1. Introducció
This manual provides essential instructions for the safe installation, operation, and maintenance of your B.K.Licht LED Mirror Light, Model BKL1112. Please read this manual thoroughly before installation and retain it for future reference.
2. Informació de seguretat
ADVERTIMENT: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the main circuit breaker before installation or maintenance.
- Ensure the power supply is switched off before commencing any work.
- This product is rated IP44, providing protection against splashing water. It is suitable for bathroom zones 2 and 3.
- No modifiqueu el producte de cap manera.
- Mantingueu els materials d'embalatge lluny dels nens.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the entire luminaire shall be replaced.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- 1x B.K.Licht LED Mirror Light (Model BKL1112)
- Maquinari de muntatge (cargols, ancoratges)
- Cable de connexió
4. Instruccions d'instal·lació
The B.K.Licht LED Mirror Light offers versatile installation options: mirror mounting or cabinet mounting.
4.1. Passos generals d'instal·lació
- Prepareu l'àrea d'instal·lació: Ensure the mounting surface is clean, dry, and capable of supporting the light fixture.
- Desconnecteu l'alimentació: Turn off the electricity supply at the main circuit breaker before starting any electrical work.
- Muntar el suport de muntatge: Attach the mounting bracket to the light fixture if it's not pre-assembled.
- Connexió elèctrica: Connect the light fixture's wires to your household electrical wiring. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Use appropriate connectors.
- Assegureu el dispositiu: Mount the light fixture securely using the provided screws and anchors.
- Restaura l'alimentació: Un cop finalitzada la instal·lació i totes les connexions siguin segures, restableu l'alimentació a l'interruptor principal.
Figura 1: Explotat view of the B.K.Licht LED mirror light, showing the main light bar, mounting bracket, and connection point.
Figure 2: Wiring diagram illustrating the connection of the light fixture to the electrical supply. Ensure all connections are secure within the junction box.
4.2. Opcions de muntatge
The fixture can be mounted in two primary ways:
- Mirror Mounting: The light can be clipped onto the top edge of a mirror. The clamp width is approximately 5 mm.
- Muntatge de l'armari: The light can be screwed onto the top of a bathroom cabinet.
Figure 3: Visual guide for both cabinet mounting (Schrankmontage) and mirror mounting (Spiegelmontage) methods.
Figura 4: Example of the B.K.Licht LED mirror light installed directly onto a mirror, providing illumination for the vanity area.
Figura 5: Example of the B.K.Licht LED mirror light installed on top of a bathroom cabinet, illuminating the area below.
5. Instruccions de funcionament
This LED mirror light is designed for simple operation. Once correctly installed and connected to the power supply, it will illuminate when the connected light switch is activated.
- Encès/apagat: Feu servir l'interruptor de paret connectat a la làmpada per encendre o apagar la llum.
- The light provides a neutral white light at 4000 Kelvin, ideal for tasks like makeup application or shaving.
6. Manteniment i cura
To ensure the longevity and optimal performance of your B.K.Licht LED Mirror Light, follow these maintenance guidelines:
- Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau i sec.amp cloth to wipe the surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspecció: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
- Font de llum: The integrated LED light source is not replaceable. If the LEDs fail, the entire fixture must be replaced.
7. Solució De Problemes
If you encounter issues with your LED mirror light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense subministrament elèctric; cablejat solt; interruptor defectuós. | Comproveu l'interruptor. Assegureu-vos que totes les connexions del cablejat estiguin ben fixades. Proveu l'interruptor de paret. |
| La llum parpelleja. | Loose wiring; unstable power supply. | Check wiring connections. Consult an electrician to verify stable power supply. |
| La llum és tènue. | Not applicable for integrated LED; ensure fixture is clean. | Clean the light surface. If dimness persists, the LED module may be failing (requires replacement of entire fixture). |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
8. Especificacions
Figure 6: Diagram showing the dimensions of the B.K.Licht LED mirror light, indicating a width of 300mm.
| Característica | Detall |
|---|---|
| Marca | B.K.Licht |
| Número de model | BKL1112 |
| Dimensions (L x A x A) | 30 x 10.3 x 3.6 cm |
| Pes | 210 grams |
| Classificació de protecció d'entrada (IP). | IP44 (a prova d'esquitxades) |
| Material | Plastic (Chrome finish) |
| Voltage | 230 Volts |
| Consum d'energia | 5 watts |
| Flux lluminós | 500 lm |
| Temperatura de color | 4000 Kelvin (blanc neutre) |
| Vida mitjana | 25,000 hores |
| Font de llum | Integrated LED (non-removable) |
| Eficiència energètica | 100 lúmens/watt |
Figure 7: EU Energy Label for the B.K.Licht LSB-BKL1112, indicating an energy efficiency class E.
For more details, scan the QR code or visit: Informació del producte EPREL
9. Garantia i Suport
B.K.Licht products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact B.K.Licht customer service directly. Keep your proof of purchase for any warranty claims.
