1. Introducció
The Enermax MAXPRO II series power supply is designed for reliable and efficient operation in desktop personal computers. This manual provides essential information for the safe installation, operation, maintenance, and troubleshooting of your Enermax MaxPro II 700W ATX Power Supply. Please read this manual thoroughly before installation and retain it for future reference.
The MAXPRO II series is characterized by low noise and high efficiency, meeting 80 PLUS 230V EU certification with up to 88% peak efficiency. It features a 120mm high-pressure fan with patented Twister Bearing technology for effective cooling and a SafeGuard multiple safety system to protect against various electrical issues.
Image: The Enermax MaxPro II 700W ATX Power Supply, showcasing its black finish and the fan grille on the top surface.
2. Informació de seguretat
- Always disconnect the power supply from the main AC outlet before installation or maintenance.
- No obriu la font d'alimentació. Alt voltatgetagHi ha peces a l'interior i no hi ha peces que l'usuari pugui reparar. L'obertura de la unitat anul·larà la garantia.
- Assegureu-vos d'una connexió a terra adequada del vostre sistema informàtic.
- Instal·leu la font d'alimentació en una zona ben ventilada, allunyada de fonts de calor i humitat.
- Feu servir només els cables que s'inclouen amb la font d'alimentació.
- Aquest producte està dissenyat només per a ús interior.
3. Configuració i instal·lació
Follow these steps to install your Enermax MaxPro II 700W ATX Power Supply into your computer system.
- Prepareu el vostre sistema: Apagueu l'ordinador i desconnecteu el cable d'alimentació de la presa de corrent. Obriu la carcassa de l'ordinador.
- Traieu la font d'alimentació antiga (si escau): Desconnecta tots els cables de la font d'alimentació antiga a la placa base, la targeta gràfica, les unitats i altres components. Desenrosca i retira la font d'alimentació antiga de la carcassa.
- Install New Power Supply: Carefully place the Enermax MaxPro II power supply into the designated PSU bay in your computer case. Ensure the fan is oriented correctly for optimal airflow (typically facing down if there's a bottom vent, or facing into the case if mounted at the top). Secure the power supply with the provided screws.
- Connectar els cables:
- Mainboard 24-Pin: Connect the large 24-pin connector to your motherboard.
- CPU 4+4-Pin (8-Pin): Connect the 4+4-pin CPU power connector to the corresponding socket on your motherboard.
- PCI-E 6+2-Pin (8-Pin): Connect the 6+2-pin PCI-E connectors to your graphics card(s) as required.
- SATA: Connect SATA power connectors to your SSDs, HDDs, and optical drives.
- 4-Pin Molex: Connect 4-pin Molex connectors to any other peripherals that require them (e.g., case fans, older drives).
The flat cable design of the MAXPRO II allows for easy installation and clean cable management, which also helps improve airflow within your PC case.
Image: Enermax MaxPro II flat cables with labels for Mainboard 24P, CPU 4+4P, PCI-E 6+2P, SATA, and 4P Molex connectors. These cables facilitate organized installation and improved airflow.
- Organitzar els cables: Route cables neatly to ensure proper airflow and prevent interference with other components.
- Tanqueu la caixa i connecteu l'alimentació: Close your computer case, connect the AC power cord to the power supply, and then plug it into a wall outlet.
- Encès: Enceneu l'ordinador.
4. Instruccions de funcionament
4.1. Encendre/apagar
The power supply is controlled by your computer's motherboard. To power on or off your system, use the computer's power button. The power supply also features a physical on/off switch at the rear, next to the AC inlet. This switch should be used to completely cut power to the system when performing maintenance or when the system will be stored for an extended period.
4.2. Efficiency and Energy Saving
The Enermax MaxPro II 700W is 80 PLUS 230V EU certified, achieving up to 88% efficiency at 230VAC between 20% and 100% load. This high efficiency reduces energy consumption and heat generation. The power supply also features a high-efficient 5V standby (+5Vsb) circuitry, enabling systems to meet EU eco-design directives (ErP Lot 6 and ErP Lot 3) with standby consumption less than 0.5 watts (when paired with an ErP-ready motherboard). It fully supports Intel's C6/C7 energy-saving functions.
4.3. Sistema de refrigeració
An integrated 120mm Enermax high-pressure fan with patented Twister Bearing technology provides efficient cooling. The Smart Airflow Control (SAC) design keeps the fan spinning at an almost inaudible 14dB(A) up to a system load of 40%, ensuring quiet operation during typical use.
Imatge: De dalt a baix view of the 120mm fan on the Enermax MaxPro II power supply, featuring the Enermax logo on the fan hub. This fan provides efficient and quiet cooling.
5. Manteniment
The Enermax MaxPro II power supply is designed for long-term, continuous operation with minimal maintenance.
- Neteja de pols: Periodically clean dust from the exterior of the power supply and the fan grille using compressed air or a soft brush. Ensure the power supply is disconnected from the AC outlet before cleaning.
- Flux d'aire: Ensure that the air vents of the power supply are not obstructed to maintain proper airflow and cooling.
- Gestió de cables: Regularly check that all cables are securely connected and not interfering with cooling fans or other components.
- Components interns: Do not attempt to open the power supply unit for internal cleaning or maintenance. This will void the warranty and poses a risk of electric shock.
6. Solució De Problemes
If you encounter issues with your Enermax MaxPro II power supply, refer to the following common troubleshooting steps.
| Problema | Causa possible | Solució |
|---|---|---|
| L'ordinador no s'encén. |
|
|
| El sistema s'encén però s'apaga immediatament. |
|
|
| Fort soroll del ventilador de la font d'alimentació. |
|
|
If these steps do not resolve your issue, please contact Enermax customer support. Do not attempt to repair the power supply yourself.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Enermax |
| Nom del model | MAXPRO II |
| Número de model | EMP700AGT-C |
| Tipus de producte | Font d'alimentació ATX |
| Potència de sortida | 700 watts |
| Certificació d'eficiència | 80 PLUS 230V EU (up to 88% peak efficiency) |
| Mètode de refrigeració | Air (120mm fan with Twister Bearing technology) |
| Color | Negre |
| Dimensions (L x A x A) | 15 x 14 x 8.6 cm |
| Pes | 3.53 lliures (aprox. 1.6 kg) |
| Dispositius compatibles | PC |
| Safety Features (Safeguard) | Protection against short circuit, overvoltage, minvartage, overcurrent, overheating, overpower. |
| Cables | Flat cables for improved cable management and airflow. |
8. Informació de la garantia
The Enermax MaxPro II power supply comes with a 2 any de garantia for spare parts availability. For specific warranty terms and conditions, please refer to the official Enermax weblloc web o poseu-vos en contacte amb el vostre distribuïdor local.
9. Atenció al client
For technical assistance, product inquiries, or warranty claims, please visit the official Enermax weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client.
Enermax Official Weblloc: www.enermax.com
