1. Producte acabatview
The SKF LGHP 2/0.4 is a high-performance, high-temperature polyurea grease designed for a wide range of industrial and mechanical applications. It is formulated to provide excellent lubrication and protection under demanding conditions, including high temperatures and heavy loads. This grease is suitable for electric motors, fans, pumps, and other machinery requiring long-term lubrication.
Figure 1: SKF LGHP 2/0.4 High Performance, High Temperature Grease cartridge. This image shows a single cartridge of SKF LGHP 2/0.4 high performance, high temperature grease, featuring blue and white labeling with product details and the SKF logo.
2. Informació de seguretat
Always observe the following safety precautions when handling and applying SKF LGHP 2/0.4 grease:
- Equips de protecció individual (EPI): Wear appropriate gloves and eye protection to prevent skin and eye contact.
- Ventilació: Use in a well-ventilated area. Avoid breathing vapors or mists.
- Emmagatzematge: Store in a cool, dry place, away from direct sunlight and sources of ignition. Keep container tightly closed when not in use.
- Eliminació: Dispose of used grease and empty containers in accordance with local environmental regulations. Do not discharge into drains or watercourses.
- Primers auxilis:
- Contacte amb els ulls: Rinse immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.
- Contacte amb la pell: Rentar bé amb aigua i sabó. Traieu la roba contaminada.
- Inhalació: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
- Ingestió: Do NOT induce vomiting. Call a poison control center or doctor immediately.
Refer to the Safety Data Sheet (SDS) for more detailed safety information.
3. Emmagatzematge i manipulació
Proper storage and handling are crucial for maintaining the quality and performance of SKF LGHP 2/0.4 grease.
- Store the grease cartridges in their original, unopened packaging.
- Keep containers tightly sealed to prevent contamination and exposure to air or moisture.
- Ideal storage temperature range is typically between 0°C and 40°C (32°F and 104°F). Avoid extreme temperatures.
- Do not store near strong oxidizing agents or open flames.
- Ensure the storage area is clean, dry, and well-ventilated.
4. Pautes de sol·licitud
4.1. Preparació
- Ensure the application area is clean and free from dirt, dust, and old grease.
- If replacing an existing grease, ensure compatibility or thoroughly clean the component before applying SKF LGHP 2/0.4.
- Use a clean grease gun or appropriate dispensing tool for application.
4.2. Application Procedure
SKF LGHP 2/0.4 is typically applied using a standard grease gun. The amount and frequency of application depend on the specific machinery, operating conditions, and manufacturer's recommendations.
- For Bearings: Apply grease until a slight bead appears at the seals, or as recommended by the bearing manufacturer. Avoid over-greasing, which can lead to excessive heat generation.
- For General Lubrication Points: Apply a sufficient amount to ensure adequate coverage and lubrication of moving parts.
- Regresarasing Intervals: Follow the equipment manufacturer's guidelines for regreasing intervals. Factors such as operating temperature, speed, load, and environment will influence the required frequency.
4.3. Compatibilitat
SKF LGHP 2/0.4 is a polyurea-based grease. While it offers good compatibility with many other greases, it is generally recommended to avoid mixing different types of greases unless compatibility has been confirmed. Mixing incompatible greases can lead to reduced performance or premature component failure.
5. Manteniment
Regular maintenance involving proper lubrication is key to extending the life of your machinery. This includes:
- Inspecció periòdica: Periodically inspect lubricated components for signs of wear, contamination, or insufficient grease.
- Neteja: Maintain a clean working environment to prevent contaminants from entering lubrication points.
- Eines adequades: Use clean and well-maintained grease guns and dispensing equipment.
6. Resolució de problemes comuns
| Problema | Causa possible | Solució |
|---|---|---|
| Falla prematura del coixinet | Insufficient lubrication, contamination, incompatible grease mixture, over-greasing. | Check lubrication schedule and quantity. Ensure cleanliness. Avoid mixing greases. Do not over-grease. |
| Grease leakage from seals | Over-greasing, damaged seals, incorrect grease consistency. | Reduce grease quantity. Inspect and replace seals if damaged. Ensure correct grease for application. |
| Grease hardening or degradation | Exposure to extreme temperatures, contamination, prolonged storage, incompatible mixture. | Store properly. Prevent contamination. Use within shelf life. Avoid mixing greases. |
7. Especificacions del producte
| Propietat | Valor |
|---|---|
| Marca | SKF |
| Número de model | LGHP 2/0.4-SINGLE |
| Informació del paquet | Cartutx |
| Volum líquid | 420 mil·lilitres |
| Pes de l'article | 1 lliura (aprox. 0.45 kg) |
| Usos recomanats | Mechanical, Industrial |
| Viscosity (at 40 °C) | 96 mm²/s |
| Classificació de temperatura superior | 150 °C (302 °F) |
| Formulari d'article | Greix |
| UPC | 645759357144 |
| Dimensions del paquet | 13.11 x 3.19 x 3.03 polzades |
8. Suport i informació de contacte
For further assistance, technical support, or inquiries regarding SKF LGHP 2/0.4 grease, please contact SKF directly or visit their official weblloc.
- SKF Official Weblloc: www.skf.com
- Atenció al client: Refer to the SKF weblloc web amb informació de contacte regional.
8.1. Informació de la garantia
SKF products are manufactured to high-quality standards. For specific warranty terms and conditions related to SKF LGHP 2/0.4 grease, please consult the official SKF warranty policy available on their website or contact SKF customer service. Warranty typically covers manufacturing defects and material quality under normal use and storage conditions.
