Wiltec Sliding Door System - 183 cm Rail for 1 Door - Model 61810 Instruction Manual

1. Introducció

This manual provides comprehensive guidance for the Wiltec Sliding Door System, Model 61810. This system is designed to facilitate the installation and operation of a single sliding door, optimizing space and providing a functional solution for various interior applications. It is compatible with doors between 35 and 40 mm thick and weighing up to 90 kg. The system includes a 183 cm rail, wall brackets, rollers, end stops, anti-lift devices, and a floor guide. Please note that the door itself is not included and must be purchased separately.

The Wiltec Sliding Door System offers a discreet and functional solution for space optimization, suitable for separating rooms, covering wall niches, or as a door for shelves and cabinets. Its design allows for smooth movement without the swing of traditional doors, enhancing freedom of movement within your space.

2. Informació de seguretat

• Llegiu atentament totes les instruccions abans de la instal·lació i l'ús.
• Ensure all components are securely fastened according to the instructions to prevent accidents.
• Do not exceed the maximum weight capacity of 90 kg for the door.
• Verify that the wall structure can support the weight of the door and the sliding system.
• Mantingueu els nens i les mascotes allunyats de la zona d'instal·lació.
• Wear appropriate safety gear (gloves, eye protection) during installation.

3. Contingut del paquet

Please verify that all components listed below are present and undamaged before beginning installation.

• 1x Sliding Rail (183 cm length)
• 4x Suports de paret
• 2x Rollers (Hangers)
• 2x End Stops
• 2x Anti-Lift Devices
• 1x Floor Guide
• Maquinari de muntatge (cargols, ancoratges, etc.)

Figura 1: Acabatview of all components included in the Wiltec Sliding Door System package. This image displays the 183 cm rail, two rollers, four wall brackets, two end stops, two anti-lift devices, a floor guide, and various mounting screws and anchors.

4. Configuració i instal·lació

This section outlines the steps for installing your Wiltec Sliding Door System. Professional installation is recommended if you are unfamiliar with construction or carpentry.

1. Prepara el mur: Ensure the wall where the rail will be mounted is structurally sound and capable of supporting the combined weight of the door and the system. Locate wall studs or use appropriate heavy-duty anchors.
2. Mark Rail Position: Determine the desired height for your door. The rail should be mounted at a height that allows the door to clear the floor by approximately 10-15 mm, considering the height of the rollers. Mark the drilling points for the wall brackets along the 183 cm rail.
3. Install Wall Brackets and Rail: Drill pilot holes at the marked positions. Secure the wall brackets to the wall using the provided screws and anchors. Attach the 183 cm sliding rail to the wall brackets, ensuring it is level.
4. Attach Rollers to Door: Mount the two rollers to the top edge of your door. Ensure they are evenly spaced and securely fastened. The door should be between 35 mm and 40 mm thick.
5. Penja la porta: Carefully lift the door and hook the rollers onto the sliding rail.
6. Install End Stops: Position the end stops at both ends of the rail to prevent the door from sliding off. Adjust their position to control the door's travel range.
7. Install Anti-Lift Devices: Attach the anti-lift devices to the top of the door, above the rollers. These prevent the door from accidentally lifting off the rail.
8. Guia d'instal·lació del sòl: Position the floor guide on the floor directly below the rail, ensuring it aligns with the groove or channel on the bottom edge of your door. Secure it to the floor. This guide prevents the door from swinging outwards.

Figura 2: Un example of the Wiltec Sliding Door System installed with a white door, demonstrating the rail, rollers, and the door's position when closed and open. This image illustrates the final appearance and functionality of the system.

5. Instruccions de funcionament

The Wiltec Sliding Door System is designed for smooth and quiet operation. To open or close the door, simply grasp the door handle (if installed) and gently slide the door along the rail. The rollers will glide smoothly, and the floor guide will keep the door stable. Avoid forcing the door, as this can cause unnecessary wear on the components.

6. Manteniment

Regular maintenance ensures the longevity and smooth operation of your sliding door system.

• Neteja: Periodically wipe down the rail and rollers with a soft, damp drap per eliminar la pols i les restes. Eviteu productes de neteja abrasius.
• Lubricació: If the door's movement becomes stiff or noisy, apply a small amount of silicone-based lubricant to the roller bearings and the top surface of the rail. Do not use oil-based lubricants, as they can attract dust.
• Comprovació dels elements de fixació: Annually inspect all screws and bolts for tightness. Tighten any loose fasteners to ensure the system remains secure.
• Inspeccionar components: Check rollers, end stops, and the floor guide for any signs of wear or damage. Replace any worn or damaged parts immediately.

7. Solució De Problemes

8. Especificacions

• Marca: WilTec
• Model: 61810
• Longitud del carril: 183 cm
• Pes màxim de la porta: 90 kg
• Gruix de la porta compatible: 35 - 40 mm
• Material: High-quality iron (black finish)
• Dimensions del producte (L x A x A): 14.5 x 7.8 x 96.9 cm (packaging/component dimensions)
• Pes de l'article: 5.98 kg
• Color: Negre
• Estil: Clàssic

Figura 3: Technical drawing illustrating key dimensions of the Wiltec Sliding Door System components, including roller and hanger measurements in millimeters.

9. Garantia i Suport

For warranty information or technical support, please contact Wiltec customer service. Details can typically be found on the Wiltec website or through your point of purchase. Please have your model number (61810) and purchase date available when contacting support.