Introducció
Welcome to the S.M.S.L SP200 Headphone Amplifier instruction manual. This document provides essential information for the safe and optimal use of your new THX AAA-888 technology headphone amplifier. Please read this manual thoroughly before operation to ensure proper setup and functionality.
Informació important de seguretat
- Font d'alimentació: Use only the provided AC power supply cable. Ensure the voltage coincideix amb la vostra font d'alimentació local.
- Ventilació: Do not block any ventilation openings. Place the unit in a well-ventilated area to prevent overheating.
- Exposició líquida: Keep the unit away from water, moisture, and other liquids. Do not operate with wet hands.
- Impacte: Eviteu deixar caure la unitat ni sotmetre-la a impactes forts.
- Manteniment: No intenteu desmuntar ni reparar la unitat vosaltres mateixos. Encarregueu tot el manteniment a personal qualificat.
- Col·locació: Col·loqueu la unitat sobre una superfície estable i plana. Eviteu col·locar-la a prop de fonts de calor o sota la llum solar directa.
Contingut del paquet
The S.M.S.L SP200 package includes the following items:
- S.M.S.L SP200 Headphone Ampmés viu
- AC Power Supply Cable
- Manual d'usuari
Producte acabatview
Panell frontal
The front panel of the S.M.S.L SP200 features all necessary controls and headphone outputs for convenient operation.
This image displays the front panel of the S.M.S.L SP200. On the left are the balanced XLR and 6.35mm single-ended headphone output jacks. In the center are toggle switches for power (ON/OFF), input selection (XLR/RCA), and gain control (HIGH/LOW). The large knob on the right is for volume adjustment.
This image provides a detailed, labeled view of the front panel. Key components include: 1. XLR Headphone Output, 2. 6.35mm Headphone Output, 3. Power Status Indicator, 4. Power Switch, 5. Input Selection Switch, 6. Gain Selection Switch, 7. Volume Control.
Panell posterior
The rear panel provides the audio input connections and the power inlet for the ampmés viu.
This image shows the rear panel of the S.M.S.L SP200. From left to right, it features balanced XLR stereo line inputs (Right and Left), unbalanced RCA stereo line inputs (Right and Left), and the AC power inlet.
Instruccions de configuració
Connexió de fonts d'àudio
The SP200 supports both balanced XLR and unbalanced RCA stereo line inputs.
- Entrada XLR: Connect your balanced audio source (e.g., DAC) to the XLR L (Left) and R (Right) input jacks on the rear panel.
- Entrada RCA: Connect your unbalanced audio source to the RCA L (Left) and R (Right) input jacks on the rear panel.
Connexió d'auriculars
The SP200 offers two headphone output options on the front panel.
- Balanced Headphone Output: Use the 4-pin XLR connector for balanced headphones.
- Single-Ended Headphone Output: Use the 6.35mm (1/4 inch) jack for single-ended headphones.
Connexió d'alimentació
Connect the provided AC power cable to the power inlet on the rear panel and then to a suitable power outlet.
This video demonstrates the physical features and connectivity options of the S.M.S.L SP200 headphone amplifier, including its front panel outputs, rear panel inputs, and power connection.
Instruccions de funcionament
Encès/Apagat
Use the "ON/OFF" toggle switch on the front panel to power the unit on or off. The power status indicator will illuminate when the unit is on.
Selecció d'entrada
Select your desired audio input (XLR or RCA) using the "XLR/RCA" toggle switch on the front panel.
Obteniu el control
The "HIGH/LOW" gain switch adjusts the amplification level. Use "LOW" gain for sensitive headphones or when high volume is not required. Switch to "HIGH" gain for less sensitive headphones or when more power is needed.
Ajust de volum
Rotate the large knob on the right side of the front panel to adjust the headphone output volume. Start with a low volume and gradually increase it to a comfortable listening level.
Manteniment
- Neteja: Use a soft, dry cloth to clean the exterior of the unit. Avoid liquid cleaners and abrasive materials.
- Ventilació: Assegureu-vos que hi hagi un flux d'aire adequat al voltant de amplifier. Do not block ventilation openings or place the unit in an enclosed space.
- Emmagatzematge: Store the unit in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity when not in use for extended periods.
Resolució de problemes
- Sense so:
- Check power connection and ensure the unit is turned on.
- Verify input source is correctly connected and selected (XLR or RCA).
- Ensure headphones are properly plugged into the correct output jack.
- Ajusteu el nivell de volum.
- So distorsionat:
- Reviseu els cables d'àudio per si hi ha danys o connexions soltes.
- Ensure the input source is not overdriving the amplifier. Reduce the output level from your source device.
- Try switching gain settings (HIGH/LOW) to match your headphones and source.
- Only One Channel Has Sound:
- Check headphone cable and connection for proper seating.
- Verify the source audio is stereo and not mono.
- Ensure RCA/XLR input cables are correctly connected to both L (Left) and R (Right) channels on the rear panel.
Especificacions tècniques
| Característica | Especificació |
|---|---|
| Mides de l'article L x W x H | 6.3 x 5.87 x 2.87 polzades |
| Voltage | 240 Volts |
| Fabricant | SMSL |
| Volum de subministrament màximtage | 240 Volts |
| Subministrament mínim Voltage | 240 Volts |
| Tipus de muntatge | Muntatge en superfície |
| Marca | SMSL |
| Nombre de canals | 2 |
| Potència de sortida | 12 watts |
| Material | Plàstic |
| Pes de l'article | 1.69 lliures |
| Número de model de l'article | SP200 |
Garantia i Suport
The S.M.S.L SP200 Headphone Amplifier comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact your retailer or S.M.S.L customer service through their official channels.
Si us plau, conserveu el comprovant de compra per validar la garantia.
