Introducció
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Informació de seguretat
Always observe the following safety precautions during installation and use:
- Capacitat de pes: No supereu la capacitat màxima de pes de 40 kg. La sobrecàrrega pot provocar lesions greus o danys materials.
- Estructura de la paret: Ensure the mounting surface (wall) can safely support the combined weight of the mount and the television.
- Llistat UL: This product is UL Listed, indicating it meets specific safety standards.
- Assistència professional: Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un professional qualificat.
- Nens: Mantingueu els nens allunyats de la zona d'instal·lació durant el muntatge.
- Eines: Use appropriate tools and follow all instructions for their safe operation.
Contingut del paquet
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Muntatge de la placa de paret
- Suports per a TV (2 unitats)
- Diversos cargols per a TV (M4, M6, M8)
- Espaciadors i volanderes
- Lag Bolts and Concrete Anchors (for specific wall types)
- Nivell de bombolla
- Clau anglesa
- Plantilla d'instal·lació
Especificacions
| Número de model | 28XTu2564 |
| Marca | MONTAGE |
| Compatibilitat de la mida del televisor | De 26 a 65 polzades |
| Capacitat de pes | 88 lliures (40 kg) |
| Compatibilitat VESA | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Compatibilitat del tipus de paret | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Angle d'inclinació | +5° / -13° |
| Angle de gir | ±45° (Maximum swivel angle depends on TV size) |
| Ajust de nivell | ±3° (Post-installation) |
| Distància a la paret | 3" a 15.7" |
| Material | Acer d'aliatge |
Configuració i instal·lació
Comprovacions prèvies a la instal·lació
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Comproveu el patró VESA del televisor: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Comprova el tipus de paret: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. No instal·leu-ho sol sobre plaques de guix.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Passos d'instal·lació
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Figura 3: Mésview of the 3-Step Easy Installation Process.
Pas 1: connecteu els suports al televisor
- Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta per evitar que es facin malbé la pantalla.
- Align the TV brackets with the mounting holes on the back of your TV.
- Seleccioneu els cargols, les volanderes i els separadors adequats del kit de maquinari que s'adaptin als forats de muntatge del televisor.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
Pas 2: enganxeu la placa de paret a la paret
- Determineu l'alçada i la ubicació desitjades per al televisor.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate.
- Ensure the TV is securely seated on the wall plate.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Instruccions de funcionament
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewangles d'ajust.
Ajustant Viewangle ing
- Inclinació: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewcomoditat.
- Girar: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewing from different areas of the room.
- Extensió: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Nivell: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Manteniment
Un manteniment regular ajuda a garantir la longevitat i el funcionament segur del suport de paret per a televisors.
- Neteja: Netegeu el suport amb un drap suau i sec per eliminar la pols. Eviteu utilitzar netejadors o dissolvents abrasius.
- Comprovacions periòdiques: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Moviment: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Resolució de problemes
If you encounter issues during or after installation, consider the following common solutions:
- TV fora de nivell: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- La muntanya se sent fluixa: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Dificultat d'ajust: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Peces que falten: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Garantia i Suport
MOUNTUP TV wall mount series are backed by a Pla de protecció de 3 anys. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual:
