Manual d'usuari de la càmera d'acció RunCam 5 4K FPV

1. Introducció

The RunCam 5 is a compact and lightweight 4K FPV (First Person View) action camera designed for racing drones and sport video recording. It features a high-performance image sensor and an upgraded CPU for efficient video processing and extended recording times. This manual provides essential information for setting up, operating, and maintaining your RunCam 5 camera.

Figura 1: Davant view of the RunCam 5 4K FPV Action Camera. This image displays the camera's compact, orange cube-shaped body with the lens prominently featured on the front face.

2. Producte acabatview

2.1 Característiques clau

• Disseny compacte: Weighs only 56g with dimensions of 38mm x 38mm x 36mm.
• Vídeo d'alta resolució: Supports 4K at 30fps, 2.7K at 50fps, 1080P at 120fps, 1080P at 60fps, and 1440P at 60fps.
• Sensor avançat: Equipped with a Sony IMX377 12MP image sensor and Electronic Image Stabilization (EIS) for smooth, high-quality video.
• Durada de la bateria ampliada: Upgraded CPU offers ultra-low power consumption, providing up to 105 minutes of 4K recording or 120 minutes of 1080p/60fps recording.
• Camp Ampli de View: 145° FOV for immersive footage.
• Ús versàtil: Ideal for FPV drones, compatible with Hero Session 5 mount bases, and suitable for various action camera applications.

2.2 Components de la càmera

Figura 2: Diagram illustrating the key components of the RunCam 5 camera. Each component is numbered for easy identification.

1. Botó de l'obturador: Used to power on/off the camera and start/stop recording.
2. Camera Status Light (LED): Indicates camera status, such as recording, charging, or standby.
3. Botó de restabliment: Used to reset the camera to factory settings or resolve unresponsive states.
4. Ranura per a targeta SD: Insert your MicroSD card here.
5. SD Card Locking Door: Secures the MicroSD card in place.
6. Port micro USB: For charging the camera and connecting to a computer for data transfer.

3. Configuració

3.1 Càrrega de la bateria

Before first use, fully charge the camera's internal 900mAh battery. Connect the camera to a 5-15V DC power source using the provided Micro-USB cable. The Camera Status Light (LED) will indicate the charging status (e.g., solid red while charging, off when fully charged).

3.2 Inserció de la targeta MicroSD

1. Locate the SD Card Slot (4) and SD Card Locking Door (5) on the side of the camera (refer to Figure 2).
2. Open the SD Card Locking Door.
3. Insert a MicroSD card (up to 128GB) into the slot with the contacts facing down. Ensure the card is formatted to FAT32. For 2.7K50fps or 1080P120fps recording, a U3 or higher speed rating is recommended. For other resolutions, U1 or higher is sufficient.
4. Close the SD Card Locking Door securely.

4. Funcionament de la càmera

4.1 Encès/Apagat

• Encès: Press and hold the Shutter Button (1) for approximately 3 seconds until the Camera Status Light (LED) illuminates.
• Apagar: Press and hold the Shutter Button (1) for approximately 3 seconds until the Camera Status Light (LED) turns off.

4.2 Gravació de vídeo

• Comença a gravar: With the camera powered on, briefly press the Shutter Button (1). The Camera Status Light (LED) will change to indicate recording is in progress (e.g., flashing red).
• Atura la gravació: Briefly press the Shutter Button (1) again. The Camera Status Light (LED) will return to its standby state.

4.3 Modes i configuracions de vídeo

The RunCam 5 supports various video resolutions and frame rates. Specific settings like resolution, TV mode (NTSC/PAL), and other parameters can typically be configured via a configuration file on the MicroSD card or a dedicated mobile application (if available for your model). Refer to the official RunCam website for the latest software and configuration tools.

Figura 3: Recording time comparison chart. This graph illustrates the extended recording capabilities of the RunCam 5 (orange bars) compared to previous models (black bars) across different resolutions like 4K 30fps, 1440P 60fps, and 1080P 60fps.

5. Manteniment

• Neteja: Use a soft, dry cloth to clean the camera body. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.
• Emmagatzematge: Guardeu la càmera en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Cura de la bateria: For long-term storage, ensure the battery is charged to approximately 50%. Avoid fully discharging the battery for extended periods.

6. Solució De Problemes

• La càmera no s'encén: Ensure the battery is sufficiently charged. If the issue persists, try pressing the Reset Button (3) with a small pin.
• Errors d'enregistrament: Verify that the MicroSD card is correctly inserted and formatted to FAT32. Ensure the card has sufficient free space and meets the recommended speed class (U3 for high-resolution recording).
• Càmera que no respon: If the camera becomes unresponsive, press the Reset Button (3) with a small pin to restart it.
• Poca qualitat de vídeo: Check the lens for dirt or smudges. Ensure adequate lighting conditions for optimal performance.

7. Especificacions

8. Garantia i Suport

For warranty information, technical support, or to access additional resources, please visit the official RunCam weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. També podeu trobar més informació i productes a RunCam Store on Amazon.