Producte acabatview
The Fractal Design Meshify 2 is a high-performance computer case designed with a bold, stealth-inspired aesthetic. It features a striking exterior with bolt-free, flush tempered glass, offering excellent interior access. The case boasts a fully redesigned front panel with USB-C connectivity, a hinged mesh panel, and a removable nylon filter. Its flexible dual-layout interior supports large storage arrays and multi-radiator setups, ensuring efficient cooling. Key features include iconic angular mesh for filtered airflow, an adaptable interior fitting up to 285 mm E-ATX motherboards, and support for radiators up to 360 mm (front), 420 mm (top), and 280 mm (base). The case can hold up to 11 HDDs along with 4 SSD mounts (9 brackets included).
Configuració i instal·lació
Desembalatge i inspecció inicial
Upon unboxing, inspect the case for any damage. The Meshify 2 comes with an accessories box containing drive trays, a user guide, and various screws necessary for component installation. The side panels, including the tempered glass panel, are designed for easy removal, facilitating access to the interior.
E / S del tauler frontal
The top-front panel features essential input/output ports for convenient access. These include headphone and microphone jacks, a USB-C port, a power button, a reset button, and two USB 3.0 ports. Ensure all front panel cables are correctly connected to your motherboard during setup.
Instal·lació de font d'alimentació
The power supply is installed at the rear bottom of the case using a removable bracket. Secure the power supply to this bracket outside the case, then slide the assembly into the designated compartment and fasten it with screws.
Motherboard and GPU Installation
The Meshify 2 supports motherboards up to Extended ATX (E-ATX) and graphics cards up to 467mm in length. The case offers a modular internal layout, allowing for adjustments to accommodate various component sizes. Vertical GPU mounting is possible but requires a separately purchased riser cable.
Funcionament de la caixa
Fan Control and Cable Management
The case includes a Nexus+ 2 Slim fan controller, supporting three PWM fans and six 3-pin fans. This controller is strategically placed at the top-rear of the motherboard tray to facilitate clean cable routing. Cable management straps are also provided to help organize internal wiring.
Instal·lació de la unitat d'emmagatzematge
The Meshify 2 offers versatile storage options. It includes two removable SSD mounts on the backside of the motherboard tray and a universal multi-bracket that can accommodate 3.5-inch hard drives or pump mounts. The case supports up to 11 HDDs and 4 SSDs with included brackets, and additional trays can be purchased for further expansion.
Manteniment
Cleaning Dust Filters
To maintain optimal airflow and prevent dust buildup, regularly clean the dust filters located at the bottom, front, and top of the case. The bottom filter is easily removable by sliding it out from the front. The front mesh panel is hinged and can be opened to access its removable nylon filter. The top panel can also be detached to clean the filter and access the cooling bracket underneath.
Resolució de problemes
- Sense energia: Ensure all power connections are secure, including the power supply unit (PSU), the 24-pin ATX connector to the motherboard, and the 8-pin CPU power connector. Verify that the power button cable is correctly attached to the motherboard's front panel headers.
- Sobreescalfament: Check that all case fans are properly connected and oriented for optimal airflow. Clean all dust filters regularly. Ensure no cables are obstructing airflow paths within the case.
- Ports USB/àudio no funcionen: Confirm that the front panel I/O cables (USB 3.0, USB-C, HD Audio) are securely connected to the corresponding headers on your motherboard.
- Problemes d'ajustament dels components: Refer to the 'Technical Specifications' section for maximum dimensions of graphics cards, CPU coolers, and power supplies. Utilize the modular internal layout options to create more space if necessary.
- Problemes generals: For specific component-related problems, consult the individual manuals for your motherboard, graphics card, and other hardware.
Especificacions tècniques
- Nom del model: FD-C-MES2A-04
- Dimensions (LxWxH): 21.34 x 9.45 x 18.66 polzades
- Pes de l'article: 23.1 lliures (10.5 quilograms)
- Color: Gray TG Light
- Material: Vidre temperat
- Compatibilitat de la placa base: ATX estès
- Tipus de cas: Torre mitja
- Mètode de refrigeració: Aire
- Power Supply Mounting Type: Muntatge posterior
- Ports d'E/S frontals: 2x USB 3.0, 1x USB-C, Headphone Jack, Microphone Jack, Power Button, Reset Button
- Suport del radiador: Up to 360 mm (front), 420 mm (top), 280 mm (base)
- Baies en cotxe: Up to 11 HDDs, 4 SSD mounts (9 brackets included)
- Included Fans: 3 x 140mm fans
- Fan Controller: Nexus+ 2 Slim fan controller (supports 3 PWM fans, 6 3-pin fans)
