Unitech MS652

Manual d'usuari de la bateria recarregable Unitech MS652 de 800 mAh

Model: MS652 Battery (Part Number: 1400-900050G)

1. Introducció

This manual provides essential instructions for the safe and effective use of your Unitech MS652 800mAh rechargeable battery. Please read this manual thoroughly before using the battery to ensure proper operation and to prevent damage or injury.

2. Producte acabatview

The Unitech MS652 800mAh battery is a genuine replacement or spare battery designed specifically for the Unitech MS652 ring scanner. It provides reliable power to ensure continuous operation of your device.

Unitech MS652 800mAh Battery

Figura 1: Unitech MS652 800mAh Battery. This image shows the black rectangular battery pack with a grey latch mechanism at the top, designed to fit into the Unitech MS652 ring scanner.

3. Configuració i instal·lació

Follow these steps to install the battery into your Unitech MS652 ring scanner:

  1. Apagueu el dispositiu: Ensure your Unitech MS652 ring scanner is completely powered off before attempting battery installation or removal.
  2. Localitzeu el compartiment de la bateria: Identify the battery compartment on your MS652 scanner. Refer to your scanner's user manual for exact location if unsure.
  3. Compartiment obert: Carefully open the battery compartment cover. This may involve sliding a latch or unscrewing a small screw, depending on the scanner model.
  4. Insereix la bateria: Align the battery with the contacts inside the compartment. Gently push the battery into place until it clicks or sits securely. Ensure the grey latch mechanism on the battery aligns with the scanner's locking mechanism.
  5. Compartiment tancat: Substituïu la tapa del compartiment de la bateria i fixeu-la.
  6. Càrrec inicial: Per a un rendiment òptim, carregueu completament la bateria abans del primer ús.

4. Instruccions de funcionament

The Unitech MS652 800mAh battery is designed for seamless integration with your MS652 ring scanner.

  • Càrrega: Use only the charger supplied or approved by Unitech for the MS652 scanner. Connect the scanner with the installed battery to the charger. The charging indicator on the scanner will typically show the charging status.
  • Primer ús: It is recommended to fully charge the battery before its initial use to calibrate the battery meter and ensure maximum capacity.
  • Ús normal: The battery will power your MS652 scanner during operation. Monitor the battery level indicator on your scanner to determine when recharging is necessary.
  • Durada de la bateria: Battery life varies depending on usage patterns, scanner settings, and environmental conditions.

5. Manteniment

Un manteniment adequat pot allargar la vida útil de la bateria:

  • Càrrega regular: Avoid completely draining the battery frequently. Recharge it when the device indicates low power.
  • Emmagatzematge: If storing the battery for an extended period, charge it to approximately 50% and store it in a cool, dry place (between 0°C and 25°C or 32°F and 77°F). Avoid extreme temperatures.
  • Neteja: Keep battery contacts clean. Use a dry, soft cloth to wipe away any dust or debris.
  • Eviteu danys físics: No deixeu caure, punxeu ni desmunteu la bateria.

6. Solució De Problemes

Si teniu problemes amb la bateria, tingueu en compte el següent:

  • La bateria no es carrega:
    • Ensure the charger is properly connected to both the power source and the scanner.
    • Verify that the charger is the correct one for your Unitech MS652 scanner.
    • Comproveu si la bateria o el carregador tenen danys visibles.
    • Clean the battery contacts on both the battery and the scanner.
  • Durada de la bateria curta:
    • Assegureu-vos que la bateria estigui completament carregada abans d'utilitzar-la.
    • Reduce screen brightness or disable unnecessary features on the scanner to conserve power.
    • If the battery is old, its capacity may have degraded over time. Consider replacing it.
  • El dispositiu no s'encén:
    • Confirm the battery is correctly installed and fully charged.
    • Try a different, known-good battery if available.

If problems persist, contact Unitech customer support for assistance.

7. Especificacions

CaracterísticaDetall
MarcaUnitech
Compatibilitat de modelsUnitech MS652 Ring Scanner
Tipus de bateriaRecarregable
Capacitat800 mAh (Milliamp hores)
Número de part1400-900050G
Pes de l'articleAproximadament 3.92 unces
Recompte d'unitats1 recompte

8. Informació de seguretat

Observeu les següents precaucions de seguretat per evitar lesions o danys:

  • Utilitzeu carregadors aprovats: Only use chargers specifically designed and approved for the Unitech MS652 scanner and its battery. Using incompatible chargers can cause fire, explosion, or other hazards.
  • Eviteu temperatures extremes: Do not expose the battery to extreme heat (e.g., direct sunlight, near heaters) or cold. High temperatures can cause the battery to overheat, swell, or explode. Low temperatures can significantly reduce battery performance.
  • No desmunteu: Never attempt to disassemble, puncture, or modify the battery. This can lead to short circuits, fire, or exposure to hazardous materials.
  • Eliminació adequada: Do not dispose of batteries in household waste. Follow local regulations for proper disposal of rechargeable batteries. Many retailers and recycling centers offer battery recycling programs.
  • Mantenir allunyat de l'aigua: No submergiu la bateria en aigua ni l'exposeu a una humitat excessiva.
  • Mantenir allunyat dels nens: Guardeu les piles fora de l'abast dels nens.
  • Manejar amb cura: Eviteu deixar caure la bateria o sotmetre-la a impactes forts.

9. Garantia i Suport

For warranty information or technical support regarding your Unitech MS652 800mAh battery or compatible device, please refer to the documentation provided with your Unitech MS652 ring scanner or visit the official Unitech website. You may also contact Unitech customer service directly for assistance.

Unitech Official Weblloc: www.unitech.com

Documents relacionats - MS652

Preview Manual d'usuari de l'escàner d'anells 2D Unitech MS652Plus Wearable
Manual d'usuari complet per a l'escàner d'anell 2D portàtil Unitech MS652Plus, que detalla la configuració, el funcionament, el manteniment, el compliment normatiu i les funcions d'escaneig avançades per als models MS652-AUDB00-SG i MS652-AUDB00-1G.
Preview Guia d'inici ràpid de l'escàner d'anells 2D Unitech MS652Plus Wearable
Una guia d'inici ràpid per a l'escàner d'anell 2D portàtil Unitech MS652Plus, que cobreix la càrrega, els mètodes d'emparellament (NFC, Bluetooth HID, Bluetooth SPP), les proves, els consells i les opcions de configuració per a la informació del sistema, les dades i la memòria, el control del bip, el mode de funcionament, el control del vibrador i l'apagada automàtica.
Preview Manual d'usuari de l'escàner d'anells 2D Unitech MS652 Wearable
Manual d'usuari de l'escàner circular 2D Unitech MS652 Wearable, que detalla la instal·lació, el funcionament, el manteniment, el compliment normatiu (FCC, CE, RoHS, WEEE, NCC) i les directrius de seguretat per a l'ús de làser, LED, bateria i adaptador.
Preview Manual d'usuari de l'escàner d'anells 2D Unitech MS652 Wearable | Instal·lació, funcionament, especificacions
Manual d'usuari complet per a l'escàner d'anells 2D Unitech MS652 Wearable, que detalla la instal·lació, el funcionament, les especificacions, la compatibilitat amb la simbologia, la configuració de les comandes i el compliment normatiu per a una captura de dades eficient.
Preview Manual de programació d'Android Unitech per a EA630/EA520/PA760/HT730
Aquest manual proporciona una guia completa sobre la programació de dispositius Unitech, concretament els models EA630, EA520, PA760 i HT730, mitjançant Unitech Scan Service (USS) per a Android. Cobreix temes essencials com ara iniciar i gestionar l'USS, gestionar la recepció de dades de codis de barres, configurar els paràmetres de l'escàner i utilitzar l'API de la bateria Unitech. La guia inclou...ample code in both Java and Kotlin for seamless integration into Android applications, enabling developers to efficiently control barcode scanning functionalities and access device data.
Preview Guia d'inici ràpid de l'escàner de codis de barres làser sense fil Unitech MS836B 2.4G
Guia d'inici ràpid per a l'escàner de codis de barres làser sense fil Unitech MS836B 2.4G, que cobreix la configuració, els modes de funcionament, la connectivitat i la configuració bàsica.