DENALI D7 LED Light Pod with DataDim Technology
Manual d'instruccions
1. Producte acabatview
The DENALI D7 LED Light Pod is a high-intensity auxiliary lighting solution designed for various applications, particularly suitable for vehicles requiring powerful illumination. With over 7,500 lumens, the D7 light pod is engineered to provide exceptional brightness and beam distance, enhancing visibility and safety.
This light pod features seven high-intensity 10-watt Cree LEDs, precisely focused through a proprietary single-piece optic. This design creates a full-bodied spot beam capable of reaching over 1200 feet at one lux. The robust heatsink and Active Thermal Management system ensure the lamp maintains optimal operating temperature, preventing light output degradation due to overheating.
Figura 1: Frontal view of the DENALI D7 LED Light Pod, showcasing its seven high-intensity LED lenses and durable black housing.
2. Característiques clau
- High-Intensity Illumination: Equipped with 7x 10 Watt Cree XPL HI LEDs, delivering 7665 raw lumens per pod for superior brightness.
- Construcció duradora: Features DrySeal Submersible Waterproof design, allowing the light to withstand extreme environmental conditions.
- Impact-Resistant Bezels: Utilizes Impact PC Polycarbonate bezels that resist cracking, fading, and corrosion, unlike traditional aluminum bezels.
- Advanced Thermal Management: LiveActive Thermal Management system actively cools the LEDs, preventing overheating and maintaining consistent light output.
- Optimized Beam Performance: Engineered with a proprietary single-piece optic to produce a focused spot beam with a distance of 1205 feet and a width of 125 feet.
- DataDim Compatible: Designed for seamless integration with DataDim technology for advanced lighting control.
- Disseny compacte: Pro baixfile mounting bracket included, along with stainless steel hardware for secure installation.
3. Especificacions tècniques
| Especificació | Valor |
|---|---|
| LEDs | 7x 10 Watt Cree XPL HI |
| Sorteig de poder | 5 Amps |
| Lúmens bruts | 7665 per pod |
| Distància del feix | 1205 peus |
| Perfil del marc | 125 peus |
| DataDim Compatible | Sí |
| Vol. Operatiutage | 12 VDC |
| Pod Size | 4.4" Round x 3.9" Deep |
| Pod Weight | 1.8 lliures |
| Classificació impermeable | IP67 (Waterproof & Submersible) |
| Certificació | E Mark Approved Spot Lens |
| Pes de l'article (paquet) | 4.4 lliures |
| Número de peça del fabricant | DNL.D7.050 |
| UPC | 810005872027 |
4. Contingut del paquet
Each DENALI D7 LED Light Pod package typically includes the following components:
- (1x) DENALI D7 LED Light Pod
- (1x) Hinge Mount with M8 Stainless Steel Hardware
- (1x) Wiring Pigtail
Note: Contents may vary slightly based on specific product bundles or regional packaging.
5. Guia d'instal·lació
5.1 Precaucions de seguretat
- Ensure the vehicle's power is disconnected before beginning installation to prevent electrical shock or short circuits.
- Utilitzeu equips de protecció individual (EPI) adequats, com ara ulleres i guants de seguretat.
- If unsure about any step, consult a qualified professional.
5.2 Mounting the Light Pod
- Identify a suitable mounting location on your vehicle. The D7 light pod is designed for various applications, including motorcycles and off-road vehicles.
- Attach the provided hinge mount to the light pod using the M8 stainless steel hardware. Ensure the hardware is tightened securely.
- Secure the mounted light pod to your chosen location on the vehicle. Use appropriate tools to tighten all fasteners, ensuring the light is stable and will not vibrate loose during operation.
Figure 2: Two DENALI D7 LED Light Pods mounted on the front of a motorcycle, demonstrating a typical installation setup for enhanced visibility.
5.3 Instruccions de cablejat
- Connect the wiring pigtail from the D7 light pod to your vehicle's electrical system. Refer to your vehicle's service manual for specific wiring diagrams and fuse box locations.
- Ensure all connections are secure and properly insulated to prevent short circuits and corrosion.
- If utilizing DataDim technology, follow the specific wiring instructions provided with your DataDim controller (sold separately) for integrated dimming functionality.
- Test the light pod functionality before fully reassembling any removed vehicle components.
6. Instruccions de funcionament
The DENALI D7 LED Light Pod operates on a 12 VDC system. Once properly installed and wired, the light pod can be activated via your vehicle's auxiliary light switch or integrated control system.
6.1 Basic On/Off Operation
Activate the light pod by turning on the connected switch. Ensure the vehicle's ignition is in the 'ON' position or the engine is running, depending on your wiring configuration.
6.2 DataDim Functionality (If Applicable)
If your D7 light pod is connected to a DENALI DataDim controller, you can control the light intensity. The DataDim controller allows for seamless switching between high and low beam settings using your vehicle's original high beam switch. Refer to the DataDim controller's specific manual for detailed operation and programming instructions.
Note: The D7 light pod is designed to work with DataDim technology, but the DataDim controller is typically sold separately.
7. Cura i Manteniment
Proper care and maintenance will ensure the longevity and optimal performance of your DENALI D7 LED Light Pod.
- Neteja: Regularly clean the lens and housing with a soft cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate bezel or lens. Rinse thoroughly with clean water.
- Inspecció: Periodically inspect the mounting hardware and wiring connections for any signs of loosening, corrosion, or damage. Tighten any loose fasteners and repair or replace damaged wiring as needed.
- Impermeabilització: The D7 light pod features DrySeal Submersible Waterproof technology. While designed to withstand harsh conditions, avoid directing high-pressure water jets directly at the light for extended periods, especially near cable entry points.
- Gestió tèrmica: Ensure the heatsink fins are free from dirt, mud, or debris to allow for proper heat dissipation. The LiveActive Thermal Management system relies on airflow to keep the LEDs cool.
8. Solució De Problemes
If you encounter issues with your DENALI D7 LED Light Pod, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power, loose connection, blown fuse, faulty switch. |
|
| La llum és tènue o parpelleja. | Vol insuficienttage, poor ground connection, overheating. |
|
| Humitat dins de la lent. | Deteriorament del segellat, canvis extrems de temperatura. |
|
If the problem persists after attempting these solutions, please contact DENALI customer support.
9. Informació de la garantia
DENALI products are manufactured to high standards and are typically backed by a manufacturer's warranty. Specific warranty terms, conditions, and duration may vary. Please retain your proof of purchase for warranty claims.
For detailed warranty information, including coverage, limitations, and the claims process, please refer to the official DENALI website or contact their customer support directly. As per Amazon's policy, a 30-day return/replacement policy may apply from the date of purchase.
10. Atenció al client
For further assistance, technical support, or inquiries regarding your DENALI D7 LED Light Pod, please contact DENALI Electronics customer support.
- Fabricant Weblloc: Visit the official DENALI Electronics weblloc web amb informació sobre productes, preguntes freqüents i recursos d'assistència.
- Botiga Amazon: També podeu visitar el DENALI Store on Amazon for product details and seller contact information.
When contacting support, please have your product model number (DNL.D7.050) and proof of purchase readily available.
