Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Puig Rear Mirror MOD. HYPERNAKED NO HOMOLOG. Left C/Black. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Informació important de seguretat
ADVERTIMENT: Aquest producte és NOT homologated. This means it may not comply with specific regulatory standards for road use in all regions. It is the user's responsibility to ensure compliance with local laws and regulations regarding motorcycle accessories. Always wear appropriate safety gear when operating a motorcycle.
Improper installation or adjustment can lead to loss of control or accidents. If you are unsure about any step, consult a qualified motorcycle mechanic.
Contingut del paquet
Si us plau, comproveu que tots els components siguin presents abans de començar la instal·lació.
- 1 x Puig Rear Mirror MOD. HYPERNAKED (Left, Black)
- Mounting hardware (as per included instructions sheet)
- Instruction Sheet (refer to this manual for detailed guidance)
Configuració i instal·lació
The Puig HYPERNAKED mirror is designed for handlebar-end mounting. Ensure your motorcycle's handlebar is compatible with this type of mirror attachment.
- Preparació: Ensure the motorcycle is stable on its stand. Turn off the engine. Gather necessary tools (e.g., Allen wrenches, torque wrench).
- Remove Existing Mirror (if applicable): Carefully remove any existing left-side mirror from the handlebar. Keep all original parts in case you need to reinstall them.
- Handlebar End Preparation: If your handlebar has an existing bar-end weight or plug, remove it. The Puig mirror typically mounts directly into the hollow end of the handlebar or uses an adapter for solid handlebars.
- Muntatge del mirall: The mirror arm and head may come partially assembled. Ensure all pivot points are finger-tight but not fully torqued down yet.
- Muntatge del mirall: Insert the mirror's mounting mechanism into the left handlebar end. Depending on the specific mounting hardware provided, this may involve an expansion sleeve or a direct bolt-in. Tighten the mounting bolt gradually until the mirror is securely seated. No apretar massa.
- Ajust inicial: Loosely adjust the mirror arm and head to a preliminary position that allows for a clear rear view.
- Ajustament final: Once the mirror is in a satisfactory position, carefully tighten all pivot bolts on the mirror arm and head. Ensure they are firm enough to hold the mirror in place during riding but allow for minor adjustments if needed. Refer to the included instruction sheet for specific torque specifications if provided.
Figure 1: The Puig HYPERNAKED mirror installed on a motorcycle handlebar, showcasing its adjustable arm and sleek design.
Figura 2: Detall view of the mirror's mounting on the handlebar, adjacent to the motorcycle's hand controls.
Figure 3: A standalone view of the Puig HYPERNAKED mirror, illustrating its full profile and the textured carbon-look finish on the mirror housing.
Funcionament i ajust
The Puig HYPERNAKED mirror offers multiple points of adjustment to optimize your rear view.
- Ajust de l'angle del braç: The mirror arm can be pivoted at its base where it connects to the handlebar mount. Loosen the bolt at this pivot point, adjust the arm to the desired angle, and then re-tighten securely.
- Mirror Head Angle Adjustment: The mirror head itself can be tilted and rotated relative to the arm. Loosen the bolt connecting the mirror head to the arm, position the mirror for optimal rear visibility, and then tighten the bolt firmly.
- Camp de View: While riding, ensure the mirror provides a clear and wide view of the road behind you. Adjust as necessary.
Figure 4: The mirror positioned on a motorcycle, demonstrating its ergonomic placement for rider visibility.
Manteniment
Regular maintenance will ensure the longevity and optimal performance of your Puig mirror.
- Neteja: Clean the mirror glass and housing with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the anodized finish or mirror surface.
- Inspecció: Periodically check all bolts and pivot points for tightness. Vibrations from riding can cause fasteners to loosen over time. Re-tighten any loose bolts to prevent mirror movement or detachment.
- Anodized Finish: The mirror features an anodized finish for durability and aesthetics. To maintain its appearance, avoid scratching or abrasive contact.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Mirror vibrates excessively | Loose mounting bolts or pivot points. | Check and tighten all mounting and adjustment bolts. Ensure the mirror is securely seated in the handlebar end. |
| Mirror does not hold position | Pivot bolts are not tight enough. | Tighten the bolts at the mirror arm and head pivot points until the mirror holds its position firmly. |
| Poor rear visibility | Incorrect mirror angle or position. | Adjust the mirror arm and head angles to achieve optimal rear view. Ensure no part of your body or motorcycle obstructs the view. |
| Mirror feels loose in handlebar | Improper handlebar end mounting. | Re-check the installation steps for handlebar mounting. Ensure the expansion mechanism (if applicable) is fully engaged and tightened. |
| Scratches on anodized finish | Abrasive cleaning materials or impact. | Use only soft cloths and mild cleaners. Avoid contact with sharp objects. Scratches on anodized surfaces are typically permanent. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Puig |
| Model | Puig 9884N |
| Número de part | 9884 N |
| Color | Negre |
| Posició de peces d'automòbil | Esquerra |
| Tipus de muntatge | Handlebar End Mount |
| Característica especial | Not Homologated |
| Dimensions del producte (L x A x A) | 14.17 x 4.45 x 2.17 polzades (36 cm x 11.3 cm x 5.5 cm) |
| Pes de l'article | 14.8 unces |
| Lens Curvature | Pis |
| Acabat exterior | Painted (Anodized) |
Garantia i Suport
Specific warranty information for the Puig Rear Mirror MOD. HYPERNAKED NO HOMOLOG. Left C/Black is not provided in this document. For details regarding warranty coverage, technical support, or replacement parts, please contact Puig directly or refer to their official weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
Puig Official Weblloc: www.puig.tv
