exceed the maximum weight capacity specified in the 'Specifications' section.
- Porteu calçat i roba esportiva adequats.
- Always use the safety straps and ankle restraints as instructed to prevent falls.
- Start with small inversion angles and gradually increase as comfort allows. Do not invert completely until you are comfortable and confident.
- If you experience pain, dizziness, or discomfort, slowly return to the upright position and discontinue use.
- Do not attempt to disassemble or modify the equipment.
Contingut del paquet
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
- Main Frame Components (Base, A-frame, Backrest support)
- Backrest Pad Assembly
- Ankle Holding System
- Nanses de seguretat
- Maquinari de muntatge (cargols, femelles, volanderes, claus)
- Manual d'usuari
Muntatge i muntatge
Assembly typically requires two people. Follow the steps below carefully. Refer to the included assembly diagram for visual guidance.
- Desempaquetar components: Traieu amb cura totes les peces de l'embalatge i col·loqueu-les sobre una superfície neta i plana.
- Muntar el marc base: Connect the main base bars using the provided bolts and nuts. Ensure all connections are secure.
- Attach A-Frame: Secure the A-frame supports to the base frame.
- Install Backrest Support: Mount the backrest support structure onto the A-frame.
- Mount Backrest Pad: Attach the padded backrest to its support structure. Ensure it is firmly secured.
- Assemble Ankle Holding System: Attach the ankle rollers and locking mechanism to the lower frame. Test the mechanism for smooth operation.
- Install Safety Handles: Secure the safety handles to the appropriate points on the frame.
- Comprovació final: Abans del primer ús, comproveu dues vegades tots els cargols, femelles i connexions per assegurar-vos que estiguin ben ajustats i segurs.
Image: The fully assembled inSPORTline Invers Gravity Bench, showing the padded backrest, ankle holding system, and safety handles.
Instruccions de funcionament
- Ajusta l'alçada: Adjust the height setting on the main shaft to match your body height. This ensures proper balance and rotation.
- Secure Ankles: Step onto the foot platform and secure your ankles firmly into the ankle holding system. Ensure the padding is comfortable and the lock is engaged.
- Find Balance Point: Slowly lean back, allowing the bench to pivot. Use the safety handles to control your movement. Find your balance point where the bench can easily rotate.
- Invertir: To invert, slowly raise your arms above your head. The bench will begin to rotate. Control the speed with your arm movements and the safety handles.
- Return Upright: To return to the upright position, slowly bring your arms down towards your sides or grasp the safety handles and pull yourself up.
- Desenganxar: Once fully upright and stable, release the ankle holding system and step off the bench.
Important: Always start with short inversion sessions (1-2 minutes) and gradually increase duration as your body adapts. Listen to your body and stop if you feel any discomfort.
Manteniment
- Neteja: Netegeu el marc i les superfícies encoixinades amb anunciamp drap després de cada ús. No utilitzeu productes de neteja abrasius ni dissolvents.
- Inspecció: Inspeccioneu regularment tots els cargols, femelles i peces mòbils per comprovar si estan ben ajustades i desgastades. Estrenyeu qualsevol element de fixació solt.
- Lubricació: Apply a small amount of silicone-based lubricant to pivot points and moving parts annually, or as needed, to ensure smooth operation.
- Emmagatzematge: Store the gravity bench in a clean, dry place away from direct sunlight and extreme temperatures.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Bench does not invert smoothly. | Incorrect height setting; pivot points need lubrication. | Adjust height setting to match user's height; lubricate pivot points. |
| Ankle holding system feels loose. | Not properly secured; worn padding. | Ensure ankle lock is fully engaged; inspect padding for wear and replace if necessary. |
| Sorolls de grinyols durant l'ús. | Loose fasteners; lack of lubrication. | Check and tighten all bolts and nuts; lubricate moving parts. |
Especificacions
- Marca: inSPORTline
- Número de model: 7120
- ASIN: B07YRFV771
- Tipus de producte: Gravity Inversion Bench
- Pes màxim de l'usuari: (Information not provided in input, placeholder for typical spec)
- Alçada recomanada de l'usuari: (Information not provided in input, placeholder for typical spec)
- Dimensions (muntat): (Information not provided in input, placeholder for typical spec)
Note: Specific dimensions and weight capacities should be verified from product packaging or official inSPORTline documentation.
Garantia i Suport
For warranty information, technical support, or to order replacement parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.
Fabricant: inSPORTline
