1. Introducció
The ADJ Pixie-Strip-60 is a 1-meter indoor LED pixel strip designed for professional lighting applications. It features 60 tri-color RGB SMD LEDs, offering vibrant and dynamic lighting effects. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Pixie-Strip-60.
2. Informació de seguretat
- Només per a ús interior: This device is designed for indoor use in dry locations. Do not expose to rain or moisture.
- Font d'alimentació: Assegureu-vos que la font d'alimentació coincideixi amb el voltage requirements of the Pixie Driver 2000 (sold separately) and the Pixie-Strip-60.
- Ventilació: Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- Muntatge: Always secure the fixture using the integrated adjustable mounting bracket and safety cable loop.
- Manteniment: Demaneu totes les tasques de manteniment a personal de servei qualificat. No intenteu reparar la unitat vosaltres mateixos.
3. Contingut del paquet
Comproveu que el vostre paquet contingui els elements següents:
- ADJ Pixie-Strip-60 LED Pixel Strip
- Square frosted lens attachment
- Round frosted lens attachment
- Square smoked lens attachment
- 4-pin power/data cable
- Magnetic end caps (pre-installed or included)
4. Configuració
Follow these steps to set up your Pixie-Strip-60:
- Muntatge: Use the integrated adjustable mounting bracket to securely attach the Pixie-Strip-60 to a truss or other suitable structure. Always use a safety cable through the safety cable loop for added security.
- Fixació de la lent: Select the desired lens attachment (square frosted, round frosted, square smoked, or round smoked) and carefully install it onto the front of the LED strip.
- Connecting to Pixie Driver 2000: The Pixie-Strip-60 requires the Pixie Driver 2000 (sold separately) for power and data. Connect the provided 4-pin combo cable from the Pixie-Strip-60 to the appropriate output port on the Pixie Driver 2000. Ensure connections are firm.
- Connexió en cadena (opcional): For seamless end-to-end pixel spacing, utilize the magnetic end caps to connect multiple Pixie-Strip-60 units. Ensure proper power and data cabling for all connected units, adhering to the maximum pixel limits of the Pixie Driver 2000.
5. Funcionament
The Pixie-Strip-60 is controlled via the Pixie Driver 2000 (sold separately).
- Opcions de control: The Pixie Driver 2000 provides versatile control. It offers simple on-board manual dimming and strobe control for basic operation.
- Pixel Mapping: For advanced control, the Pixie Driver 2000 supports full pixel mapping. It can control up to 2,040 max pixels via Kling-Net protocol and up to 340 max pixels via Art-Net and sACN (streaming ACN) protocols. Refer to the Pixie Driver 2000 manual for detailed pixel mapping instructions.
- Funcionament sense parpelleig: With a refresh rate of 44,000Hz, the Pixie-Strip-60 ensures flicker-free operation, making it suitable for broadcast TV and film applications.
6. Manteniment
Regular maintenance ensures optimal performance and longevity of your Pixie-Strip-60.
- Neteja: Periodically clean the exterior of the unit with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and disconnected before cleaning.
- Cura de les lents: Gently wipe the lens attachments to remove dust or smudges. Avoid scratching the lens surface.
- Emmagatzematge: When not in use, store the Pixie-Strip-60 in a dry, dust-free environment, preferably in its original packaging or a protective case.
7. Solució De Problemes
If you encounter issues with your Pixie-Strip-60, refer to the following common troubleshooting steps:
- Sense energia: Ensure the 4-pin combo cable is securely connected to both the Pixie-Strip-60 and the Pixie Driver 2000. Verify that the Pixie Driver 2000 is powered on and receiving electricity.
- No Data/Incorrect Display: Check all 4-pin combo cable connections. Confirm that the Pixie Driver 2000 is sending the correct data signal and that the Pixie-Strip-60 is configured correctly within the control software (if applicable).
- Parpelleig: While the unit is designed for flicker-free operation, ensure stable power supply and proper data signal. If flickering persists, consult the Pixie Driver 2000 manual or contact support.
- Sobreescalfament: Ensure the unit has adequate ventilation and is not obstructed. If the unit feels excessively hot, power it off and allow it to cool before resuming operation.
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | Pixie-Strip-60 |
| Tipus de LED | 60x Tri-color RGB SMD LEDs |
| Pixel Pitch | 16.5 mm |
| Longitud | 1 Meter (39.6 inches) |
| Freqüència d'actualització | 44,000 Hz |
| Protocols de control | Kling-Net, Art-Net, sACN (via Pixie Driver 2000) |
| Habitatge | Alumini lleuger |
| Connectivitat | Proprietary 4-pin combo cables |
| Accessoris inclosos | Square/Round Frosted/Smoked Lens Attachments, Magnetic End Caps |
| Ús interior/exterior | Interior |
| Pes de l'article | 4.14 lliures |
| Voltage | 12 Volts |
| Wattage | 60 watts |
9. Garantia
The ADJ Pixie-Strip-60 is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official ADJ weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia. Conserveu el comprovant de compra per a reclamacions de garantia.
10. Suport
For technical assistance, service, or any questions regarding your ADJ Pixie-Strip-60, please contact ADJ customer support. Contact information can typically be found on the official ADJ weblloc o a l'embalatge del producte.
