1. Introducció
This manual provides essential information for the proper installation, maintenance, and understanding of your Land Rover Genuine Front Fender Lower Moulding (Part Number LR079234) for the Range Rover Evoque, Left Hand (LH) side. Please read these instructions carefully before proceeding with any installation or maintenance to ensure correct fitment and optimal performance.
2. Producte acabatview
The Land Rover Genuine Front Fender Lower Moulding is a direct replacement part designed for the Range Rover Evoque. This component is located on the lower section of the front fender on the left-hand side of the vehicle. It is an original new part, ensuring compatibility and quality consistent with Land Rover standards.
Figura 1: Land Rover Genuine Front Fender Lower Moulding (LR079234). This image displays the actual product, a dark-colored plastic moulding designed for the lower front fender of a Range Rover Evoque. It is shown alongside its packaging, which includes the Land Rover part number label.
3. Configuració i instal·lació
Installation of automotive body components requires specific tools and technical knowledge. It is highly recommended that this part be installed by a qualified automotive technician to ensure proper fitment and to avoid damage to the vehicle or the part itself.
3.1. Comprovacions prèvies a la instal·lació
- Verify that the part number LR079234 matches the required part for your Range Rover Evoque LH.
- Inspect the moulding for any shipping damage before installation.
- Ensure the vehicle's fender area where the moulding will be installed is clean and free of debris.
3.2. Installation Procedure (General Guidance)
The following steps are general guidelines. Always refer to the official Land Rover workshop manual for your specific Range Rover Evoque model for detailed, vehicle-specific instructions.
- Carefully remove the existing lower fender moulding, if present. This may involve releasing clips or screws.
- Clean the mounting surface thoroughly to ensure proper adhesion and fitment.
- Align the new LR079234 moulding with the corresponding mounting points on the front left fender.
- Secure the moulding using the appropriate clips, fasteners, or adhesive as specified by the manufacturer. Ensure all attachment points are firmly engaged.
- Gently press along the moulding to ensure it is flush with the fender surface.
Figura 2: Exploded diagram illustrating the assembly of front fender components for a Range Rover Evoque. The diagram highlights various parts, including the fender arch mouldings and lower trim pieces. The specific part LR079234 (indicated as 16A038 in the diagram) is shown in its relative position on the left-hand side of the vehicle's front fender assembly, demonstrating how it integrates with surrounding components.
4. Post-Installation Considerations
After installation, visually inspect the moulding to ensure it is securely attached and properly aligned with the vehicle's body lines. A secure fit prevents rattling and ensures the aesthetic integrity of the vehicle. Avoid washing the vehicle with high-pressure water directly on the newly installed part for at least 24 hours if any adhesive was used, to allow for proper curing.
5. Manteniment
The Land Rover Genuine Front Fender Lower Moulding is designed for durability and requires minimal maintenance. Regular cleaning with standard automotive cleaning products is sufficient to maintain its appearance. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
6. Installation and Fitment Considerations
If you encounter any difficulties during installation or if the part does not fit correctly, do not force it. Incorrect installation can lead to damage to the part or the vehicle. In such cases:
- Double-check the part number against your vehicle's requirements.
- Review the installation steps in the official Land Rover workshop manual.
- Contact a certified Land Rover service center or the seller for assistance.
7. Especificacions
| Atribut | Detall |
|---|---|
| Marca | Land Rover |
| Número de model | LR079234 |
| Número de peça del fabricant | LR079234X1 |
| Posició de peces d'automòbil | Front, Left Hand (LH) |
| Tipus d'ajust | Vehicle Specific Fit (Range Rover Evoque) |
| Pes de l'article | 8 unces |
| Acabat exterior | White (Note: Product image shows dark grey/black) |
Note: The 'Exterior Finish' listed as 'White' in some specifications may refer to a base material or a general category. The actual product is typically dark grey or black as shown in Figure 1.
8. Garantia i Suport
8.1. Política de devolució
This product is subject to a 30-day return policy for refund or replacement, as per the seller's terms. Please refer to your purchase documentation for specific details regarding returns.
8.2. Atenció al client
For technical assistance, installation queries, or warranty claims, please contact the authorized Land Rover service center or the original seller from whom the product was purchased. Provide your purchase details and the part number (LR079234) for efficient support.
