WORKPRO 7.2V Cordless Hedge Trimmer and Grass Shear User Manual

1. Introducció

Thank you for choosing the WORKPRO 7.2V Cordless Hedge Trimmer and Grass Shear. This versatile 2-in-1 tool is designed for efficient and convenient garden maintenance, allowing you to easily switch between grass cutting and hedge trimming tasks. Its lightweight design and cordless operation provide maximum maneuverability. Please read this manual thoroughly before operation to ensure safe and effective use of the product.

2. Instruccions de seguretat

ADVERTÈNCIA: llegiu totes les instruccions i advertències de seguretat. El no seguir les advertències i instruccions pot provocar descàrregues elèctriques, incendis i/o lesions greus.

Seguretat general

• Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and sturdy footwear, when operating the tool.
• Mantingueu els nens i els espectadors allunyats mentre feu servir l'eina. Les distraccions poden fer que perdis el control.
• No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Eviteu l'arrencada accidental. Assegureu-vos que l'interruptor estigui en la posició d'apagada abans de connectar la bateria, agafar o transportar l'eina.
• Mantingueu l'eina ben subjectada amb les dues mans durant el funcionament.

Seguretat de la bateria

• Recarregueu només amb el carregador especificat pel fabricant.
• Do not expose battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C (265°F) may cause explosion.
• No curtcircuiteu els terminals de la bateria.
• Emmagatzemeu la bateria en un lloc fresc i sec, lluny de la llum solar directa.

Seguretat de la fulla

• Keep hands and feet away from cutting blades.
• Ensure the safety key is removed when the tool is not in use or when changing blades.
• Inspect blades for damage before each use. Do not use if blades are bent or cracked.
• Always use the correct blade for the intended task (grass shear for grass, hedge trimmer for hedges).

3. Components mésview

Familiarize yourself with the main components of your WORKPRO Cordless Hedge Trimmer and Grass Shear:

Figure 3.1: Key Components of the Tool

• Empunyadura ergonòmica: Dissenyat per a un maneig còmode i segur.
• Charger LED-indicator: Mostra l'estat de càrrega de la bateria.
• Clau de seguretat: A removable key that disengages the battery for enhanced safety, especially around children.
• Grass Cutter Blade: 90mm wide blade for trimming grass and small weeds.
• Interruptor d'encesa/apagada: Activa i desactiva l'eina.
• Bloqueig de seguretat: Prevents accidental starting of the tool.
• Blade Quick Release System: Allows for easy and quick blade changes.
• Drive Cover Release Button: Used to open the drive cover for blade removal/installation.

4. Configuració

4.1 Càrrega de la bateria

The tool is equipped with a 7.2V, 1500mAh Lithium-ion battery. Before first use, or after extended storage, fully charge the battery.

1. Ensure the tool is switched OFF.
2. Connecteu el carregador a una presa de corrent estàndard.
3. Insert the charger plug into the charging port on the tool. The LED indicator on the charger will illuminate to show charging status.
4. Allow approximately 3 hours for a full charge. The LED indicator will change or turn off when charging is complete.

Figure 4.1: Tool with Charger and Blades

4.2 Installing and Changing Blades

The tool comes with two interchangeable blades: a grass shear blade and a hedge trimmer blade. Always ensure the security key is removed before changing blades.

Figure 4.2: Blade Dimensions

1. Remove Security Key: Pull out the security key from its slot to prevent accidental activation.
2. Open Drive Cover: Press the Drive Cover Release Button and lift the drive cover.
3. Remove Current Blade (if applicable): Carefully lift the installed blade from its position.
4. Instal·leu la nova fulla: Align the new blade (either grass shear or hedge trimmer) with the drive mechanism and gently press it into place until it clicks securely.
5. Close Drive Cover: Lower the drive cover until it snaps shut.
6. Insert Security Key: Re-insert the security key into its slot. The tool is now ready for use.

Figure 4.3: Blade Changing Procedure

5. Instruccions de funcionament

5.1 Funcionament general

1. Ensure the security key is fully inserted.
2. To start the tool, press and hold the Safety Lock button, then press the ON/Off Switch. Release the Safety Lock button once the tool starts.
3. To stop the tool, release the ON/Off Switch.

5.2 Grass Trimming (with Grass Shear Blade)

Use the 90mm grass shear blade for precise trimming of grass edges, small patches of lawn, or around obstacles.

• Hold the tool firmly with the grass shear blade parallel to the ground.
• Move the tool slowly and steadily along the area to be trimmed.
• Avoid forcing the blade through thick or wet grass, as this can strain the motor and reduce battery life.

Figure 5.1: Grass Trimming in Progress

5.3 Hedge Trimming (with Hedge Trimmer Blade)

Use the 120mm hedge trimmer blade for shaping and pruning small hedges, shrubs, and bushes.

• Hold the tool firmly with the hedge trimmer blade positioned at the desired cutting angle.
• Move the tool in a smooth, sweeping motion across the hedge.
• Do not attempt to cut branches thicker than 8mm (tooth distance).
• For best results, trim small amounts at a time rather than attempting to cut large sections at once.

Figure 5.2: Hedge Trimming in Progress

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim de la vostra eina.

6.1 Neteja

• Always remove the security key and disconnect the charger before cleaning.
• Use a stiff brush or cloth to remove grass clippings and debris from the blades and housing.
• Apply a light coat of machine oil to the blades after each use to prevent rust and ensure smooth operation.
• Do not use water or abrasive cleaners on the tool.

6.2 Emmagatzematge

• Store the tool and charger in a dry, secure location, out of reach of children.
• Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.
• Store the blades with their protective covers on to prevent accidental injury and blade damage.

7. Solució De Problemes

Si teniu problemes amb l'eina, consulteu els següents problemes i solucions habituals:

8. Especificacions

9. Garantia i Suport

WORKPRO products are manufactured to high-quality standards. For any questions, technical assistance, or warranty claims, please contact WORKPRO customer support. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the contact information provided with your product packaging or visit the official WORKPRO weblloc.